Study on the Tool Wear of Coated Carbide Tool in High Speed Milling Titanium Alloy

Shu Cai Yang; Yu Hua Zhang; Quan Wan; Jian Jun Chen; Chuang Feng

doi:10.4028/www.scientific.net/MSF.800-801.526

Paper Titles

Application and Technology Research in Deep-Hole Drilling System
p.506

Fabrication and Mechanical Properties of Homogenous and Graded Si₃N₄/(W, Ti)C Nano-Composite Ceramic Tool Materials
p.511

Design Method of Assembly Accuracy Repeatability of Heavy Duty Machine Tool
p.516

Control Strategy for Hydraulic Hybrid Servo Drive System of Heavy Load Robot
p.521

Study on the Tool Wear of Coated Carbide Tool in High Speed Milling Titanium Alloy
p.526

Research of an Open CNC System of Machine Tool for Finding and Repairing Surface Damage on KDP Crystal
p.531

Research on the Floating Motion Platform for Detecting Surface Defects in KDP Crystal
p.537

Numerical Modelling of Liquid Bearing Utilizing Traveling Waves by Using OpenFOAM
p.543

Experimental Study of Tool Wear during Quasi High Speed Turning Titanium Alloy with Large Cutting Depth
p.548

HomeMaterials Science ForumMaterials Science Forum Vols. 800-801Study on the Tool Wear of Coated Carbide Tool in...

Study on the Tool Wear of Coated Carbide Tool in High Speed Milling Titanium Alloy

Abstract:

The milling experiments were carried out using TiAlN and PCD coated carbide tools in high speed milling Ti6Al4V to compare and analyze tool wear and tool life of the two kinds of coating carbide tools. In addition, the effect of cooling and lubricating on tool wear is also studied. The results showed that fluid environment is not suitable for milling Ti6Al4V. PCD coating carbide tool can effectively increase the life of tool in high speed milling of Ti6Al4V.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Materials Science Forum (Volumes 800-801)

Pages:

526-530

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.800-801.526

Citation:

Cite this paper

Online since:

July 2014

Authors:

Shu Cai Yang*, Yu Hua Zhang, Quan Wan, Jian Jun Chen, Chuang Feng

Keywords:

Coated Cemented Carbide Tool, High-Speed Milling, Titanium Alloy, Tool Wear

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] Ezugwu E O. Key improvements in the machining of difficult to cut aerospace superalloys. International Journal of Machine Tools & Manufacture, 2005, 45: 1 353-1 367.

DOI: 10.1016/j.ijmachtools.2005.02.003

Google Scholar

[2] Wu Yi Chen, Yue Feng Yuan. Research Development of Cutting Technology for Titanium Alloy [J]．Aeronautical Manufacturing Technology，2010.

Google Scholar

[3] Guang Ming Zheng，Jun Zhao，Xiao Qin Wang. Study on fractal characterization of cutting force in dry turning titanium alloy with carbide tool [J]. Tool Engineering，2010，44(1)：23-25.

Google Scholar

[4] Han Bing Luo．Experimental Investigation on tool failure and machined surface quality for high speed milling titanium alloy. [D]．Jinan：ShangDong University ，2011：36-42.

Google Scholar

[5] Yang Qiao，Xing Ai，Jun Zhao，Zhan Qiang Liu．The failure mechanism of PM superalloys with coated carbide tool. [J]．Journal of Beijing University of Technology，2011(01).

Google Scholar

[6] Tao Meng, Jiang Feng LI, Jing Sun. Experimental study on tool wear in high speed milling of Ti6Al4V [J]. Journal of WuHang University of Technology. 2010(06).

Google Scholar

[7] E.O. Ezugwu, R.B. DaSilva, J. Bonney, A. R. Machado. Evaluation of the Performance of CBN Tools When Turning Ti6Al4V Alloy with High Pressure Coolant Supplies [J]. International Journal of Machine Tools and Manufacture, 2005, 45(9), 1009-1014.

DOI: 10.1016/j.ijmachtools.2004.11.027

Google Scholar

[8] Nurul Amin A K M, Ismail A F, Nor Khairusshima M K. Effectiveness of uncoated WC–Co and PCD inserts in end milling of titanium alloy Ti-6Al-4V. Journal of Materials Processing Technology, 2007, 192-193: 147-158.

DOI: 10.1016/j.jmatprotec.2007.04.095

Google Scholar