Upgrading Atmospheric Residue by Simultaneous Employment of Ionic Liquid, Ultrasonic, and Thermal Cracking

Document Type : Research Article

Authors

1 Department of Chemical Engineering, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad, I.R. IRAN

2 Oil and Gas Research Institute, Ferdowsi University of Mashhad, Mashhad, I.R. IRAN

3 Department of Chemical Engineering, Faculty of Chemical Engineering, Amirkabir University of Technology, Tehran, I.R. IRAN

Abstract

In this study, the effect of simultaneous employment of ultrasonic wave radiation, chemical substance of ionic liquid, and operating conditions of thermal cracking is investigated experimentally on upgrading the Atmospheric Residue (AR) of a crude oil atmospheric distillation tower. The five main factors of this process that are investigated are ionic liquid concentration, ultrasonic wave power, ultrasonic radiation time, temperature, and pressure. According to Box-Behnken Design, 46 experiments are conducted. Then, the proper experimental condition of this process is determined and hence, based on Multilevel Categoric Design the efficiency of seven different kinds of ionic liquids is compared. According to this design, 14 experiments are conducted. The results of 46 experiments conclude that this process is able to upgrade AR and even the simultaneous employment of ionic liquid, ultrasonic, and thermal cracking cause a synergistic effect on AR upgrading. Also, the results of 14 experiments indicate that 1-Propyl boronic acid-3-decylimidazolium bromide is a desirable ionic liquid for this process.

