[1]
Harris, I. D., & Director, A. M. C. (2011). Development and Implementation of Metals Additive Manufacturing. DOT International, New Orleans.
Google Scholar
[2]
Zlenko M., Popovich A.A., Mutylina I.N. Additive manufacturing in mechanical engineering (in Russian), Saint-Petersburg: Polytechnical University press, 2013, pp.3-11.
Google Scholar
[3]
Frazier, W. E. (2014). Metal additive manufacturing: A review. Journal of Materials Engineering and Performance, 23(6), 1917-(1928).
Google Scholar
[4]
Chlebus, E., Kuźnicka, B., Kurzynowski, T., & Dybała, B. (2011). Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser melting. Materials Characterization, 62(5), 488-495.
DOI: 10.1016/j.matchar.2011.03.006
Google Scholar
[5]
Attar, H., Calin, M., Zhang, L. C., Scudino, S., & Eckert, J. (2014). Manufacture by selective laser melting and mechanical behavior of commercially pure titanium. Materials Science and Engineering: A, 593, 170-177.
DOI: 10.1016/j.msea.2013.11.038
Google Scholar
[6]
Vrancken, B., Thijs, L., Kruth, J. P., & Van Humbeeck, J. (2012). Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties. Journal of Alloys and Compounds, 541, 177-185.
DOI: 10.1016/j.jallcom.2012.07.022
Google Scholar
[7]
Vilaro, T., Colin, C., & Bartout, J. D. (2011). As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting. Metallurgical and Materials Transactions A, 42(10), 3190-3199.
DOI: 10.1007/s11661-011-0731-y
Google Scholar
[8]
Facchini, L., Magalini, E., Robotti, P., Molinari, A., Höges, S., & Wissenbach, K. (2010). Ductility of a Ti-6Al-4V alloy produced by selective laser melting of prealloyed powders. Rapid Prototyping Journal, 16(6), 450-459.
DOI: 10.1108/13552541011083371
Google Scholar
[9]
Rafi, H. K., Karthik, N. V., Gong, H., Starr, T. L., & Stucker, B. E. (2013).
Google Scholar
[10]
ASTM F1580 – 12 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants.
DOI: 10.1520/f1580-95
Google Scholar
[11]
Sufiiarov V. Sh. Analysis and simulation of the process of dendritic inhomogeneity formation in steel towards its reduction (in Russian). Ph.D. thesis in Engineering Science, Saint-Petersburg: SPbSTU, 2013, pp.103-106.
Google Scholar
[12]
Srivastava, A. K. (2000). On cooling rates, interface velocities and particle sizes in spray atomization. Journal of materials science letters, 19(14), 1217-1219.
Google Scholar
[13]
ASTM F2924 - 14 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion.
DOI: 10.1520/f2924-12
Google Scholar
[14]
Information on http: /www. bibusmetals. com. ua/fileadmin/materials/PDF/ catalogs_new_2013/titan/Titan_Grade_5_RU_EN. pdf.
Google Scholar