Frontiers in Educational Research, 2022, 5(19); doi: 10.25236/FER.2022.051912.
Xianglei Wang1, Yanfang Shi2, Zhiping Liu1, Kun Wang1, Xiaomei Zhu1
1Department of Chemical Engineering, Ordos Institute of Technology, Ordos, China
2Yijinhuoluo Campus of Ordos No.1 High School, Ordos, China
The rapid development of lithium-ion battery industry has put forward an urgent demand for qualified and efficient practical personnel. New energy technologies/ materials include lithium-ion batteries, fuel cells, photovoltaic cells, hydrogen energy, etc. Lithium-ion battery teaching content is an important component of new energy technology/materials courses. How to introduce software simulation into lithium-ion battery classroom teaching is the focus of this paper. This paper introduces the structure diagram, working principle, concept and aging mechanism of lithium ion battery related to software simulation technology. Combining software simulation technology with classroom teaching can play a complementary role. Software simulation technology can strengthen the basic knowledge and the application scenario of lithium ion battery. Classroom teaching can provide foundation and theoretical support for software modelling.
modelling, structure diagram, working principle, concept, aging mechanism
Xianglei Wang, Yanfang Shi, Zhiping Liu, Kun Wang, Xiaomei Zhu. Application of Software Modeling and Simulation in Lithium-ion Battery Teaching. Frontiers in Educational Research (2022) Vol. 5, Issue 19: 66-71. https://doi.org/10.25236/FER.2022.051912.
[1] M.Doyle, J.Newman, A.S.Gozdz, C.N.Schmutz, and J.M.Tarascon, Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells, J. Electrochem. Soc.1996, 143(5): 1890-1903.
[2] D. P. Abraham, S. Kawauchi, and D. W. Dees, Modeling the impedance versus voltage characteristics of LiNi0.08Co0.15Al0.05O2, Electrochim. Acta, 2008, 53: 2121-2129.
[3] M. Guo, G. Sikha, and R.E. White. Single Particle Model for a lithium Ion Cell: Thermal Behavior, J. Electrochem. Soc. 2011, 158(2):122-132.
[4] A. Nyman, T. G. Zavalis, R. Elger, M. Behm, and G. Lindbergh, Analysis of the Polarization in Li-Ion Battery Cell by Numerical Simulations, J. Electrochem. Soc.2010, 157(11): 1236-1246.
[5] H. Ekström and G. Lindbergh, A model for predicting capacity fade due to SEI formation in a commercial Graphite/LiFePO4 cell, J. Electrochemical Society, 2015, 162: 1003-1007.
[6] G. Ning, R. White, and B. Popov, A generalized cycle life model of rechargeable Li-ion batteries, Electrochimica Acta, 2006, 51:2012-2022.
[7] J.B.Siegel, A.G. Stefanopoulous, P. Hagans, Y.Ding, and D. Gorsich, Expansion of Lithium Ion Pouch Cell Batteries: Observations from Neutron Imaging J. Electrochemical Soc. 2013, 160(8):1031-1038.
[8] Y-T. Cheng, and M.W. Verbrugge, Evolution of stress within a spherical insertion electrode particle under potentiostatic and galvanostatic operation, Journal of Power Sources, 2009, 190:453-460.
[9] T. Zavalis, M. Behm, and G. Lindbergh, Investigation of Short-Circuit Scenarios in a Lihtium-Ion Battery Cell, Journal of the Electrochemical Society, 2012, 159(6): 848-859.