文章摘要
焦冬冬,王君,耿钊,苗梅,张景智.Mono Wire 0.35UT钢丝帘线在轿车子午线轮胎带束层中的应用[J].轮胎工业,2022,42(10):0606-0610 本文二维码信息
二维码(扫一下试试看!)
Mono Wire 0.35UT钢丝帘线在轿车子午线轮胎带束层中的应用
Application of Mono Wire 0.35UT Steel Cord in Belt of Passenger Car Radial Tire
投稿时间:2022-01-14  修订日期:2022-01-14
DOI:10.12135/j.issn.1006-8171.2022.10.0606
中文关键词: 钢丝帘线  轿车子午线轮胎  带束层  滚动阻力  成品轮胎性能
英文关键词: steel cord  passenger car radial tire  belt  rolling resistance  finished tire performance
基金项目:
中图分类号:
作者单位E-mail
焦冬冬* 青岛双星轮胎工业有限公司 jiaodongdong08512@163.com 
王君 青岛双星轮胎工业有限公司  
耿钊 青岛双星轮胎工业有限公司  
苗梅 青岛双星轮胎工业有限公司  
张景智 青岛双星轮胎工业有限公司  
摘要点击次数: 649
全文下载次数: 411
中文摘要:
      研究Mono Wire 0.35UT钢丝帘线在轿车子午线轮胎带束层中的应用。结果表明:与2×0.30ST钢丝帘线相比,Mono Wire 0.35UT钢丝帘线的直径和破断力减小,粘合性能稳定性更优;以Mono Wire 0.35UT钢丝帘线替代2×0.30ST钢丝帘线用于205/55R16轿车子午线轮胎带束层中,成品轮胎的质量减小,滚动阻力降低,压穿强度、脱圈阻力、高速性能和耐久性能相近,成品钢丝帘线湿热老化后的剥离力提高。
英文摘要:
      The application of mono wire 0.35UT steel cord in the belt of passenger car radial tire was studied.The results showed that compared with 2×0.30ST steel cord,the diameter and breaking force of mono wire 0.35UT steel cord were decreased and the stability of adhesion was better.Using Mono Wire 0.35UT steel cord instead of 2×0.30ST steel cord in the belt of 205/55R16 passenger car radial tire,the quality of the finished tire was reduced,the rolling resistance was decreased,the puncture strength,bead unseating resistance,high-speed performance and durability were similar,and the release force of steel cord in finished tire after wet and heat aging was improved.
Author NameAffiliationE-mail
a a jiaodongdong08512@163.com 
a a  
a a  
a a  
a a  
查看全文   查看/发表评论  下载PDF阅读器
关闭