PEMANFAATAN DEM-SRTM DAN DEM-NAS SEBAGAI DASAR SIMULASI HUJAN-DEBIT DI DAS KALIWADAS

Sukandi Samatan
Universitas Gunadarma
Indonesia
Heri Suprapto
Universitas Gunadarma
Indonesia

Abstract
The accuracy of flow prediction in a watershed for water resource development is highly dependent on various factors such as the transformation model used, the availability and accuracy of hydrological data and watershed characteristics such as topography, drainage networks, land cover and soil texture. Watershed characteristics are considered as the most dominant determinants in various hydrological analyzes, especially with regard to the data used to compile the watershed model, in this case the Digital Elevatian Model (DEM) data. This study aims to develop a watershed model based on National DEM (DEMNAS) data to estimate daily discharge using the HEC-HMS model and design discharge using the Nakayasu Synthetic Unit Hydrograph (SUH) method. The research was conducted in the Kaliwadas watershed, which is located in Kandang Serang District, Pekalongan Regency, Central Java Province. Kaliwadas River is one of the sub-watersheds with a drainage area of approximately 165.78 km2 which has a good enough potential to supply hydro-based electricity. The performance of the DAS model formed with DEMNAS data is compared with the performance of the watershed model formed with the DEM Shuttle Radar Topography Mission (SRTM) data, where these two DEM data have a resolution of 8 meters and 90 meters, respectively. Performance testing is based on the Root Mean Square Error (RMSE) number of the two predictive flow from the HEC-HMS Model to the observed discharge. The results showed that the estimated discharge of the HEC-HMS Model using the DEMNAS Watershed Model showed slightly better performance than using the SRTM DAS Model, with a RMSE difference of 0.27.
Keywords
DEM-SRTM; DEM-NAS,;hydrological model; watershed model
References

Ahmed, S.A., Chandrashekarappa, K.N., Raj, S.K., Nischitha, V., and Kavitha, G., (2010). Evaluation of Morphometric Parameters Derived from ASTER and SRTM DEM – A study on Bandihole Sub-watershed Basin in Karnataka. Journal of the Indian Society of Remote Sensing, Vol. 38, pp. 227-238.

Cheng, C., Cheng, S., Wen, J., and Lee, J. (2013). Time and Flow Characteristics of Component Hydrographs Related to Rainfall–Streamflow Observations. Journal of Hydrologic Engineering, Vol. 18, No. 6, pp. 675-688.

Halwatura D. and Najim M.M.M. (2013). Application of The HEC-HMS Model for Runoff Simulation in a Tropical Catchment. Environmental Modelling & Software, Vol. 46, pp. 155-162.

Harto, S. (2000). Hidrologi : Teori, Masalah dan Penyelesaian. Nafiri Offset, Yogyakarta.

Hassan, A.K.M.B., Heather M., Jarrett P., and Amine M. (2017). Application of HEC-HMS in a Cold Region Watershed and Use of RADARSAT-2 Soil Moisture in Initializing the Model. Hydrology, Vol. 4, No. 9, pp. 1-19.

Himanshu, S.K., Garg, N., Rautela, S., Anuja, K.M., and Tiwari, M. (2013). Remote Sensing and GIS Applications in Determination of Geomorphological Parameters and Design Flood for a Himalyan River Basin, India. International Research Journal of Earth Sciences, Vol. 1, No. 3, pp. 11-15.

Konadu, D.D. and Fosu, C. (2009). Digital Elevation Models and GIS for Watershed Modelling and Flood Prediction – A Case Study of Accra Ghana. Appropriate Technologies for Environmental Protection in the Developing World, pp. 325-332.

Li, Z. (2014). Watershed Modeling Using Arc Hydro Based on DEMs: A Case Study in Jackpine Watershed. Environmental Systems Research, Vol. 3, pp. 1-12.

Mangan, P., Haq, MA., and Baral, P. (2019). Morphometric Analysis of Watershed Using Remote Sensing and GIS-A Case Study of Nanganji River Basin in Tamil Nadu, India. Arabian Journal of Geosciences, Vol. 12, No. 202, pp. 1-14.

Mather, M. and Tso, B. (2016). Classification Methods for Remotely Sensed Data, CRC Press, Boca Raton, Florida, USA.

Reshma T., Venkata R.K., and Deva P. (2013). Simulation of Event Based Runoff Using HEC-HMS Model for an Experimental Watershed. International Journal of Hydraulic Engineering, Vol. 2, No. 2, pp. 28-33.

Romali, N.S., Yusop, S., and Ismail, A.Z. (2017). Hydrological Modelling Using HEC-HMS for Flood Risk Assessment of Segamat Town, Malaysia. Materials Science and Engineering, Vol. 318, pp. 1-6.

Salami, A.W., Bilewu, S.O., Ibitoye, A.B., and Ayanshola A.M. (2017). Runoff Hydrographs Using Snyder And SCS Synthetic Unit Hydrograph Methods: a Case Study of Selected Rivers in South West Nigeria. Journal of Ecological Engineering, Vol 18, No. 1, pp. 25-34.

Samatan, S. (2020). Perbandingan Perkiraan Debit Banjir Rancangan Menggunakan Data Hujan dan Debit di DAS Kaliwadas Kab. Pekalongan, Jawa Tengah. Rekonstruksi Tadulako: Civil Engineering Journal on Research and Development. Vol. 1, No. 2, pp. 1-8.

Ishak, M.G., Tunas, I.G., Herman, R. Setiyawan, and Arafat, Y. (2021). Flow Simulation using 2D Hydrodynamic Model at the Palu Estuary Based on National DEM Source Data. International Journal of Design & Nature and Ecodynamics, Vol. 16, No. 6, pp. 709-715.

Shodiq, A.M., Sobatnu, F,. dan Inayah N. (2022). Analisis Aspek Geometrik Genangan Banjir Menggunakan Data DEMNAS. Jurnal INTEKNA : Informasi Teknik Dan Niaga, Vol. 22, No. 1, pp. 51–59

Putra, M.H.Z., Dinata, I.A., Sadisun, I.A., Sarah, D., Aulia, A.N., and Sukristiyanti. (2022). Modeling of Individual Debris Flows Based on DEMNAS Using Flow-R: A Case Study in Sigi, Central Sulawesi. Riset Geologi dan Pertambangan: Indonesian Journal of Geology and Mining, Vol. 32, No. 1 pp. 37-58.

Information
PDF
228 times PDF : 132 times
Article Tools



Email the author (##plugins.block.readingTools.loginRequired##)