Enhanced Bismuth-based Photocatalysis Applied to Environmental Remediation

Abstract

The basis of prosperity of 20th centrury is oil. As oil is going to be used up, people need to find alternatives to meet the earth’s energy demand in 21st centrury. For each second, there are about 1.2×1017 J energy hitting the earth. The energy in 1 hour of sunlight is about 4.32×1020 J, which almost meets the energy consumed on earth in 2016. It determines solar energy may be a potential candidate to solve the energy crisis. As for techniques to utilize solar energy, the most popular one is using photovoltaic (PV) cells. PV cell is a device to convert solar energy into electricity. There are also some other techniques trying to utilize solar energy. Photocatalysis is one of them, which is to convert solar energy into chemical energy. Applications of photocatalysis have extended from hydrogen evolution via water splitting to environemtnal remediation, CO2/ N2 reduction and so on. Photocatalysis, as an advanced oxidation process, has been extensively studied and applied to the purification and remediation of contaminated water and wastewater, and exhibits advantages over conventional treatment technologies. When considering solar energy as an energy source for photocatalysis, it is key to prepare visible light-responsive materials. Bismuth-based semiconductors are promising materials as visible light-responsive photocatalysts primarily due to their suitable band gaps, well-dispersed valence bands, and commercial availabilities at reasonable costs, as well as the possibility of preparing them under mild conditions. Recent work focusing on the preparation, characterization and activity testing of bismuth-based photo-active materials as well as their associated photoreactor designs are introduced herein. In order to enhance the photocatalytic activities of the new materials, different precursors, additives, preparation procedures and process parameters, as well as surface treatments were explored to obtain binary and ternary heterostructures, with different doping, surface modification, nanoparticle sizes and morphologies. It was found that formation of heterojunction and loading metal nanoparticle on the surface are very effective to imrove the photocatalytic activity of the support. In this work, we found that palladium nanoparticles modified BiVO4 exhibited excellent activity in the decomposition of phenol, which was even higher than TiO2. To facilitate the separation process of catalysis particels from a slurry system, magnetically separable composites were also prepared, and it was found that it is very effective to remove the particles from the slurry system using external magnets. To further scale up this process, two different types of immbolized photoreactors (flat-plate and packed beads photoreactor) were also developed. Suggestions were made for further work in this research area.