[1]
Ultramid® (PA), Hauptbroschüre, Ultramid® für den Automobilbau, BASF-The Chemical Company.
Google Scholar
[2]
Behrens, B. -A., Bouguecha, A., Eckold, C. -P., Peshekhodov, I., 2012. A new clinching process especially for thin metal sheets and foils. The 15th international ESAFORM Conference on Material Forming, University of Erlangen, (2012).
DOI: 10.4028/www.scientific.net/kem.504-506.783
Google Scholar
[3]
Behrens, B. -A., Hübner, S. Eckold, C. -P., Schnapp, J. D., 2008. Reducing damage of coating caused by clinching of aluminum sheet metal by process optimization. The 9th international conference on technology of plasticity, (2008).
Google Scholar
[4]
Beyer, U., 2012. Multi-Material-Fügen mittels Flach-Clinch-Technologie, Dissertation, Band 6, Technische Universität Chemnitz, (2012).
Google Scholar
[5]
DVS - Deutscher Verband für Schweißen und verwandte Verfahren e.V. / EFB - Europäische Forschungsgesellschaft für Blechverarbeitung e.V.: Merkblatt DVS/EFB 3420-1: Clinchen- Grundlagen / Clinching-basics, unpublished edition, Düsseldorf, (2011).
DOI: 10.1002/mawe.19780090512
Google Scholar
[6]
Zohdi, T., and WRIGGERS, P., (2001a), Aspects of the computational testing of properties of microheterogeneous material samples, Inter. J. Meth. Eng., vol. 50, p.2573–2599.
DOI: 10.1002/nme.146
Google Scholar
[7]
Gusev, A.A., Hine, P.J., and Ward, I.M. (2000), Fiber packing and elasticity properties of a transversely random unidirectional glass/epoxy composite. Composites Science and Technology, vol 60, p.535–4.
DOI: 10.1016/s0266-3538(99)00152-9
Google Scholar
[8]
Scheider, I. Chen, Y. Hinz, A. Huber, N. Mosler, J. Size effects in short fibre reinforced composites, Engineering Fracture Mechanics 100 (2013) 17–27.
DOI: 10.1016/j.engfracmech.2012.05.005
Google Scholar
[9]
Behrens, B. -A., Hübner S., Götze T., Grbic N., 2013. Clinchen eines kurzfaserverstärkten Thermoplasten mit einem Aluminiumblechwerkstoff, 20. Sächsische Fachtagung Umformtechnik, Dresden, 2013, pp.53-62.
Google Scholar
[10]
Sigvant, M., Mattiason, K., Vegter, H., Thilderkvist, P., 2009. A viscous pressure bulge test for the determination of a plastic hardening curve and equibiaxial material data, International Journal of Material Forming 2, 2009, pp.235-242.
DOI: 10.1007/s12289-009-0407-y
Google Scholar
[11]
Keller, S.P., 1961. Plastic Instability and Fracture in Sheets Strechedover Rigid Punches, Ph.D. Thesis, MIT, Boston, USA, (1961).
Google Scholar
[12]
Keller, S., Hotz, H., Friebe, H., Klein, M., 2009. Experimental procedure in yield curve determination using the bulge test combined with optical measurement, in: Proceedings of the IDDRG Conference, (2009).
Google Scholar
[13]
Vucetic, M., Bouguecha, A., Peshekhodov, I., Götze, T., Huinink, T., Friebe, H., Moeller, T., Behrens, B. -A., 2011. Numerical validation of the analytical biaxial true stress-true strain curves from the bulge test, in: Proceedings of the Numisheet Conference, (2011).
DOI: 10.1063/1.3623599
Google Scholar
[14]
Junginger, M., 2002. Charakterisierung und Modellierung unverstärkter thermoplastischer Kunststoffe zur numerischen Simulation von Crashvorgängen, Dissertation, EMI-Bericht 15/02, Universität der Bundeswehr München. Fakultät für Bauingenieur- und Vermessungswesen (2002).
Google Scholar
[15]
Schöpfer, J. 2011. Spritzgussbauteile aus kurzfaserverstärkten Kunststoffen: Methoden der Charakterisierung und Modellierung zur nichtlinearen Simulation von statischen und chrashrelevanten Lastfällen, Dissertation, Technische Universität Kaiserslautern, (2011).
Google Scholar
[16]
Becker, F., Kraatz, A., Moneke, M., 2007. Determination of the mechanical properties of oriented short fiber reinforced thermoplastics under different stress states, 6. LS-Dyna Anwenderforum, Frankenthal, (2007).
Google Scholar
[17]
Arcan, M., 1973. A new method for the analysis of mechanical properties of composite materials, 3rd international congress on experimental mechanics, Los Angeles, USA, (1973).
Google Scholar
[18]
Kolling, S., Haufe, A., Feucht, M., Du Bois, P.A., 2005. SAMP-1: A Semi-Analytical Model for the Simulation of Polymers, 4. LsDyna Anwenderforum, Bamberg, (2005).
Google Scholar
[19]
Vogler, M., Kolling, S., Haufe, A., 2007. A constitutive model for plastics with piecewise linear yieldsurface and damage. In 6. LS-DYNA Forum (S. B-II-13–30).
Google Scholar
[20]
Vogler, M., 2011. Viscplastische Stoffgesetze für Thermoplaste in LS-DYN: Theorie und Aspekte der Programmierung. New York: VDM Verlag.
Google Scholar
[21]
LS-DYNA®, Keyword User's Manual, Volume I, Livermore Software Technology Corporation (LSTC), (2009).
Google Scholar
[22]
Banabic D., 2010, Sheet Metal Forming Processes, Constitutive Modelling and Numerical Simulation, Springer Verlag, (2010).
DOI: 10.1007/978-3-540-88113-1_4
Google Scholar
[23]
Vogler, M., Andrade, F., Schöpfer, J., Kolling, S. & Rolfes, R. " A novel transversely-isotropic 3D elastic-viscoplastic constitutive law for modeling fiber matrix composite [Conference Proceedings, Download: www. dynalook. com/]. In 8th European LS-DYNA Users Conference. Strasbourg, France, 23 - 24 May, (2011).
Google Scholar
[24]
Vogler, M., Rolfes, R. and Camanho, P.P. Modeling the inelastic deformation and fracture of polymer composites – part I: plasticity model., Mechanics of Materials, Volume 59, pp.50-64, April (2013).
DOI: 10.1016/j.mechmat.2012.12.002
Google Scholar
[25]
Lambi, M., 2011. Predicting performance of thermoplastic composites taking into account the fiber orientation effects utilizing ULTRASIMTM technology, BASF Engineering plastics, SPE ACCE conference, 2011, Michigan.
Google Scholar
[26]
Günzel S., 2013. Analyse der Schädigungsprozesse in einem kurzfaserverstärkten Polyamid unter mechanischer Belastung mittels Röntgenrefraktometrie, Bruchmechanik und Fraktografie, BAM-Dissertationsreihe, Band 97, Berlin, (2013).
Google Scholar
[27]
Reithofer P., Fritz M., Wimmer T., 2008. Kurzfaserverstärkte Kunststoffbauteile Einfluss der prozessbedingten Faserorientierung auf die Strukturmechanik, 7. LS-DYNA Anwenderforum, Bamberg, (2008).
Google Scholar