Extraction of Molybdenum (VI) and Vanadium (V) from Nitrate Solutions Using Coupling of Acid and Solvating Extractants (RESEARCH NOTE)

Document Type : Original Article

Authors

1 Materials and Nuclear Fuel Research School, Nuclear Science and Technology Research Institute

2 Department of Energy Engineering, Sharif University of Technology, P.O. Box 11365-8639, Tehran, Iran

3 Nuclear Fuel Cycle Research School, Nuclear Science and Technology Research Institute

Abstract

In this study, solvent extraction method has been utilized for separation of molybdenum and vanadium from nitrate solution by utilizing coupling of acid and solvating extractants (D2EHPA and TBP extractants). The outcomes demonstrated that synergistic solvent extraction improves stability of formatted complexes for transfer to the organic phase. The main parameters such as pH value, concentration of extractants, NH4OH concentration as the stripping agent and contact time were optimized at 0.4, 15% (v/v) D2EHPA, 10% (v/v) TBP, 2 M and 30 min, respectively. The maximum separation factor of 24.84 was obtained with a new synergistic mixture of D2EHPA and TBP diluted with kerosene. According to McCabe-Thiel diagram, more than 99% of the Mo (VI) was obtained in counter current procedure and three stage numbers using 15% (v/v) D2EHPA and its mixture with 10% (v/v) TBP in kerosene, initial aqueous pH value equal to 0.4 and A/O ratio of 4/1 at room temperature for 30 min. In addition, stripping of Mo (VI) reached 98.75% in three counter current stages using 2 M NH4OH as stripping agent and A/O ratio of 1/4  for 30 min.

Keywords


 1. Zeng, L. and Cheng, C.Y., "A literature review of the recovery of
molybdenum and vanadium from spent hydrodesulphurisation
catalysts: Part ii: Separation and purification", Hydrometallurgy, 
Vol. 98, No. 1-2, (2009), 10-20. 
2. Knyaz’kina, O., Kuznetsova, G., Travkin, V., Vol’dman, G. and
Glubokov, Y.M., "Extraction of molybdenum with bis (2, 4, 4trimethylpentyl)
phosphine acid (cyanex-272)", Russian Journal of Non-Ferrous Metals, Vol. 51, No. 6, (2010), 451-456.
3. Moskalyk, R. and Alfantazi, A., "Processing of vanadium: A
review", Minerals Engineering,  Vol. 16, No. 9, (2003), 793-805. 
4. Li, X., Deng, Z., Wei, C., Li, C., Li, M., Fan, G. and Huang, H.,
"Solvent extraction of vanadium from a stone coal acidic leach
solution using d2ehpa/tbp: Continuous testing",
Hydrometallurgy,  Vol. 154, (2015), 40-46. 
5. Nguyen, T.H. and Lee, M.S., "Separation of molybdenum (vi) and
tungsten (vi) from sulfate solutions by solvent extraction with lix
63 and pc 88a", Hydrometallurgy,  Vol. 155, (2015), 51-55. 
6. Alamdari, E.K., Haghshenas, D.F., Darvishi, D. and Sadrnezhaad,
S.K., "Improvement of the solvent extraction of rhenium from
molybdenite roasting dust leaching solution using counter-current
extraction by a mixer-settler extractor (technical note)",
International Journal of Engineering- Transaction B:
Applications,  Vol. 24, No. 2, (2011), 181-190. 
7. Nguyen, T.H. and Lee, M.S., "A review on the separation of
molybdenum, tungsten, and vanadium from leach liquors of
diverse resources by solvent extraction", Geosystem
Engineering,  Vol. 19, No. 5, (2016), 247-259. 
8. Fatmehsari, D.H., Darvishi, D., Etemadi, S., Hollagh, A.E.,
Alamdari, E.K. and Salardini, A., "Interaction between tbp and
d2ehpa during zn, cd, mn, cu, co and ni solvent extraction: A
thermodynamic and empirical approach", Hydrometallurgy,  Vol.
98, No. 1-2, (2009), 143-147. 
9. Zhu, Z., Zhang, W., Pranolo, Y. and Cheng, C.Y., "Separation and
recovery of copper, nickel, cobalt and zinc in chloride solutions
by synergistic solvent extraction", Hydrometallurgy,  Vol. 127,
(2012), 1-7. 
10. Yadollahi, A., Saberyan, K., Torab-Mostaedi, M., Charkhi, A.
and Pourjavid, M.R., "Solvent extraction separation of zirconium
and hafnium from nitric acid solutions using mixture of cyanex272
and
tbp",
Radiochimica
Acta,
Vol.
106,
No.
8,
(2018),
675684.
11. Sadrnezhaad, S.K. and Alamdari, E.K., "Eskandar keshavarz
alamdari1; d. F. Haghshenas2; d. Darvishi3; s.K. Sadrnezhaad4",
International Journal of Engineering-Transaction B:
Applications,  Vol. 17, No. 2, (2004), 191-200. 
12. Alamdari, E.K. and Sadrnezhaad, S., "Thermodynamics of
extraction of moo42− from aqueous sulfuric acid media with tbp
dissolved in kerosene", Hydrometallurgy,  Vol. 55, No. 3, (2000),
327-341. 
13. Hosseinzadeh, M. and Alizadeh, M., "Improvement of the solvent
extraction of rhenium from molybdenite roasting dust leaching
solution using counter-current extraction by a mixer-settler
extractor (technical note)", International Journal of
Engineering-Transaction A: Basics,  Vol. 27, No. 4, (2014),
651-658. 
14. Biswas, R., Wakihara, M. and Taniguchi, M., "Recovery of
vanadium and molybdenum from heavy oil desulphurization
waste catalyst", Hydrometallurgy,  Vol. 14, No. 2, (1985), 219230.
15. Mishra, D., Chaudhury, G.R., Kim, D.J. and Ahn, J.G., "Recovery
of metal values from spent petroleum catalyst using leachingsolvent
extraction technique", Hydrometallurgy, Vol. 101, No. 1-2, (2010), 35-40.
16. Zhu, Z., Tulpatowicz, K., Pranolo, Y. and Cheng, C.Y., "Solvent
extraction of molybdenum and vanadium from sulphate solutions
with cyphos il 101", Hydrometallurgy,  Vol. 154, (2015), 72-77. 
17. Wu, J., Wei, C., Li, X., Wang, S., Wang, M. and Li, C., "Selective
extraction of mo using cyanex-272 and tributyl phosphate from
low grade ni–mo ore leach liquor", Separation and Purification
Technology,  Vol. 99, (2012), 120-126. 
18. Li, X., Wei, C., Wu, J., Li, M., Deng, Z., Li, C. and Xu, H., "Coextraction
and selective stripping of vanadium (iv) and
molybdenum (vi) from sulphuric acid solution using 2-ethylhexyl
phosphonic acid mono-2-ethylhexyl ester", Separation and
Purification Technology,  Vol. 86, (2012), 64-69. 
19. El-Nadi, Y., Awwad, N. and Nayl, A., "A comparative study of
vanadium extraction by aliquat-336 from acidic and alkaline
media with application to spent catalyst", International Journal
of Mineral Processing,  Vol. 92, No. 3-4, (2009), 115-120.