DOI QR코드

DOI QR Code

Developing Techniques for Increasing Seismic Performance of Existing Electronic Panel on Access Floor

기존 배전반 이중바닥시스템의 내진보강 기술

  • 최은수 (홍익대학교 공과대학 토목공학과) ;
  • 김진호 (홍익대학교 공과대학 토목공학과) ;
  • 유완동 (홍익대학교 공과대학 토목공학과) ;
  • 이승용 (한국교통대학교 건설교통대학 토목공학과)
  • Received : 2012.03.20
  • Accepted : 2012.04.10
  • Published : 2012.04.30

Abstract

In this study, seismic reinforced access floor system are developed and estimated through the static load test for increasing seismic performance of electronic panels which are essential to the operation of various basic facilities such as electric power, signal and communication etc. A numerical method can be used for estimating seismic performance, but shaking table test is performed because it is very difficult to mimesis access floor system, fixed condition and members of electronic panel and etc. during earthquake at near real. As a result of this study, it secured horizontal safety, one of the problems, and seismic reinforced system have secured seismic performance of electronic panel such as preventing destroy. Thus, in case of applying seismic reinforced access floor system, damaged to the electric control panel by earthquake can be effectively prevent, so that it can be greatly contributed to the stable operation of domestic basic facilities without movement and power interruption of the electric panel.

이 연구에서는 전력, 통신, 신호 등 주요 기간설비의 운영에 필수적인 배전반의 이중바닥 시스템의 내진성능개선을 위하여 정적하중 실험을 통하여 내진보강 이중바닥시스템을 개발 및 평가하였다. 또한 내진성능평가를 위하여 수치해석적인 방법으로도 접근이 가능하지만, 지진 시 이중바닥시스템 및 배전반의 상호작용 및 구성부재 및 고정 조건 등을 실제에 가깝게 모사하기 매우 어렵기 때문에 진동대 시험을 수행하였다. 본 연구 결과를 통해 수평방향의 안정성도 확보하였고, 내진보강시스템이 배전반의 파손을 방지하는 등 배전반의 내진성능을 확보하여 주는 것으로 나타났다. 따라서 내진보강 이중바닥시스템을 적용하는 경우, 지진으로 인한 배전반의 파손을 효과적으로 방지하여 국내 주요 기간설비의 안정적 운영에 크게 기여할 수 있을 것으로 판단된다.

Keywords

Acknowledgement

Supported by : 기초전력연구원

References

  1. 조성국, 조양희, 박형기, 방기성 (2004) 송변전설비의 내진성능평가 기준 제안, 한국지진공학회.
  2. 장승필, 이성민 (2002) 주요시설물 내진설계기준의 재정비, 건설교통부.
  3. 장정범, 이종림, 황경민, 함경원 (2009) 무정전-무이설 방식의 전기판넬 내진보강시스템 시험연구, 지진공학회.
  4. 지식경제부 (2008) 지진발생 시 765kV 변전설비의 내진성능평가 및 안전조치기술 개발.
  5. 표민태, 김병직, 김도형, 이승용 (2010) 전기설비 내진성능 평가 및 설계기준 수립에 관한 연구, 대한전기학회.
  6. 한국전력공사 (2003) 송변전설비 내진설계 실무지침서.
  7. IEEE Power Engineering Society (1987) IEEE Recommended practice for seismic qualification of class 1E equipment fornuclear power generating stations, IEEE Std 344.
  8. IEEE Power Engineering Society (2005) IEEE Recommended practice for seismic design of substations, IEEE Std 693.