1. Rubinstein, M., Moller, O. and Giuliano, A., "Inelastic
displacement-based design approach of r/c building structures in
seismic regions", Structural Engineering and Mechanics, Vol.
12, No. 6, (2001), 573-594.
2. Vafaee, M.H. and Saffari, H., "A modal shear-based pushover
procedure for estimating the seismic demands of tall building
structures", Soil Dynamics and Earthquake Engineering, Vol.
92, No., (2017), 95-108.
3. Priestley, M.N., "Myths and fallacies in earthquake engineeringconflicts
between design and reality", Bulletin of the New
Zealand National Society for Earthquake Engineering, Vol. 26,
No. 3, (1993), 329-341.
4. Gulkan, P. and Sozen, M.A., "Inelastic responses of reinforced
concrete structure to earthquake motions", in Journal
Proceedings. Vol. 71, (1974), 604-610.
5. Gulkan, P. and Sozen, M., "Substitute structure method for
seismic design in reinforced concrete", ACI Journal, Dec, (1974).
6. Calvi, G., Priestley, M. and Kowalsky, M., "Displacement based
seismic design of structures", in New Zealand Conference on
Earthquake Engineering, 2007, Citeseer. (2007).
7. Dimopoulos, A.I., Bazeos, N. and Beskos, D.E., "Seismic yield
displacements of plane moment resisting and x-braced steel
frames", Soil Dynamics and Earthquake Engineering, Vol. 41,
No., (2012), 128-140.
8. Amiri, G.G., Shalmaee, M.M. and Namiranian, P., "Evaluation of
a ddb design method for bridges isolated with triple pendulum
bearings", Structural Engineering and Mechanics, Vol. 59, No.
5, (2016), 803-820.
9. ANSI, A., "Aisc 360-10", Chicago, IL, (2010).
10. AISC, A., "Aisc 341-10, seismic provisions for structural steel
buildings", Chicago, IL: American Institute of Steel Construction,
(2010).
11. Engineers, A., "Minimum design loads for buildings and other
structures", ASCE 7, Vol. 10, (2010).
12. Habibulah, A., Etabs (extended three dimensional analysis of
building systems). 1995, User's Manual, Computers and
Structures Inc., Berkeley, California.
13. Eskandari, R. and Vafaei, D., "Effects of near-fault records
characteristics on seismic performance of eccentrically braced
frames", Structural Engineering and Mechanics, Vol. 56, No.
5, (2015), 855-870.
14. Kamgar, R. and Rahgozar, R., "Determination of critical
excitation in seismic analysis of structures", Earthquakes and
Structures, Vol. 9, No. 4, (2015), 875-891.
15. Kamgar, R., Samea, P. and Khatibinia, M., "Optimizing
parameters of tuned mass damper subjected to critical
earthquake", The Structural Design of Tall and Special
Buildings, Vol. 27, No. 7, (2018), e1460.
16. Venture, S.J., "Develop suites of time histories, project task: 5.4.
1, draft report", Sacramento, CA, USA, March, Vol. 21, (1997).
17. ATC, F., P695, quantification of building seismic performance
factors. 2009, Applied Technology Council, Redwood City, CA.
18. McKenna, F., Fenves, G., Filippou, F. and Scott, M., Open system
for earthquake engineering simulation (opensees). Berkeley:
Pacific earthquake engineering research center, university of
california; 2005. 2016.
19. Bosco, M., Marino, E.M. and Rossi, P.P., "Modelling of steel link
beams of short, intermediate or long length", Engineering
structures, Vol. 84, No., (2015), 406-418.
20. Pekelnicky, R., Engineers, S.D., Chris Poland, S. and Engineers,
N.D., "Asce 41-13: Seismic evaluation and retrofit rehabilitation
of existing buildings", Proceedings of the SEAOC, Vol., No.,
(2012).
21. Saffari, H., Damroodi, M. and Fakhraddini, A., "Assesment of
seismic performance of eccentrically braced frame with vertical
members", Asian Journal of Civil Engineering, Vol. 2, No. 18,
(2017), 255-269.
22. Cornell, C.A., Jalayer, F., Hamburger, R.O. and Foutch, D.A.,
"Probabilistic basis for 2000 sac federal emergency management
agency steel moment frame guidelines", Journal of Structural
Engineering, Vol. 128, No. 4, (2002), 526-533.
23. Corp, I., "Ibm spss statistics for windows, version 22.0", Armonk,
NY: IBM Corp, (2013).
24. Fajfar, P. and Gašperšič, P., "The N2 method for the seismic
damage analysis of rc buildings", Earthquake Engineering &
Structural Dynamics, Vol. 25, No. 1, (1996), 31-46.
25. Landi, L., Pollioa, B. and Diotallevi, P.P., "Effectiveness of
different standard and advanced pushover procedures for regular
and irregular rc frames", Structural Engineering and
Mechanics, Vol. 51, No. 3, (2014), 433-446.
26. Newmark, N.M., "Earthquake spectra and design", Earthquake
Eng. Research Institute, Berkeley, CA, (1982).