[1] R. Winston Revie; Herbert H. Uhlig, Corrosion and Corroison Control: An Introduction to Corrosion Science and Engineering, Fourth Edi, A John Wiley & Sons INC., 2008.
[2] J. Basumatary, R.J.K. Wood, Synergistic effects of cavitation erosion and corrosion for nickel aluminium bronze with oxide film in 3.5% NaCl solution, Wear. 376–377 (2017) 1286–1297. doi:10.1016/J.WEAR.2017.01.047.
[3] S. Skal, Y. Kerroum, A. Guenbour, A. Bellaouchou, R. Boulif, H. Idrissi, et al., Erosion–Corrosion Effect on the Alloy 316L in Polluted Phosphoric Acid, J. Bio- Tribo-Corrosion. 5 (2019). doi:10.1007/s40735-019-0270-4.
[4] R.J.K. Wood, J. a. Wharton, A.J. Speyer, K.S. Tan, Investigation of erosion-corrosion processes using electrochemical noise measurements, Tribiology Int. 35 (2002) 631–641. doi:10.1016/S0301-679X(02)00054-3.
[5] N. Khayatan, H.M. Ghasemi, M. Abedini, Synergistic erosion-corrosion behavior of commercially pure titanium at various impingement angles, Wear. 380–381 (2017) 154–162. doi:10.1016/j.wear.2017.03.016.
[6] H. Lu, J. Shang, X. Jia, Y. Li, F. Li, J. Li, et al., Erosion and corrosion behavior of shrouded plasma sprayed Cr3C2-NiCr coating, Surf. Coatings Technol. 388 (2020) 125534. doi:10.1016/j.surfcoat.2020.125534.
[7] F. Huang, J. jie Kang, W. Yue, X. bin Liu, Z. qiang Fu, L. na Zhu, et al., Effect of heat treatment on erosion–corrosion of Fe-based amorphous alloy coating under slurry impingement, J. Alloys Compd. 820 (2020) 153132. doi:10.1016/j.jallcom.2019.153132.
[8] G.A. Ludwig, C.F. Malfatti, R.M. Schroeder, V.Z. Ferrari, I.L. Muller, WC10Co4Cr coatings deposited by HVOF on martensitic stainless steel for use in hydraulic turbines: Resistance to corrosion and slurry erosion, Surf. Coatings Technol. 377 (2019) 124918. doi:10.1016/j.surfcoat.2019.124918.
[9] L. Chen, S.L. Bai, Y.Y. Ge, Q.Y. Wang, Erosion-corrosion behavior and electrochemical performance of Hastelloy C22 coatings under impingement, Appl. Surf. Sci. 456 (2018) 985–998. doi:10.1016/j.apsusc.2018.06.209.
[10] C.K. Lee, Structure, electrochemical and wear-corrosion properties of electroless nickel-phosphorus deposition on CFRP composites, Mater. Chem. Phys. 114 (2009) 125–133. doi:10.1016/j.matchemphys.2008.08.088.
[11] Z. Li, Z. Farhat, M.A. Islam, Investigation of Single-Particle Erosion Behavior of Electroless Ni-P-Ti Composite Coatings, J. Mater. Eng. Perform. (2020). doi:10.1007/s11665-020-04722-z.
[12] D.G. Agredo Diaz, A. Barba Pingarrón, J.J. Olaya Florez, J.R. González Parra, J. Cervantes Cabello, I. Angarita Moncaleano, et al., Effect of a Ni-P coating on the corrosion resistance of an additive manufacturing carbon steel immersed in a 0.1 M NaCl solution, Mater. Lett. 275 (2020) 128159. doi:10.1016/j.matlet.2020.128159.
[13] D.R. Dhakal, G. Gyawali, Y.K. Kshetri, J.H. Choi, S.W. Lee, Microstructural and electrochemical corrosion properties of electroless Ni-P-TaC composite coating, Surf. Coatings Technol. 381 (2020) 125135. doi:10.1016/j.surfcoat.2019.125135.
[14] N. Ghavidel, S.R. Allahkaram, R. Naderi, M. Barzegar, H. Bakhshandeh, Corrosion and wear behavior of an electroless Ni-P/nano-SiC coating on AZ31 Mg alloy obtained through environmentally-friendly conversion coating, Surf. Coatings Technol. 382 (2020) 125156. doi:10.1016/j.surfcoat.2019.125156.
[15] A.R. Shashikala, B.S. Sridhar, Codeposition of electroless Ni-P/ZnO nano composites and evaluation of corrosion resistance of the coatings, Mater. Today Proc. 45 (2019) 3837–3840. doi:10.1016/j.matpr.2020.05.447.
[16] J. Chen, G. Zhao, K. Matsuda, Y. Zou, Microstructure evolution and corrosion resistance of Ni–Cu–P amorphous coating during crystallization process, Appl. Surf. Sci. 484 (2019) 835–844. doi:10.1016/j.apsusc.2019.04.142.
