Scientific journal
Bulletin of Higher Educational Institutions
North Caucasus region

TECHNICAL SCIENCES


UNIV. NEWS. NORTH-CAUCAS. REG. TECHNICAL SCIENCES SERIES. 2015; 1: 96-101

 

http://dx.doi.org/10.17213/0321-2653-2015-1-96-101

 

ANALYSIS OF INFLUENCE OF GEOMETRIC PARAMETERS AIR SPRING RUBBER-SHELL WITH SUSPENSION TOROIDAL TYPE ATS ITS PERFORMANCE

A.B. Chernenko, A.D. Efimov, A.A. Azarenkov

Chernenko Andrey  Borisovich – Candidate of Technical Sciences, assistant professor, department «CAR and Traffic Safety» Adyghe branch of Platov South-Russian State Polytechnic University (NPI), Novocherkassk, Russia.

Efimov Artem Dmitrievich – Candidate of Technical Sciences, assistant professor, department «Road Transport and Traffic Management», Platov South-Russian State Polytechnic University (NPI), Novocherkassk, Russia. E-mail: e1984ad@mail.ru

Azarenkov Andrey Aleksandrovich – assistant professor, department «Road Transport and Traffic Management», Platov South-Russian State Polytechnic University (NPI), Novocherkassk, Russia.

 

Abstract

Calculations of the transverse ruggedness of pneumoelements with a rubber-cord casing of toroidal type with various relationships of critical bucklings that had allow to instal effect of critical bucklings of a pneumatic elastic element on it load characteristics who confirmed the conjecture of possibility of creation of pneumatic insulators of vibration for various systems of a secondary cushioning of multiaxis cars with beforehand set desirable performances was ma. And also the conduct probes had allow to instal intervals of a variation critical bucklings at the solution of a problem of a synthesis of a pneumatic elastic element with a rubber-cord casing of toroidal type with performances close to the optimum.

 

Keywords: rubber-cord casing; pneumatic elastic element; torus; cushioning.

 

Full text: [in elibrary.ru]

 

References

References

1. Chernenko A.B., Gasanov B.G.  Pnevmaticheskie sistemy vtorichnogo podressorivaniya kabin mnogoosnyh avtomobilej [Pneumatic systems of secondary cushioning of cabins of multiaxis cars].  Novocherkassk, SRSTU, 2012, 156 p.

2. Chernenko A.B., Efimov A.D. Model' pnevmaticheskogo uprugogo `elementa s rezino-kordnoj obolochkoj toroidnogo tipa [Model's of a pneumatic elastic element with a rubber-cord casing of toroidal type]. Izvestiya VUZov. Severo-Kavkazskij region. Tehnicheskie nauki, 2012, no. 4, pp. 63-66.

3. Pnevmaticheskaya vibroizoliruyuschaya opora [Pneumatic shock absorbers bearing part.]. A.s.,  no 1677405 SSSR, 1988.

4. Chernenko A.B. Sozdanie i issledovanie pnevmaticheskoj sistemy podressorivaniya kabiny mnogoosnyh avtomobilej: avtoref. dis. kand. tehn. nauk [Creation's and probe of pneumatic system of cushioning of a cabin of multiaxis cars: author's PhD thesis]. Moscow, 1991.

5. Chernenko A.B. `Eksperimental'nye amplitudno-chastotnye harakteristiki sistem podressorivaniya kabin mnogoosnyh avtomobilej [Experimental's amplitude-frequency characteristics of systems of cushioning of cabins of multiaxis cars]. Izvestiya VUZov. Mashinostroenie, 1990, no. 8, pp. 42.

6. Chernenko A.B., Galashin V.A., Borodin V.P. [Pneumatic suspender of cabins of cargo vehicles]. Uluchshenie `ekologicheskih harakteristik avtomobilej i traktorov, problemy snizheniya shuma, vibracii i toksichnosti avtomobilej : tez. dokl. Otrasl. nauch.-tehn. seminara, 24-26 okt. 1989 g [Martempering of ecological performances of cars and tractors, problems of noise abatement, vibration and toxicity of cars: abstracts of scientific and technological industry seminar, Oct. 24-26 1989].  Moscow, NICIAMT, 1989, pp 38-39 . (In Russian).

7. Biderman V.L. [Calculation of rubber-cord pneumatic shock absorbers].  Raschety na prochnost'  [Strength analysis].Moscow, 1960, p. 176. (In Russian).

8. Kuznecov Yu.I. Sintez rezinokordnyh uprugih `elementov pnevmaticheskih podvesok kolesnyh mashin: avtoref. dis. kand. tehn. Nauk [Synthesis of rubber-cord elastic elements of pneumatic suspension wheeled vehicles: author's PhD thesis]. Moscow, 1976.

9. Perederij V.G., Chernenko A.B., Kuznecov A.A., Mironova S.N. [Estimation's of efficiency of application pneumatic the antivibration of bearing parts with a rubber-cord casing of toroidal type in systems of secondary cushioning of multiaxis cars]. Problemy kachestva i `ekspluatacii avtotransportnyh sredstv : materialy VI Mezhdunar. nauch.-tehn. konf., g. Penza, 18-20 maya 2010 g. [Problems of quality and maintenance of vehicles: Materials VI International Scientific and Technical Conference, Penza, May 18-20, 2010 / Penza State University of Architecture and Construction]. Penza, PGUAS, 2010,  vol. 1, pp 157-163. (In Russian).

10. Chernenko A.B., Nefedov V.V. [Mechanical characteristics of pneumatic elastic elements in systems of secondary cushioning of multiaxis cars]. Mehatronika i robototehnika. Sovremennoe sostoyanie i tendencii razvitiya : sb. tez. i statej Vseros. konf. s `elementami nauch. shkoly dlya molodezhi, g. Novocherkassk, 20-24 sent. 2010 g. [Mechatronics and Robotics: сurrent state and development trends: book of abstracts and articles All-Russian Conference with elements of scientific school for youth, Novocherkassk, 20-24 сент. 2010].  Novocherkassk , LIK Publ., 2010, pp. 99-104. (In Russian).