[1]
Akay, A. Acoustics of friction. J. Acoust. Soc. Am., Vol. 111 (2002), pp.1525-1548.
Google Scholar
[2]
North, N. R. Disc Brake squeal. Proc. IMechE, C38/76 (1976), pp.169-176.
Google Scholar
[3]
Crolla, D. A. and Lang, A. M. Brake noise and vibration the state of the art. In Vehicle Technology, No. 18 in Tribology Series, ed. Dawson, D., Taylor, C. M. and Godet, M. (Pro. Eng. Pub., 1991), pp.165-174.
DOI: 10.1016/s0167-8922(08)70132-9
Google Scholar
[4]
Nishiwaki, M. R Review of Study on Brake Squeal. Jap. Soc. Auto. Eng. Rev., Vol. 11 (1990), pp.48-54.
Google Scholar
[5]
Yang, S. and Gibson, R. F. Brake vibration and noise: review, comments and proposals. Int. J. Mater. Product Tech., Vol. 12 (1997), pp.496-513.
Google Scholar
[6]
Kinkaid, N. M., O'Reilly, O M and Papadopoulos, P. Automotive disc brake squeal: a review. J. Sound Vib., to be published in (2003).
Google Scholar
[7]
Lee, Y. S., Brooks, P. C., Barton, D. and C., Crolla, D. A. A study of disc brake squeal propensity using parametric finite element model. In IMechE Conf. Trans., European Conf. On Noise and Vibration, 12-13 May 1998, pp.191-201.
Google Scholar
[8]
Nack, W. V. Brake squeal analysis by the finite element method. Int. J. Vehicle Des., Vol. 23 (2000), pp.263-275.
Google Scholar
[9]
Ouyang, H. and Mottershead, J. E. A moving-load model for disc-brake stability analysis. Trans. ASME, J. Vib. Acoust., Vol. 125 (2003), pp.53-58.
DOI: 10.1115/1.1521954
Google Scholar
[10]
Hu, Y. and Nagy, L. I. Brake squeal analysis using nonlinear transient finite element method. SAE Paper 971610, (1997).
DOI: 10.4271/971510
Google Scholar
[11]
Ouyang, H., Mottershead, J. E., Brookfield, D. J., James, S. and Cartmell, M. P. A methodology for the determination of dynamic instabilities in a car disc brake. Int. J. Vehicle Design, Vol. 23 (2000), pp.241-262.
DOI: 10.1504/ijvd.2000.001894
Google Scholar
[12]
Dunlap, K. B, Riehle, M. A. and Longhouse R. E. An investigative overview of automotive disc brake noise. SAE Paper 1999-01-0142, (1992).
DOI: 10.4271/1999-01-0142
Google Scholar
[13]
Hulten, J. O. and Flint, J. An assumed modes approach to disc brake squeal analysis. SAE Paper 1999-01-1335, (1999).
DOI: 10.4271/1999-01-1335
Google Scholar
[14]
Fryba, L. Vibration of Solids and Structures under Moving Loads. Noordhoff, Groningen, (1972).
Google Scholar
[15]
Mottershead, J. E. Vibration and friction-induced instability in discs. Shock Vib. Dig., Vol 30 (1998), pp.14-31.
Google Scholar
[16]
Yuan, Y. A study of the effects of negative friction-speed slope on brake squeal. Proc. 1995 ASME Des. Eng. Conf., Boston, Vol. 3, Part A, pp.1135-1162.
Google Scholar
[17]
James, S., Brookfield, D., Ouyang, H., and Motterhsead, J. E. Disc brake squeal - an experimental approach. Proc. 5th Int Conf on Modern Practice in Stress and Vibration Analysis, 911 Sept 2003, University of Glasgow, Scotland. Appendix C, K, M damping, mass and stiffness matrices of the stationary components. f force vector for the finite element model of the stationary components. j number of contact nodes at the disc/pads interface. k, l (m, n) number of nodal circles and number of nodal diameters in the mode of the bolted disc. p force vector consisting of all ip . klq modal co-ordinate for k nodal circles and l nodal diameters for the disc. q modal co-ordinate vectors for the disc and the stationary components. r , θ, z radial, circumferential and axial co-ordinates of the cylindrical co-ordinate system. t time. wvu , displacements in the zr and, θ directions respectively. ppp , wvu wvu , displacement vectors of the pad nodes at the disc/pads interface. x displacement vector corresponding to f. ox displacement vector for the nodes other than the contact nodes at the disc/pads interface. ν Poisson's ratio of the disc. ξ damping coefficient of the disc. klω undamped natural frequency corresponding to klq . ω the imaginary part of a system eigenvalue (frequency).
Google Scholar