Keywords

Main Subjects


[1] Huijuan L., Huaqun Z., Xuqiang G., Wenle L., “Advances in Low-Quality Residual Oil Processing and Application Technology”, Sino-Global Energy, China (2012).
[2] Rahmani S., McCaffrey W.C., Dettman H.D., Gray M.R., Coking Kinetics of Asphaltenes as a Function of Chemical Structure, Energy Fuels,17(4): 1048-1056 (2003).
[3] Soleimani A., Sobati M.A., Movahedirad S., An Investigation on the Viscosity Reduction of Iranian Heavy Crude Oil through Dilution Method, Iran. J. Chem. Chem. Eng. (IJCCE), 40(3): 934-944 (2021).
[4] Rana M.S., Samano V., Ancheyta J., Diaz J.,
A Review of Recent Advances on Process Technologies for Upgrading of Heavy Oils and Residua, Fuel, 86(9): 1216-1231 (2007).
[5] Speight J.G., New Approaches to Hydroprocessing, Catal. Today, 98(1-2): 55-60 (2004).
[6] Speight J.G., “Heavy Oil Recovery and Upgrading”, Gulf Professional Publishing (2019).
[7] Speight J.G., “The Refinery of the Future”, William Andrew (2010).
[8] Kawai H., Kumata F., Free Radical Behavior in Thermal Cracking Reaction Using Petroleum Heavy Oil and Model Compounds, Catal. Today, 43(3-4): 281-289 (1998).
[9] Speight J.G., “The Chemistry and Technology of Petroleum”, CRC Press (2014).
[10] Speight J.G., “Oil and Gas Corrosion Prevention: From Surface Facilities to Refineries”, Gulf Professional Publishing (2014).
[11] Parkash S., “Refining Processes Handbook”, Gulf Professional Publishing (2003).
[12] Hsu C.S., Robinson P.R., “Practical Advances in Petroleum Processing”, Springer-Verlag, New York, (2006).
[13] Speight J.G., “Fouling in Refineries”, Gulf Professional Publishing (2015).
[14] Speight J.G., “Heavy and Extra-Heavy Oil Upgrading Technologies”, Gulf Professional Publishing, (2013).
[15] Cheremisinoff N.P., Rosenfeld P.E., “Handbook of Pollution Prevention and Cleaner Production, Vol. 1: Best Practices in the Petroleum Industry”, William Andrew (2009).
[16] Tailleur R.G., “Hydrocracking Catalyst to Produce High Quality Diesel Fraction”, 8th International Symposium on Scientific Bases for the Preparation of Heterogeneous Catalysts, Studies in Surface Science and Catalysis, Elsevier Science, 143: 321-329 (2000).
[17] Speight J.G., “Synthetic Fuels Handbook: Properties, Process and Performance”, McGraw-Hill Professional (2008).
[18] Nares R., Schacht-Hernandez P., Ramirez-Garnica M.A., Cabrera-Reyes Md.C., Upgrading Heavy and Extraheavy Crude Oil with Ionic Liquid, Int. Oil Conf. Exhibit., Society of Petroleum Engineers, June 27-30, Mexico (2007).
[19] Fan H-f., Li Z-b., Liang T., Experimental Study on Using Ionic Liquids to Upgrade Heavy Oil, J. Fuel Chem. Technol., 35(1): 32-35 (2007).
[20] Fan Z-x., Wang T-f., He Y-h., Upgrading and Viscosity Reducing of Heavy Oils by [BMIM][AlCl4] Ionic Liquid, J. Fuel Chem. Technol., 37(6): 690-693 (2009).
[21] Boukherissa M., Mutelet F., Modarressi A., Dicko A., Dafri D., Rogalski M., Ionic Liquids as Dispersants of Petroleum Asphaltenes, Energy Fuels, 23(5): 2557-2564 (2009).
[22] Subramanian D., Wu K., Firoozabadi A., Ionic Liquids as Viscosity Modifiers for Heavy and Extra-Heavy Crude Oils, Fuel, 143: 519-526 (2015).
[23] Sakthivel S., Velusamy S., Gardas R.L., Sangwai J.S., “Nature Friendly Application of Ionic Liquids for Dissolution Enhancement of Heavy Crude Oil”, SPE Annual Technic. Conf. Exhibit., Society of Petroleum Engineers, September 28-30, Houston, Texas, (2015).
[24] Ochoa R.N., Hernández P.S., Reyes Md.C.C., Garnica M.A.R., Vacío F.C., López R.J.R., Ionic liquid Catalyst for Improvement of Heavy and Extra Heavy Crude, US Patent, US9464239B2 (2016).
[25] Meindersma G.W., de Haan A.B., Conceptual Process Design for Aromatic/Aliphatic Separation with Ionic Liquids, Chem. Eng. Res. Des., 86(7): 745-752 (2008).
[26] Wang Y., Li H., Wang C., Jiang H., Ionic liquids as Catalytic Green Solvents for Cracking Reactions, ChemComm, (17): 1938-1939 (2004).
[27] Elomari S., Krug R.R., Miller S.J., Process to Make Base Oil from Thermally Cracked Waxy Feed Using Ionic Liquid Catalyst, US Patent, US7973204B2, (2011).
[28] Wang C., Guo L., Li H., Wang Y., Weng J., Wu L., Preparation of Simple Ammonium Ionic Liquids and Their Application in the Cracking of Dialkoxypropanes, Green Chem., 8(7): 603-607 (2006).
