Abstract
The motion of the machined part over the tool’s working surface is considered in raster finishing with frictional kinematic linkage. The relative trajectories of the part and tool are analyzed. In forward movement of the lap, rigid kinematic linkage in the part–tool contact is recommended.
Similar content being viewed by others
References
Orlov, P.N., Tekhnologicheskoe obespechenie kachestva detalei metodami dovodki (Technological Maintenance of the Quality of Parts by Polishing Methods), Moscow: Mashinostroenie, 1988.
Sanchez, L.E.A., Jun, N.Z.X., and Fiocchi, A.A., Surface finishing of flat pieces when submitted to lapping kinematics on abrasive disc dressed under several overlap factors, Precision Eng., 2011, vol. 35, no. 2, pp. 355–363.
Khanov, A.M., Muratov, R.A., Muratov, K.R., and Gashev, E.A., Nanoroughness produced by systems with raster kinematics on surfaces of constant curvature, Russ. Eng. Res., 2010, vol. 30, no. 5, pp. 528–529.
Nekrasov, V.P., Controlled autorotation of the parts on flat lapping machine, in Povyshenie kachestva detalei na osnove sovershenstvovaniya okonchatel’nykh metodov obrabotki (Rising of the Quality of Parts Based on Improvement of Final Methods of Polishing), Perm, 1977, no. 208, pp. 62–67.
Muratov, R.A., Muratov, K.R., and Gashev, E.A., The device for autorotation of parts on machines with raster kinematics, Izv. Samar. Nauch. Tsentra, Ross. Akad. Nauk, 2013, vol. 15, no. 4 (2), pp. 384–386.
Nekrasov, V.P., Kinematic analysis of raster operating motion on the flat polishing, in Almazno-abrazivnaya obrabotka (Diamond-Abrasive Treatment), Perm: Perm. Politekh. Inst., 1969, pp. 99–106.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © K.R. Muratov, 2015, published in STIN, 2015, No. 9, pp. 23–26.
About this article
Cite this article
Muratov, K.R. Influence of rigid and frictional kinematic linkages in tool–workpiece contact on the uniformity of tool wear. Russ. Engin. Res. 36, 321–323 (2016). https://doi.org/10.3103/S1068798X16040122
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16040122