ISIJ International
Online ISSN : 1347-5460
Print ISSN : 0915-1559
ISSN-L : 0915-1559
Regular Article
Effect of Cooling Rate and Titanium Additions on Microstructure of Thin-Walled Compacted Graphite Iron Castings
Marcin Górny Magdalena KawalecGabriela SikoraHugo Lopez
Author information
JOURNAL OPEN ACCESS FULL-TEXT HTML

2014 Volume 54 Issue 10 Pages 2288-2293

Details
Abstract

This article addresses the effect of cooling rate and of titanium additions on the exhibited microstructure of thin-walled compacted graphite iron (TWCI) castings as determined by changing molding media, section size and Ferro Titanium. The research work was carried out on TWCI castings and reference castings of 2–5 mm and 13 mm wall thickness, respectively. Various molding materials were employed (silica sand and insulating sand ‘‘LDASC’’) to achieve different cooling rates. Thermal analysis was implemented for determinations of the actual cooling rates at the onset of solidification. This study shows that the cooling rates exhibited in the TWCI castings varies widely (70–14°C/s) when the wall thickness is changed from 2 to 5 mm. In turn, this is accompanied by a significant variation in the compacted graphite fraction. The resultant cooling rates were effectively reduced by applying an insulating sand in order to obtain the desired graphite compactness. In addition, good agreement was found between the theoretical predictions of the solidification process and the experimental outcome. Ti additions in combination with LDASC sand molds were highly effective in promoting the development of over 80% compacted graphite in castings with wall thicknesses of 2 and 3 mm as evidenced by quantitative metallographic analyses.

Content from these authors
© 2014 by The Iron and Steel Institute of Japan
Previous article Next article
feedback
Top