This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.5.0) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).
The forest is classed as a tall, wet sclerophyll forest, and the dominant Eucalyptus Regnans or mountain ash trees have an average canopy height of 75 m. The site contains a chronosequence of (20, 80 and 300) stand ages that were established during fires occurring over the last 300 years. The area is assigned the IUCN Category II (National Parks) of the United Nations’ list of National Parks and protected areas, which means the park is primarily managed for ecosystem conservation. The catchment area is dominated by mountain ash, the world’s tallest flowering plant (angiosperm). Trees can reach heights of more than 90 m in areas with high rainfall and fertile soil. Mountain ash forests are confined to the cool mountain regions with elevations ranging from 460 to 1100 m and average rainfalls of 1100 to 2000 mm/y. These trees are well distributed throughout Victoria’s Central Highlands including the Otway Ranges and Strzlecki Ranges; they are also found in Tasmania. The catchment area contains a portion of the Mt. Disappointment range, the Divide and the headwaters of Wallaby Creek and Silver Creek, and much of the slopes are characterised as flat to moderate.
The station itself is located within an old growth stand with individual trees as old as 300 years. Below the dominant canopy lies a temperate rainforest understorey consisting of Pomaderris aspera and Olearia argophylla species, which are 10 to 18 m tall. The lower layers of vegetation are dominated by tree ferns (Cyathea australis and Dicksonia antartica) and extensive tracts of rosette and rhizonic ferns (Polystichum proliferum and Blechnum wattsii) as well as acacia trees. The elevation is approximately 720 m. The major soil type within the forest is krasnozemic soils, which are friable red/brown soils, with high amounts of organic matter in the upper 20 to 30 cm. However, the composition of krasnozemic soils is not homogenous, but rather varies with altitude. Grey-yellow podsolised soils can be found at lower altitudes, while krasnozemic loams is characteristic of the higher altitudes of the Kinglake and of the Hume Plateau. The clay content of these soils increases with depth until at least 200 cm deep, where after a transition soils contain rock fragments. The climate of the study area is classified as a cool, temperate zone, with the highest temperatures occurring during the summer months of December – February (13.8 to 22.5 °C), whilst the coolest temperatures are experienced in May and August (4.7 to 9.2 °C). Average annual precipitation is 1209 mm, with a maximum rainfall occurring in June (Ashton, 2000). The study site experiences foggy conditions after sunset during autumn and winter.
The original station had a main mast at 110 m. This station was destroyed in February 2009 by bushfires. A replacement station was established in March 2010 and started recording in May 2010. The mast sat at a height of 5 m. The post-fire instrumentation was not as diverse as the pre-fire instrumentation.
Credit
We at TERN acknowledge the Traditional Owners and Custodians throughout Australia, New Zealand and all nations. We honour their profound connections to land, water, biodiversity and culture and pay our respects to their Elders past, present and emerging.
The station was established in August 2005 by Monash University as part of an ARC funded sustainable futures project, number DP0451247. It was operated in collaboration with Charles Darwin University and University of Alaska Fairbanks and supported by TERN. The flux station was part of the Australian OzFlux Network and contributed to the international FLUXNET Network.
Purpose
The research aim of the Wallaby Creek flux station is to:
- understand the complex coupling of carbon, water and energy cycles within Australia's old growth temperate forests over various scales in order to assess the impact of future environmental change
- measure exchanges of carbon dioxide, water vapour and energy between an old growth, tall forest and the atmosphere using micrometeorological techniques
- quantify the carbon sink/source of a temperate, old growth mountain ash forest and identify the contribution of such forests to the continents 'National Carbon Inventory'
- provide a database of microclimate and ecological parameters for use in carbon and water modelling projects
- investigate how carbon cycles change over successional time scales (decadal to centennial).
Data Processing
File naming convention
The NetCDF files follow the naming convention below:
SiteName_ProcessingLevel_FromDate_ToDate_Type.nc
- SiteName: short name of the site
- ProcessingLevel: file processing level (L3, L4, L5, L6)
- FromDate: temporal interval (start), YYYYMMDD
- ToDate: temporal interval (end), YYYYMMDD
- Type (Level 6 only): Summary, Monthly, Daily, Cumulative, Annual
- Summary: This file is a summary of the L6 data for daily, monthly, annual and cumulative data. The files Monthly to Annual below are combined together in one file.
- Monthly: This file shows L6 monthly averages of the respective variables, e.g. AH, Fc, NEE, etc.
- Daily: same as Monthly but with daily averages.
- Cumulative: File showing cumulative values for ecosystem respiration, evapo-transpiration, gross primary productivity, net ecosystem exchange and production as well as precipitation.
- Annual: same as Monthly but with annual averages.
Lineage
All flux raw data is subject to the quality control process OzFlux QA/QC to generate data from L1 to L6. Levels 3 to 6 are available for re-use. Datasets contain Quality Controls flags which will indicate when data quality is poor and has been filled from alternative sources. For more details, refer to Isaac et al. (2017).