UNIV. NEWS. NORTH-CAUCAS. REG. TECHNICAL SCIENCES SERIES. 2023; 4: 85-90
http://dx.doi.org/http://dx.doi.org/10.17213/1560-3644-2023-4-85-90
On the applicability of the method of correcting defects in cast iron body casting
Irina V. Selevtsova – Cand. Sci. (Eng.), Associate Professor, Department «Mechanical Engineering Technology, Technological Machines and Equipment», Platov South-Russian State Polytechnic University (NPI), Novocherkassk, Russia. irinasiv@mail.ru.
Tatyana V. Dorf – Cand. Sci. (Econ.), Associate Professor, Department «Mathematics and Mathematical Modelling», Platov South-Russian State Polytechnic University (NPI), Novocherkassk, Russia. tavido@mail.ru.
Abstract
The purpose of the presented work is industrial testing of the polymer impregnation composition ANACROL–2505 in solving the problem of eliminating leaks in the places of installation of cast iron body castings. The technology of correction of casting defects is investigated, the optimal sequence of technological operations is determined, industrial tests are carried out. The specified goal has been achieved, the results of the work performed are described and the prospects of the chosen method for practice are shown.
For citation: Selevtsova I.V., Dorf T.V. On the applicability of the method of correcting defects in cast iron body casting. Izv. vuzov. Sev.-Kavk. region. Techn. nauki=Bulletin of Higher Educational Institutions. North Caucasus Region. Technical Sciences. 2023;(4):85-90. (In Russ.). http://dx.doi.org/10.17213/1560-3644-2023-4-85-90
Keywords: method, casting, defect, casting sink, weld, chaplet, impregnation, leak-tightness
Full text: [in elibrary.ru]
References
- Girshovich N.G. Handbook of iron casting. 3rd edition., revised and expanded. Leningrad: Mashinostroenie, Leningrad department. 1978. 758 p. (In Russ.)
- Lakedemonsky A.V., Kvasha F.S. et al. Foundry defects and ways to eliminate them. Moscow: Mashinostroenie.1972. 152 p. (In Russ.)
- Selevtsova I.V. Defects of castings and methods of their correction. Integration of science and practice as a mechanism for the development of home science-intensive production technologies: collection of scientific articles based on the materials of the VII All-Russian Scientific and Practical Conference. Kamensk-Shakhtinsky, Feb.20, 2018. Platov South Russia State Polytechnic University (NPI) named after M.I. Platov. Noovocherkassk: Lik. 2018. P. 343-347.
- Kategorenko Yu.I. et al. Technology of foundry production: textbook 2nd ed., revised and expanded. Yekaterinburg: Publishing house of the Russian State Prof. PED. UN-Ta.2018. 684p. (In Russ.)
- Selevtsova I.V. The influence of the technology of manufacturing blanks of parts on the quality of products in mechanical engineering.Izv. vuzov. Sev.-Kavk. region. Techn. nauki= Bulletin of Higher Educational Institutions. North Caucasus Region.Technical Sciences. 2011;(2): 75-78. (In Russ.)
- Site Materials of LLC NPP «Saturn». Available at: https://www.anacrol.ru/Produkciya/ANAKROL-2505 (accessed 06.04.2023).
- Churkin B.S. Theory of casting processes: textbook. Yekaterinburg: RGPPU, 2006. 453 p. (In Russ.)
- 8. Foundry production: Textbook for metallurgical specialties of universities. 2nd edition., revised and expanded. Moscow: Mashinostroenie.1987. 256 p. (In Russ.)
- Vozdvizhensky V.M., Zhukov A.A., Bastrakov V.K. Quality control of castings: Textbook for universities. Moscow: Mashinostroenie. 1990. 237 p. (In Russ.)
- Voronin Yu.F., Kamaev V.A. Atlas of casting defects. Ferrous alloys. Moscow: Mashinostroenie-1.2005. 327 p. (In Russ.)