Abstract
The production of nanoparticles by microsecond spark discharge evaporation in inert gas is studied systematically applying transmission electron microscopy, mobility analysis and BET surface area measurement. The method of spark discharge is of special interest, because it is continuous, clean, extremely flexible with respect to material, and scale-up is possible. The particle size distributions are narrow and the mean primary particle size can be controlled via the energy per spark. Separated, unagglomerated particles, 3–12 nm in size, or agglomerates can be obtained depending on the flow rate. The nanoparticulate mass produced is typically 5 g/kWh. A formula is given, which estimates the mass production rate via thermal conductivity, evaporation enthalpy and the boiling point of the material used. We showed that with gas purified at the spot, the method produced gold particles that were so clean that sintering of agglomerated particles occurred at room temperature. The influence of a number of parameters on the primary particle size and mass production rate was studied and qualitatively understood with a model of Lehtinen and Zachariah (J Aerosol Sci 33:357–368, 2002). Surprisingly high charging probabilities for one polarity were obtained. Spark generation is therefore of special interest for producing monodisperse aerosols or particles of uniform size via electrical mobility analysis. Qualitative observations in the present study include the phenomenon of material exchange between the electrodes by the spark, which opens the possibility of producing arbitrary mixtures of materials on a nanoscale. If spark generation of nanoparticles is performed in a standing or almost standing gas, an aerogel of a web-like structure forms between surfaces of different electrical potential.
Similar content being viewed by others
References
Barrufet MA, Patel MR, Eubank PT (1991) Novel computations of a moving boundary heat conduction problem applied to EDM technology. Comput Chem Eng 15(8):609–618
Borra J-P (2006) Nucleation and aerosol processing in atmospheric pressure electrical discharges: powders production, coatings and filtration. J Phys D: Appl Phys 39:R19–R54
Buffat P, Borel JP (1976) Size effect on the melting temperature of gold particles. Physical Review A 13:2287
Cundall CM, Craggs JD (1955) Electrode vapor jets in spark discharges. Spectrochimica Acta 7:149–164
El-Shall MS, Abdelsayed V, Pithawalla YB, Alsharaeh E (2003) Vapor phase growth and assembly of metallic, carbon, and silicon nanoparticle filaments. J Phys Chem B 107:2882–2886
Evans DE (2003) The generation and characterization of metallic and mixed element aerosols for human challenge studies. Aerosol Sci Technol 37:975–987
Evans DE, Harrison RM, Ayres JG (2003) The generation and characterization of elemental carbon aerosols for human challenge studies. J Aerosol Sci 34:1023–1041
Fuchs NA (1963) On the stationary charge distribution on aerosol particles in a bipolar ionic atmosphere. Pure Appl Geophys 56(1):185–193
Gleiter H, Weissmuller J, Wollersheim O, Wurschum R (2001) Nanocrystalline materials: a way to solids with tunable electronic structures and properties? Acta Mater 49:737–745
Gray EW, Pharney JR (1974) Electrode erosion by particle ejection in low-current arcs. J Appl Phys 45(2):667–671
Helsper C, Mölter W (1993) Investigation of a new aerosol generator for the production of carbon aggregate particles. Atmos Environ 27A(8):1271–1275
Hinds WC (1999) Aerosol technology, properties, behaviors, and measurements of airborne particles. Wiley
Horvath H, Gangl M (2003) A low-voltage spark generator for production of carbon particles. J Aerosol Sci 34:1581–1588
Kim J-T, Chang J-S (2005) Generation of metal oxide aerosol particles by a pulsed spark discharge technique. J Electrostatics 63:911–916
Kruis FE, Fissan H, Peled A (1998) Synthesis of nanoparticles in the gas phase for electronic, optical and magnetic application—a review. J Aerosol Sci 29(5/6):511–535
Lehtinen KEJ, Zachariah MR (2002) Energy accumulation in nanoparticle collision and coalescence processes. J Aerosol Sci 33:357–368
Lehtinen KEJ, Backman U, Jokiniemi JK, Kulmala M (2004) Three-body collisions as a particle formation mechanism in silver nanoparticle synthesis. J Colloid Interface Sci 274:526–530
Llewellyn Jones F (1950) Electrode erosion by spark discharges. Br J Appl Phys 1:60–65
Mäkelä JM, Aalto P, Gorbunov BZ, Korhonen P (1992) Size distributions from aerosol spark generator. J Aerosol Sci 23(Supplement 1):S233–S236
Meek JM, Craggs JD (1953) Electrical breakdown of gases. Oxford, Clarendon Press
Naidu MS, Kamaraju V (1995) High voltage engineering. Mcgraw Hill
Oh H, Ji J, Jung J, Kim S (2007) Synthesis of titania nanoparticles via spark discharge method using air as a carrier. Mater Sci Forum 544–545:143–146
Petr RA, Burkes TR (1980) Acoustic phenomena in erosion of spark-gap electrodes. Appl Phys Lett 36(7):536–537
Reinmann R, Akram M (1997) Temporal investigation of a fast spark discharge in chemically inert gases. J Phys D: Appl Phys 30:1125–113
Roth C, Ferron GA, Karg E, Lentner B, Schumann G, Takenaka S, Heyder J (2004) Generation of ultrafine particles by spark discharging. J Aerosol Sci Technol 38:228–235
Rouquerol F, Rouquerol J, Sing K (1999) Adsorption by powders and porous solids: principles, methodology and applications. San Diego Academic Press
Schleicher B, Friedlander S (1995) Fabrication of aerogel-like structures by agglomeration of aerosol particles in an electric field. J Colloid Interface Sci 180:15–21
Schwyn S, Garwin E, Schmidt-Ott A (1988) Aerosol generation by spark discharge. J Aerosol Sci 19(5):639–642
Sher E, Ben-Yaish J, Kravchik T (1992) On the birth of spark channels. Combust Flame 89:186–194
Soldera F, Lasagni A, Mucklich F, Kaiser T, Hrastnik K (2005) Determination of the cathode erosion and temperature for the phases of high voltage discharges using FEM simulations. Comput Mater Sci 13(5):444–453
Sugimoto T (2000) Fine particles synthesis, characterization, and mechanisms of growth. Marcel Dekker
Swihart MT (2003) Vapor-phase synthesis of nanoparticles. Curr Opin Colloid Interface Sci 8(1):127–133
Szenete RN, Munz RJ, Drouet MG (1994) Copper–niobium and copper–tungsten composites as plasma torch cathodes. J Phy D: Appl Phys 27:1443–1447
Ullmann M, Friedlander SK, Schmidt-Ott A (2002) Nanoparticles formation by laser ablation. J Nanopart Res 4:499–509
Va’vra J, Maly JA, Va’vra PM (1998) Soft X-ray production in spark discharges in hydrogen, nitrogen, air, argon and xenon gases. Nucl Instrum Methods Phys Res A 418:405–441
Vemury S, Pratsinis S (1995) Self preserving size distributions of agglomerates. J Aerosol Sci 26:175–185
Wiedensohler A, Fissan HJ (1991) Bipolar charge distributions of aerosol particles in high-purity argon and nitrogen. Aerosol Sci Technol 14:358–364
Acknowledgements
The authors would like to express their gratitude to Miren Echave Elustondo for carrying out particle size distribution measurements and Sander Brouwer for his assistance in BET measurements. The Project is partially funded by the Delft Center of Sustainable Energy (DISE).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tabrizi, N.S., Ullmann, M., Vons, V.A. et al. Generation of nanoparticles by spark discharge. J Nanopart Res 11, 315–332 (2009). https://doi.org/10.1007/s11051-008-9407-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11051-008-9407-y