期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:薛向珍,王三民,袁茹.渐开线花键副微动磨损疲劳寿命预估[J].哈尔滨工业大学学报,2016,48(1):141.DOI:10.11918/j.issn.0367-6234.2016.01.021
XUE Xiangzhen,WANG Sanmin,YUAN Ru.Fretting wear-fatigue predictions in a spline couplings[J].Journal of Harbin Institute of Technology,2016,48(1):141.DOI:10.11918/j.issn.0367-6234.2016.01.021
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 3057次   下载 1502 本文二维码信息
码上扫一扫!
分享到: 微信 更多
渐开线花键副微动磨损疲劳寿命预估
薛向珍, 王三民, 袁茹
(西北工业大学 机电学院,710072 西安)
摘要:
为准确预估渐开线花键副微动磨损疲劳寿命,在假设微动磨损与微动疲劳共同作用的情况下,对某型机主减速器花键副的微动损伤机理进行研究.分析国内外现有的微动疲劳预测方法,在传统SWT法预估疲劳寿命的基础上,忽略疲劳发生的位置和方向,给出花键副的损伤累积计算方法,在给定工况下预估航空花键副微动磨损疲劳寿命.结果表明:花键副微动作用过程中,微动磨损与微动疲劳互相竞争互相抑制,最终导致花键副在两种微动模式共同作用下发生疲劳失效;花键副的疲劳寿命随着SWT值的增大而减小.提出的损伤累积模型能较准确地反映微动磨损对微动疲劳的作用,为花键副的设计和维修提供了数值参考,也为进一步研究考虑齿侧间隙时的花键副微动磨损疲劳寿命预估提供了依据.
关键词:  微动磨损  微动疲劳  有限元  疲劳寿命  损伤机理
DOI:10.11918/j.issn.0367-6234.2016.01.021
分类号:V233.1
文献标识码:A
基金项目:国家高技术研究发展计划(2009AA04Z404).
Fretting wear-fatigue predictions in a spline couplings
XUE Xiangzhen, WANG Sanmin, YUAN Ru
(School of Mechanical Engineering, Northwestern Polytechnical University, 710072 Xi′an, China)
Abstract:
To forecast the fatigue life of spline couplings accurately, taking the interaction of fretting wear and fretting fatigue into account, the fretting damage mechanism of a spline coupling was investigated, the prediction methods of fretting fatigue were analyzed, and by ignoring the position and direction of fatigue occurring, a new damage accumulation method based on SWT method for spline was provided, and the fretting fatigue life of this spline coupling under the given conditions was predicted. The results show that in the fretting process of spline coupling fretting wear and fretting fatigue competes and restrains with each other and leads to the spline coupling fatigue failure under the effect of two fretting modes eventually, the fatigue life of the spline coupling decreases with the SWT increasing. The damage accumulation method can reflect the effect of fretting wear on the fretting fatigue accurately, it gives a numerical reference for the designing and repairing of spline coupling, and at the same time, it also provides a basis for the further study of prediction fretting fatigue life in spline couplings which have clearance between the teeth.
Key words:  fretting wear  fretting fatigue  finite element  fatigue life  damage mechanism

友情链接LINKS