| 引用本文: | 郑传峰,赵大军,陈传景,郑湜,宋振丰,张婷.剪切效应下矿料接触面粘附及粘结强度测试[J].哈尔滨工业大学学报,2013,45(4):110.DOI:10.11918/j.issn.0367-6234.2013.04.020 |
| ZHENG Chuanfeng,ZHAO Dajun,CHEN Chuanjing,ZHENG Shi,SONG Zhenfeng,ZHANG Ting.The test of the adhesion and cohesion strength of mineral aggregate contact surface under shear effect[J].Journal of Harbin Institute of Technology,2013,45(4):110.DOI:10.11918/j.issn.0367-6234.2013.04.020 |
|
| 本文已被：浏览 2265次 下载 1877次 |
码上扫一扫！ |
|
|
| 剪切效应下矿料接触面粘附及粘结强度测试 |
|
郑传峰1, 赵大军1, 陈传景1, 郑湜2, 宋振丰3, 张婷1
|
|
(1.吉林大学 建设工程学院, 130026 长春; 2.吉林省交通科学研究所,130021 长春;3.深圳市政设计研究院, 518029 广东 深圳)
|
|
| 摘要: |
| 为了分析矿料接触面的细观强度特性,研究剪切效应下沥青与矿料表面粘附强度及沥青结合料自身粘结强度的定量测试技术．根据矿料接触面破坏方式及沥青与矿料表面剪切粘附强度、粘附失效区面积、沥青剪切粘结强度、粘结失效区面积与剪切破坏荷载的对应关系,确定沥青剪切粘结强度和沥青与矿料表面的剪切粘附强度,实现矿料接触面上粘附与粘结强度的定量测试．测试结果表明:沥青与矿料表面剪切粘附强度受试验温度及矿料接触面上油膜厚度影响较大,同时沥青品质也对其大小产生影响;沥青结合料剪切粘结强度与试验温度及沥青品质有较大相关性． |
| 关键词: 沥青稳定碎石 矿料接触面 剪切荷载效应 粘附强度 粘结强度 定量测试 |
| DOI：10.11918/j.issn.0367-6234.2013.04.020 |
| 分类号: |
| 基金项目:吉林省交通科技发展计划资助项目(2008-1-5);高校科学前沿及学科交叉研究计划资助项目(450060445202). |
|
| The test of the adhesion and cohesion strength of mineral aggregate contact surface under shear effect |
|
ZHENG Chuanfeng1, ZHAO Dajun1, CHEN Chuanjing1, ZHENG Shi2, SONG Zhenfeng3, ZHANG Ting1
|
|
(1. College of Construction Engineering, Jilin University, 130026 Changchun, China;2. Jilin Provincial Communication Scientific Research Institute, 130021 Changchun, China;3. Shenzhen Municipal Design ＆ Research Institute Co. Ltd., 518029 Shenzhen,Guangdong,China)
|
| Abstract: |
| To analyze the mesoscopic strength characters of aggregate contact surface, the quantitative testing technology of adhesion strength between bitumen and aggregates and the cohesion strength of bitumen binder itself under shear load were researched. According to the failure forms and the corresponding relationship of shear adhesion strength between aggregates and bitumen, adhesion failure area, shear cohesion strength of bitumen binder, cohesion failure area and shear failure load, the shear cohesion strength and shear adhesion strength can be determined, and the quantitative test of adhesion and cohesion strength of mineral aggregate contact surface can be realized. The test results show that the experimental temperature and oil film thickness of mineral aggregate contact surface have a big influence on shear adhesion strength, besides, the quality of bitumen also has an effect on it. The shear adhesion strength of bitumen binder has strong correlation with experimental temperature and the quality of bitumen. |
| Key words: bituminous stabilized macadam mineral aggregate contact surface shear load effect adhesion strength cohesion strength quantitative test
|
