Abstract
In this article, a new technology is described to manufacture open cell thermoplastic foamed sheets with the aid of surface-quenching phenomenon during an extrusion process. As the gas laden polymer extrudate exits the slit die, its surface is rapidly quenched which results in freezing of cells on the surface, while the cells at the core continue to grow and leads to development of open-cellular microstructure at the core. Influence of chill roll temperature was found to be extremely significant in developing porous morphological attributes. Subsequently, synergistic effect of physical blowing agent (N2) content and chill roll temperature was examined for their expansion ratio and foam thickness. Fascinatingly, with reduced chill roll temperatures open-cell microstructure and high expansion ratio was obtained although its thickness was observed to decrease. Further, influence of chill roll rotating speed on foam microstructure and expansion ratio was studied. Lower chill roll rotational speed resulted in development of open-cellular microstructure; while at higher speeds, closed cell morphology was obtained. The results coherently demonstrate that by controlling the chill roll temperatures; open-cellular microstructure can be developed in sheet extrusion foaming process.
References
BaldwinD. F., ChaS. W., ParkC. B. and SuhN. P., U.S. Patent 5158986 (1992)Search in Google Scholar
BaekB. K., ShinJ. W., JungJ. Y., HongS. M., NamG. J., HanH. and KooC. M., ”Continuous Supercritical Decrosslinking Extrusion Process for Recycling of Crosslinked Polyethylene Waste”, J. Appl. Polym. Sci., 132 (2014) 10.1002/app.41442Search in Google Scholar
CosteuxS., “CO2-Blown Nanocellular Foams”, J. Appl. Polym. Sci., 131, 41293 (2014) 10.1002/app.41293Search in Google Scholar
DespoisJ.-F., MortensenA., “Permeability of Open-Pore Microcellular Materials”, Acta materialia, 53, 1381–1388 (2005) 10.1016/j.actamat.2004.11.031Search in Google Scholar
GandhiA., AsijaN., GaurK. K., RizviS. J. A., TiwariV. and BhatnagarN., “Ultrasound Assisted Cyclic Solid-State Foaming for Fabricating Ultra-Low Density Porous Acrylonitrile–Butadiene–Styrene Foams”, Mat. Lett., 94, 76–7810.1016/j.matlet.2012.12.024Search in Google Scholar
GandhiA., AsijaN., ChauhanH. and BhatnagarN., “Ultrasound-Induced Nucleation in Microcellular Polymers”, J. Appl. Polym. Sci., 131 (2014) 10.1002/app.40742Search in Google Scholar
GandhiA., BhatnagarN., “Significance of Ultrasonic Cavitation Field Distribution in Microcellular Foaming of Polymers”, Cell. Polym., 34, 1–14 (2015)10.1177/026248931503400101Search in Google Scholar
HanX., KoellingK. W., TomaskoK. W. and LeeL. J., “Effect of Die Temperature on the Morphology of Microcellular Foams”, Polym. Eng. Sci., 43, 1206–1220 (2003) 10.1002/pen.10102Search in Google Scholar
JahaniD., AmeliA., SanieiM., DingW., ParkC. B. and NaguibH. E., “Characterization of the Structure, Acoustic Property, Thermal Conductivity, and Mechanical Property of Highly Expanded Open-Cell Polycarbonate Foams”, Macromol. Mater. Eng., 300, 48–56 (2014) 10.1002/mame.201400125Search in Google Scholar
JiangW., ShiJ., LiW. and SunK., “Morphology, Wettability, and Mechanical Properties of Polycaprolactone/Hydroxyapatite Composite Scaffolds with Interconnected Pore Structures Fabricated by a Mini-Deposition System”, Polym. Eng. Sci., 52, 2396–2402 (2012) 10.1002/pen.23193Search in Google Scholar
KohlhoffD., OhshimaM., “Open Cell Microcellular Foams of Polylactic Acid (PLA)-Based Blends with Semi-Interpenetrating Polymer Networks”, Macromol. Mater. Eng., 296, 770–777 (2011) 10.1002/mame.201000371Search in Google Scholar
LeeP. C., NaguibH. E., ParkC. B. and WangJ., “Increase of Open-Cell Content by Plasticizing Soft Regions with Secondary Blowing Agent”, Polym. Eng. Sci., 45, 1445–1451 (2005) 10.1002/pen.20422Search in Google Scholar
LeeP. C., WangJ. and ParkC. B., “Extrusion of Microcellular Open-Cell LDPE-Based Sheet Foams”, J. Appl. Polym. Sci., 102, 3376–3384 (2006) 10.1002/app.24868Search in Google Scholar
LeeP. C., WangJ. and ParkC. B., “Extruded Open-Cell Foams Using Two Semicrystalline Polymers with Different Crystallization Temperatures”, Ind. Eng. Chem. Res., 45, 175–181 (2006) 10.1021/ie050498jSearch in Google Scholar
LeeP. C., LiG., LeeJ. W. S., ParkC. B., “Improvement of Cell Opening by Maintaining a High Temperature Difference in the Surface and Core of a Foam Extrudate”, J. Cell. Plast., 43, 431–444 (2007) 10.1177/0021955X07079150Search in Google Scholar
LepineO., BirotM. and DeleuzeH., “Elaboration of Open-Cell Microcellular Nanocomposites”, J. Polym. Sci. A Polym. Chem., 45, 4193–4203 (2007) 10.1002/pola.22160Search in Google Scholar
MatuanaL. M., DiazC. A., “Study of Cell Nucleation in Microcellular Poly(lactic acid) Foamed with Supercritical CO2 through a Continuous-Extrusion Process”, Ind. Eng. Chem. Res., 49, 2186–2193 (2010) 10.1021/ie9011694Search in Google Scholar
MaurerE., HussainS. and MukhopadhyayS. M., “Cell Growth in a Porous Microcellular Structure: Influence of Surface Modification and Nanostructures”, Nanosci. Nanotechnol. Lett., 3, 110–113 (2011) 10.1166/nnl.2011.1128Search in Google Scholar
ParkC. B., SuhN. P., “Filamentary Extrusion of Microcellular Polymers Using a Rapid Decompressive Element”, Polym. Eng. Sci., 36, 34–48 (1996) 10.1002/pen.10382Search in Google Scholar
RodeheaverB. A., ColtonJ. S., “Open-Celled Microcellular Thermoplastic Foam”, Polym. Eng. Sci., 41, 380–400 (2001) 10.1002/pen.10736Search in Google Scholar
SauceauM., FagesJ., CommonA., NikitineC. and RodierE., “New Challenges in Polymer Foaming: A Review of Extrusion Processes Assisted by Supercritical Carbon Dioxide”, Prog. Polym. Sci., 36, 749–766 (2011) 10.1016/j.progpolymsci.2010.12.004Search in Google Scholar
TsimpliarakiA., TsivintzelisI., MarrasS. I., ZuburtikudisI. and PanayiotouC., “The Effect of Surface Chemistry and Nanoclay Loading on the Microcellular Structure of Porous Poly(d, l lactic acid) Nanocomposites”, J. Supercrit. Fluids, 57, 278–287 (2011) 10.1016/j.supflu.2011.03.010Search in Google Scholar
WolffF., MünstedtH., “Continuous Direct Melt Foaming of a Preceramic Polymer Using Carbon Dioxide: Extrusion Device and First Results”, J. Mater. Sci., 46, 6162–6167 (2011) 10.1007/s10853-011-5679-1Search in Google Scholar
© 2015, Carl Hanser Verlag, Munich