[17] C. Ma, F. Wu, Y. Ning, F. Xia, Y. Liu, Effect of heat treatment on structures and corrosion characteristics of electroless Ni-P-SiC nanocomposite coatings, Ceram. Int. 40 (2014) 9279–9284. doi:10.1016/j.ceramint.2014.01.150.
[18] R. Soleimani, F. Mahboubi, M. Kazemi, S.Y. Arman, Corrosion and tribological behaviour of electroless Ni-P/nano-SiC composite coating on aluminium 6061, Surf. Eng. 31 (2015) 714–721. doi:10.1179/1743294415Y.0000000012.
[19] A. Farzaneh, M. Mohammadi, M. Ehteshamzadeh, F. Mohammadi, Electrochemical and structural properties of electroless Ni-P-SiC nanocomposite coatings, Appl. Surf. Sci. 276 (2013) 697–704. doi:10.1016/j.apsusc.2013.03.156.
[20] B. Jiang, S.L. Jiang, A.L. Ma, Y.G. Zheng, Effect of heat treatment on erosion-corrosion behavior of electroless Ni-P coatings in saline water, Mater. Manuf. Process. 29 (2014) 74–82. doi:10.1080/10426914.2013.852222.
[21] C. Sun, J. Li, V. Fattahpour, M. Roostaei, M. Mahmoudi, H. Zeng, et al., Insights into the erosion-enhanced corrosion on electroless Ni–P coating from single particle impingement, Corros. Sci. 166 (2020) 108422. doi:10.1016/j.corsci.2019.108422.
[22] Z. Li, M.A. Islam, Z. Farhat, Investigation of Erosion–Corrosion Resistance of Electroless Ni–P–Ti Composite Coatings, J. Bio- Tribo-Corrosion. 6 (2020). doi:10.1007/s40735-020-00404-4.
[23] C. Wang, Z. Farhat, G. Jarjoura, M.K. Hassan, A.M. Abdullah, Indentation and erosion behavior of electroless Ni-P coating on pipeline steel, Wear. 376–377 (2017) 1630–1639. doi:10.1016/j.wear.2016.12.054.
[24] J.A. Calderón, J.E. Henao, M.A. Gómez, Erosion-corrosion resistance of Ni composite coatings with embedded SiC nanoparticles, Electrochim. Acta. 124 (2014) 190–198. doi:10.1016/j.electacta.2013.08.185.
[25] A. Pasha, H.M. Ghasemi, J. Neshati, Synergistic Erosion–Corrosion Behavior of X-65 Carbon Steel at Various Impingement Angles, J. Tribol. 139 (2016) 011105. doi:10.1115/1.4033336.
[26] Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements, ASTM G109. (1999) 1–7. http://www.astm.org/Standards/G102.htm.
[27] Standard Guide for Determining Synergism Between Wear and Corrosion, ASTM G119. (1994) 1–7. doi:10.1520/G0119-09.2.
[28] S. Zhang, K. Han, L. Cheng, The effect of SiC particles added in electroless Ni-P plating solution on the properties of composite coatings, Surf. Coatings Technol. 202 (2008) 2807–2812. doi:10.1016/j.surfcoat.2007.10.015.
[29] A. Zoikis-Karathanasis, E.A. Pavlatou, N. Spyrellis, Pulse electrodeposition of Ni-P matrix composite coatings reinforced by SiC particles, J. Alloys Compd. 494 (2010) 396–403. doi:10.1016/j.jallcom.2010.01.057.
[30] X. Yuan, D. Sun, H. Yu, H. Meng, Z. Fan, X. Wang, Preparation of amorphous-nanocrystalline composite structured Ni-P electrodeposits, Surf. Coatings Technol. 202 (2007) 294–300. doi:10.1016/j.surfcoat.2007.05.040.
[31] M.C. Chou, M. Der Ger, S.T. Ke, Y.R. Huang, S.T. Wu, The Ni-P-SiC composite produced by electro-codeposition, Mater. Chem. Phys. 92 (2005) 146–151. doi:10.1016/j.matchemphys.2005.01.021.
[32] I. Apachitei, F.D. Tichelaar, J. Duszczyk, L. Katgerman, The effect of heat treatment on the structure and abrasive wear resistance of autocatalytic NiP and NiP-SiC coatings, Surf. Coatings Technol. 149 (2002) 263–278. doi:10.1016/S0257-8972(01)01492-X.
[33] G.E. Dieter, Mechanical Metallurgy, SI Metric, McGraw-Hill, Singapore, 1928.
[34] M. Abedini, H.M. Ghasemi, Synergistic erosion – corrosion behavior of Al – brass alloy at various impingement angles, Wear. 319 (2014) 49–55. doi:10.1016/j.wear.2014.07.008.
[35] M. Abedini, H.M. Ghasemi, Erosion and erosion–corrosion of Al-brass alloy: Effects of jet velocity, sand concentration and impingement angle on surface roughness, Trans. Nonferrous Met. Soc. China. 27 (2017) 2371–2380. doi:10.1016/S1003-6326(17)60263-2.