Computational Analysis of Biaxial Bending in Reinforced Concrete Columns

Krzysztof Kamiński; Katarzyna Budek

doi:10.4028/www.scientific.net/AMM.797.45

Paper Titles

The Comparison of Methods of Assessing the Reliability of the Steel Frame
p.11

Application of FEM Mesh Generation Algorithm for Digital Processing of Handmade Sketches
p.19

Monte Carlo Simulation of the Torsional Strength due to Concrete Compression of Reinforced Concrete Element
p.27

Probabilistic Analysis of Shear Resistance due to Concrete Tension
p.35

Computational Analysis of Biaxial Bending in Reinforced Concrete Columns
p.45

Research on the Phenomenon of Relaxation of Compressed Concrete Elements
p.53

Generating Interaction Curve Graph Based on the Rotation Angle of Strain Diagram, According to EN 1992
p.61

Designing Compressed Reinforcement Cross-Sections by Curvature and Nominal Stiffness Methods
p.69

Research on Compresive Strength and Strain of Expansive Concrete
p.79

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 797Computational Analysis of Biaxial Bending in...

Computational Analysis of Biaxial Bending in Reinforced Concrete Columns

Abstract:

The aim of this paper is to provide a solution for easy calculations of reinforced concrete with biaxial bending cross-section. The paper presents in an orderly manner basic definitions related to the discussed topics, to the extent necessary to understand the discussed issues. As a result of the computational analysis dozens of sections with biaxial bending, there was developed a table and a chart containing the correction factor for bending moments, allowing to obtain the correct bearing capacity of cross-section, subjected to biaxial bending. This work presents proposition for a new, own calculation method of such cross-section. Calculations were made according to PN-EN 1992-1-1:2008, Eurocode 2, Design of concrete structures. Part 1-1: General rules and rules for buildings, using algorithms based on simplified methods. According to carried out calculations, cross-section dimensioning compressed with biaxial eccentricities separately on each side and values of bending moments should be increased to maintain cross-section's bearing capacity. The coefficient K scaling moments was determined as a function of eccentricity e_y. With the increase of eccentricity, the coefficient K decreases.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 797)

Pages:

45-52

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.797.45

Citation:

Cite this paper

Online since:

November 2015

Authors:

Krzysztof Kamiński*, Katarzyna Budek

Keywords:

Biaxial Bending, Dimensioning, Eccentric Compression, Eurocode 2, Reinforced Concrete Columns

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] L. M. Gil- Martin, E. Hernandez- Montes, M. Aschheim, Optimal reinforcement of RC columns for biaxial bending. Materials and Structures. 43/2010, pp.1247-1248.

DOI: 10.1617/s11527-009-9576-x

Google Scholar

[2] E. Kamińska, Items bearing capacity of bending compression and tension. Concrete structures, reinforced concrete and compressed. Scientific comment to PN-B-03264: 2002 norm (in Polish), ITB, Warsaw (2005).

Google Scholar

[3] M. Knauff, Calculation of reinforced concrete structures according to Eurocode 2 (in Polish), PWN, Warsaw (2012).

Google Scholar

[4] B. A. Lejano, Investigation of biaxial bending of reinforced concrete columns through fiber method modeling, Journal of Research in Science, Computing, and Engineering 4: 3/(2007).

DOI: 10.3860/jrsce.v4i3.634

Google Scholar

[5] B. C. Punmia, A. K. Jain, A. K. Jain, Limit state design of reinforced concrete, Laxmi Publications, New Delhi.

Google Scholar

[6] EN 1992-1-1: 2008, Eurocode 2, Design of concrete structures. Part 1-1: General rules and rules for buildings.

Google Scholar