This data package is not the most recent revision of a series.  (View Newest Revision)

Data Package Summary    View Full Metadata

  • Water Quality Data (Grab Samples) from the Taylor Slough, Everglades National Park (FCE), from May 2001 to Present
  • Troxler, Tiffany; Project Collaborator; Southeast Environmental Research Center
    Childers, Daniel; Associate Director for Research| Professor; Global Institute of Sustainability| School of Sustainability
  • 2018-10-15
  • Troxler, T. and D. Childers. 2018. Water Quality Data (Grab Samples) from the Taylor Slough, Everglades National Park (FCE), from May 2001 to Present ver 8. Environmental Data Initiative. https://doi.org/10.6073/pasta/18c7168b940c5a7f91099edda43a6dcf (Accessed 2024-04-20).
  • Water quality samples are being collected using ISCO autosamplers at all wetland sites (that is, all sites except TS/Ph-9, 10, and 11). The autosamplers contain 24 1L bottles. Water is sampled by programming the autosamplers to take composite samples once every 3 days. These samples are a composite of four 250mL subsamples drawn every 18 hours (a sampling scheme that captures a dawn, noon, dusk, and midnight sample in every three day composite). The samples are collected every 3-4 weeks and analyzed for total phosphorus (TP), total nitrogen (TN), and salinity. When sites are visited to collect these samples, we also collect a grab sample that is immediately put on ice. A portion of these grab samples is filtered through a Whatman GF/F filter immediately upon return to the lab, and the filtered samples are analyzed for inorganic nutrients such as NO2-, NO3-, NH4+, SRP, and DOC. The unfiltered fraction of these grab samples is analyzed for TP, TN, and TOC. We use these montly grab samples to generate relationships between TP and SRP, and between TN and NO2- + NO3- + NH4+. Dissolved nutrients are measured using standard rapid flow analyzer (RFA) techniques. TP is analyzed with a modified Solorzano and Sharp (1980) technique. TN is measured with an Antec TN analyzer, TOC and DOC are quantified on a Shimadzu TOC Analyzer, and salinity is measured with a YSI conductivity meter. In addition to the regular water quality monitoring, we use the rain level actuators at all freshwater sites to trigger water sampling after rain events exceed a given threshold of duration and/or intensity. As currently programmed, when the threshold of = 2.5 cm of rain per hour is passed, the autosampler at that site collects a 500mL sample 30 minutes after the threshold has been reached. Rain event samples are collected, treated, and analyzed as all other water quality samples.

  • Geographic Coordinates
    • N: 25.327, S: 25.191, E: -80.525, W: -80.649
    • N: 25.761, S: 24.913, E: -80.49, W: -81.078
  • This information is released under the Creative Commons license - Attribution - CC BY (https://creativecommons.org/licenses/by/4.0/). The consumer of these data ("Data User" herein) is required to cite it appropriately in any publication that results from its use. The Data User should realize that these data may be actively used by others for ongoing research and that coordination may be necessary to prevent duplicate publication. The Data User is urged to contact the authors of these data if any questions about methodology or results occur. Where appropriate, the Data User is encouraged to consider collaboration or co-authorship with the authors. The Data User should realize that misinterpretation of data may occur if used out of context of the original study. While substantial efforts are made to ensure the accuracy of data and associated documentation, complete accuracy of data sets cannot be guaranteed. All data are made available "as is." The Data User should be aware, however, that data are updated periodically and it is the responsibility of the Data User to check for new versions of the data. The data authors and the repository where these data were obtained shall not be liable for damages resulting from any use or misinterpretation of the data. Thank you.
  • https://doi.org/10.6073/pasta/18c7168b940c5a7f91099edda43a6dcf
  • Analyze this data package using:           
EDI is proud to be affiliated with the following organizations: DataCite logo DataONE logo ESIP logo re3data logo