Research and numerical simulation analysis on forging process of 7055 aluminum alloy quick release hook
DOI: 10.23977/jmpd.2024.080109 | Downloads: 3 | Views: 70
Author(s)
Teng Niu 1, Shoujun Liu 1, Leigang Wang 1, Youcai Zhou 2
Affiliation(s)
1 Jiangsu University, Zhenjiang, Jiangsu, China
2 Kunshan Huizhong Machine Co, Ltd, Kunshan, Jiangsu, China
Corresponding Author
Teng NiuABSTRACT
Aiming at the quick release hook of 7055 aluminum alloy, through analyzing the structure of the quick release hook, the forging drawing and die drawing of the parts are designed. The process route of parts forming is designed by empirical method, and the process route is numerically simulated by DEFOEM-3D. The results show that the forging structure is complex, the fluidity of materials is weak, and the flow speed of metal materials is uneven, resulting in defects. Therefore, the process route was optimized according to the defects and verified by finite element simulation. The results showed that the metal flow was reasonable and the defects disappeared, and finally the qualified process route was obtained.
KEYWORDS
7055 aluminum alloy; Forging; Numerical simulation; Process optimizationCITE THIS PAPER
Teng Niu, Shoujun Liu, Leigang Wang, Youcai Zhou, Research and numerical simulation analysis on forging process of 7055 aluminum alloy quick release hook. Journal of Materials, Processing and Design (2024) Vol. 8: 69-77. DOI: http://dx.doi.org/10.23977/jmpd.2024.080109.
REFERENCES
[1] Heinz A, Haszler A, Keidel C, et al. Recent development in aluminum alloys for aerospace applications [J]. Materials Science and Engineering A, 2000, 280(1): 102-107
[2] Williams James C, Starke Jr Edgar A. Progress in structural materials for aerospace systems [J]. Acta materials, 2003, 51(19): 5775-5799.
[3] Cao F, Qin Z. Effect of two-stage aging on hardness and electical conductivity of as-extruded 7075 Aluminum Alloy[J]. Journal of Physic: Conference Series, 2021, 1885(4):042035.
[4] Umamaheshwer A. C, Raov, V, Asu M, et al. Stess corrosion cracking behavior of 7xx aluminum alloys: A literature review [J Transactions of Nonferrous Metals of China. 2016(26):1447-1471.
[5] Dai Y, Yan L, Hao J. Review on Micro-Alloying and Preparation Method of 7xxx Series Aluminum Alloys: Progresses and Prospects [J]. Materials (Basel, Switzerland), 2022, 15(3):1216.
[6] Feng D, Zhang X M, Liu S D, et al. Non-isothermal "Retrogression and Re-ageing" Treatment Schedule for AA7055 Thick Plate[J]. Materials & Design, 2014, 60(8):208-217.
Downloads: | 2020 |
---|---|
Visits: | 107005 |
Sponsors, Associates, and Links
-
Forging and Forming
-
Composites and Nano Engineering
-
Metallic foams
-
Smart Structures, Materials and Systems
-
Chemistry and Physics of Polymers
-
Analytical Chemistry: A Journal
-
Modern Physical Chemistry Research
-
Inorganic Chemistry: A Journal
-
Organic Chemistry: A Journal
-
Progress in Materials Chemistry and Physics
-
Transactions on Industrial Catalysis
-
Fuels and Combustion
-
Casting, Welding and Solidification
-
Journal of Membrane Technology
-
Journal of Heat Treatment and Surface Engineering
-
Trends in Biochemical Engineering
-
Ceramic and Glass Technology
-
Transactions on Metals and Alloys
-
High Performance Structures and Materials
-
Rheology Letters
-
Plasticity Frontiers
-
Corrosion and Wear of Materials
-
Fluids, Heat and Mass Transfer
-
International Journal of Geochemistry
-
Diamond and Carbon Materials
-
Advances in Magnetism and Magnetic Materials
-
Advances in Fuel Cell
-
Journal of Biomaterials and Biomechanics