Analysis of Crown Control Characteristics for SmartCrown Work Roll

Hong Bo Li; Jie Zhang; Jian Guo Cao; Li Li Meng

doi:10.4028/www.scientific.net/AMR.156-157.1261

Paper Titles

Parametric Design on Belt Conveyor Drums Based on VBA
p.1243

The Characteristics and Application of Water Quenched Slag Particles (WQSP) as Filter Media
p.1247

The Effect of Cable Material Characteristics on Suspendome
p.1251

Dynamic Optimization of Lift-Arm Luffing Mechanism of Rotary Drilling Rig
p.1256

Analysis of Crown Control Characteristics for SmartCrown Work Roll
p.1261

Discussing the Green Design for Belt Conveyor
p.1266

Calculation Methods for Equivalent Fatigue Stress Amplitude Based on Corten-Dolan Accumulative Damage Rule
p.1271

Optimization Design of Finger Seal Performances Based on Game Theory
p.1275

System Development of the Service Robot
p.1281

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 156-157Analysis of Crown Control Characteristics for...

Analysis of Crown Control Characteristics for SmartCrown Work Roll

Abstract:

SmartCrown work roll contour has been brought in China for several years, but the research of crown control characteristics of SmartCrown work roll is lacking, especially the relationship and difference between SmartCrown and CVC work rolls. The paper researched the principle and design method of SmartCrown work roll contour first, and then the relation and difference between the SmartCrown and CVC work roll contours were pointed out, the crown control ability of different strip width was discussed too. From the analysis and research, it can be concluded that the contour angle of SmartCrown work roll contour is the most key factor for its crown control characteristics.

You might also be interested in these eBooks

Advanced Manufacturing Technology, ICAMMP 2010

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 156-157)

Pages:

1261-1265

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.156-157.1261

Citation:

Cite this paper

Online since:

October 2010

Authors:

Hong Bo Li, Jie Zhang, Jian Guo Cao, Li Li Meng

Keywords:

Contour Angle, Crown, SmartCrown, Work Roll

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Cao J G, Zhang J, Chen X L, et al. Iron and Steel, Vol. 40 (2005), n. 6, p.40.

Google Scholar

[2] Zhang J, Chen X L, Xu Y H, et al. Journal of University of Science and Technology Beijing, Vol. 16 (1994), n. S1, p.98.

Google Scholar

[3] Cao J G, Zhang J, Chen X L, et al. Journal of University of Science and Technology Beijing, Vol. 25 (2003), n. S1, p.1.

Google Scholar

[4] Yang G H, Cao J G, Zhang J, et al. Journal of University of Science and Technology Beijing, Vol. 28 (2006), n. 7, p.669.

Google Scholar

[5] Yang G H, Cao J G, Zhang J, et al. Iron and Steel, Vol. 41 (2006), n. 9, p.56.

Google Scholar

[6] J.G. Tellman, G. Steden, F. Lingen. Shape control with CVC in a cold strip mill-development and operational results. Proc. of 5th Int Steel Rolling Conf. UK, (1990), p.260.

Google Scholar

[7] Cheng L, A. Kiet Tieu, Jiang Z Y. Journal of material processing technology, 125/126, (2002), p.645.

Google Scholar