[29] Fister S., Fuchs S., Mester P., Kilpeläinen I., Wagner M., Rossmanith P., The Use of Ionic Liquids for Cracking Viruses for Isolation of Nucleic Acids, Sep. Purif. Technol., 155: 38-44 (2015).
[30] Villanueva M., Parajó J., Sánchez P.B., García J., Salgado J., Liquid Range Temperature of Ionic Liquids as Potential Working Fluids for Absorption Heat Pumps, J. Chem. Thermodyn., 91: 127-135 (2015).
[31] Huang X., Zhou C., Suo Q., Zhang L., Wang S., Experimental Study on Viscosity Reduction for Residual Oil by Ultrasonic, Ultrason. Sonochem., 41: 661-669 (2018).
[32] Jie C., Yudong S., Qiang Z., Lingyun Z., Qiong Z., Impact of Ultrasonic Treatment on Variations of Vacuum Residual Viscosity, Pet. Refin. Eng., (2): 9 (2015).
[33] Volkova G., Anufriev R., Yudina N., Effect of Ultrasonic Treatment on the Composition and Properties of Waxy High-Resin Oil, Petrol. Chem., 56(8): 683-689 (2016).
[34] Kaushik P., Kumar A., Bhaskar T., Sharma Y., Tandon D., Goyal H., Ultrasound Cavitation Technique for Up-Gradation of Vacuum Residue, Fuel Process. Technol., 93(1): 73-77 (2012).
[35] Zhong W-H., Zhang C-F., Wang A-X., Han P-F., Lue X-P., Synergy of Ultrasound and Tetrahydronaphthalene for Upgrading and Viscosity Reducing of Vacuum Residuum, Chem. Eng., 38(3): 91-94 (2010).
[36] Gopinath R., Dalai A.K., Adjaye J., Effects of Ultrasound Treatment on the Upgradation of Heavy Gas Oil, Energy Fuels, 20(1): 271-277 (2006).
[37] Lin J.R., Yen T.F., An Upgrading Process through Cavitation and Surfactant, Energy Fuels, 7(1): 111-8, (1993).
[38] Yang Z., Zhang C., Gu S., Han P., Lu X., Upgrading Vacuum Residuum by Combined Sonication and Treatment with a Hydrogen Donor, Chem. Technol. Fuels Oils, 48(6): 426-435 (2013).
[39] Castañeda L.C., Muñoz J.A.D., Ancheyta J., Combined Process Schemes for Upgrading of Heavy Petroleum, Fuel, 100: 110-127 (2012).
[40] Cataldo F., Ultrasound-Induced Cracking and Pyrolysis of Some Aromatic and Naphthenic Hydrocarbons, Ultrason. Sonochem., 7(1): 35-43, (2000).
[41] Mohapatra D.P., Kirpalani D.M., Bitumen Heavy Oil Upgrading by Cavitation Processing: Effect on Asphaltene Separation, Rheology, and Metal Content, Appl. Petrochem. Res., 6(2): 107-115 (2016).
[42] Gunnerman R., Moote P., Cullen M., Treatment of Crude Oil Fractions, Fossil Fuels, and Products Thereof with Ultrasound, US Patent, US20030051988A1 (2003).
[43] Askari M., Aliofkhazraei M., Afroukhteh S., A Comprehensive Review on Internal Corrosion and Cracking of Oil and Gas Pipelines, J. Nat. Gas Sci. Eng., 71: 102971 (2019).
[44] Sawarkar A.N., Cavitation Induced Upgrading of Heavy Oil and Bottom-of-the-Barrel: A Review, Ultrason. Sonochem., 58: 104690, (2019).
[45] Shahidian Z., Zare K., Improvement of Heavy Oil Hydrodesulfurization Catalyst Support Properties by Acetic Acid Treatment, Iran. J. Chem. Chem. Eng. (IJCCE), 39(3): 71-80 (2020).
[47] Mello Pd.A., Duarte F.A., Nunes M.A., Alencar M.S., Moreira E.M., Korn M., Ultrasound-Assisted Oxidative Process for Sulfur Removal from Petroleum Product Feedstock, Ultrason. Sonochem., 16(6): 732-736 (2009).
[48] Vinokurov V., Frolov V., Lesin S., Gushchin P., Activated Low-Temperature Viscosity Breaking of Heavy Oil with Additives of Iron Particles and Asphaltene and Paraffin Deposits, Theor. Found. Chem. Eng., 52(4): 681-685 (2018).
[49] Zuo Z., Zhang Z., Mi Y., Influence of Ultrasonic Assisted Ionic Liquid on Heavy Oil Structure, Pet. Sci. Technol., 37(3): 361-367 (2019).
[50] Song G., Wang D-H., Zhang Z., Liu M., Xu Q., Zhao D-Z., A Novel Ultrasonic-Assisted Method for Enhanced Yield of Light Oil in the Thermal Cracking of Residual Oil, Ultrason. Sonochem., 48: 103-109 (2018).
[51] Fan Q., Bai G., Liu Q., Sun Y., Yuan W., Wu S., The Ultrasound Thermal Cracking for the Tar-Sand Bitumen, Ultrason. Sonochem., 50: 354-362 (2019).
[52] Design Expert V. 10, Stat-Ease. Inc, Minneapolis, MN (2016).
[53] Rao J., Kumar B., “3D Blade Root Shape Optimization”, 10th Int. Conf. Vibrations in Rotating Machinery, September 11-13, Imeche London, UK, Woodhead Publishing, (2012).
[54] Zhang Y., Zhen B., Li H., Feng Y., Basic Ionic Liquid as Catalyst and Surfactant: Green Synthesis of Quinazolinone in Aqueous Media, RSC Adv., 8(64): 36769-36774 (2018).