This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Numerical Lifetime Assessment of Engine Parts Submitted to Thermomechanical Fatigue, Application to Exhaust Manifold Design
Technical Paper
2000-01-0789
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2000 World Congress
Language:
English
Abstract
In this work a numerical method for the design of components submitted to severe cyclic thermomechanical loading is developed. This tool is based on a Finite Element (FE) analysis. In a first part the temperature distribution is obtained and used in the second part for the mechanical computation. The analyses use the description of the geometry of the part, a precise information of the thermal properties, an appropriate behavior of the material at low and high temperature and a good assessment of the boundary conditions (heat transfer coefficients, contact, …). This method is applied to asses the low cycle fatigue design of a diesel turbo-charged exhaust manifold in cast iron. These calculations, failure location and lifetime estimation, obtained on two versions of this component, are compared to experimental data. The results show a good agreement in terms of critical zones location and of lifetime comparison in both versions and permit thus to classify the versions.
Recommended Content
Authors
Citation
Lederer, G., Charkaluk, E., Verger, L., and Constantinescu, A., "Numerical Lifetime Assessment of Engine Parts Submitted to Thermomechanical Fatigue, Application to Exhaust Manifold Design," SAE Technical Paper 2000-01-0789, 2000, https://doi.org/10.4271/2000-01-0789.Also In
References
- AVL LIST GmbH FIRE Menu reference Graz 1996
- Taine J. Petit J.P. Transferts thermiques et mécanique des fluides anisothermes Dunod Paris 1989
- McAdams W.H Heat Transmission 3rd Mc Graw Hill 1954
- Hibbitt, Karlson & Soerensen Inc ABAQUS/Standard User's Manual 1998
- Anderson D. H. Bisaro D.R. Haan D.M. Olree M. SAE paper N° 980697 1998
- Simo J.C. Hughes T.J.R. Computationnal Inelasticity Springer Verlag 1998
- Charkaluk E. Verger L. Constantinescu A. Lederer G. Stolz C. Actes du 4ème Colloque de Calcul de Structure Teknea Giens 1999
- Coffin L. F ASME paper 53-A76 931 950 1953
- Manson S. NACA TN 2933 1953
- Halford, G. R. Manson, S. Thermal fatigue of materials and components ASTM STP 612 239 254 1976
- Smith, K.N. Watson P. Topper T. H. J. Mater. 5. 4 767 778 1970
- Skelton R. P. Mat. Sc. Tech. 7 427 439 1991
- Charkaluk E. Ecole Polythechnique Palaiseau, France 1999
- Charkaluk E. Constantinescu A. Bignonnet A. Dang Van K. Low cycle fatigue and elasto-plastic behavior of materials 119 130 Rie K.T. Portella R. D. Elsevier 1998