Thermodynamical and Experimental Study of the Effects of Ball Clay-Silica Fume Combination on the Hydration and Strength

Document Type : Research Papers

Authors

1 Shahid Rajaee Teacher Training University

2 Department of Civil Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran

Abstract

The production of ordinary Portland cement (OPC) as the most expensive constituent of concrete is associated with destructive environmental effects and significant energy consumption. Thus, the use of supplementary cementitious materials such as Natural or synthetic pozzolans is a fundamental solution that affects the kinetics of hydration of cementitious materials. In this article, to evaluate the effect of ball clay in the presence or absence of silica fume on the performance of cementitious materials, compressive strength and ultrasonic tests were performed at replacement weight percentages of 0, 10 and 20% for ball clay and 0 and 7% for silica fume. Also, thermodynamic modeling during hydration was carried out based on the Gibbs free energy minimization. The results showed that mere presence of ball clay does not have a positive effect, but it can improve the structure and strength of cement in the presence of silica fume, since it resulted in complete consumption of portlandite and consequently increasing C-S-H gel. In addition to examine the type and volume of phases formed during hydration, the optimum substitution of ball clay and silica fume was studied. Accordingly, the best overall performance of ball clay was observed in the 10% substitution in the presence of 7% silica fume.

Keywords


 
Andreola, F., Siligardi, C., Manfredini, T. and Carbonchi, C. (2009). "Rheological behaviour and mechanical properties of porcelain stoneware bodies containing Italian clay added with bentonites", Ceramics International, 35(3), 1159-1164.
Bentar, A., Goldman, A. and Cohen, M. (1987). "The contribution of transition zone to the strength of high quality silica fume concrete", Proceedings of Materials Research Society Symposium, Boston.
Berner, U. (1988). "Modelling the incongruent dissolution of hydrated cement minerals", Radiochimica Acta, 44(2), 387-394.
Bhanja, S. and Sengupta, B. (2003). "Optimum silica fume content and its mode of action on concrete", Materials Journal, 100(5), 407-412.
Brown, P. (1989). "Phase equilibria and cement hydration", Materials Science of Concrete, 1(1), 73-94.
Cheng-Yi, H. and Feldman, R.F. (1985). "Hydration reactions in Portland cement-silica fume blends", Cement and Concrete Research, 15(4), 585-592.
Gartner, E. (2004). "Industrially interesting approaches to 'low-CO2' cements", Cement and Concrete Research, 34(9), 1489-1498.
Gartner, E.M. and Jennings, H.M. (1987). "Thermodynamics of calcium silicate hydrates and their solutions", Journal of the American Ceramic Society, 70(10), 743-749.
Gleize, P., Müller, A. and Roman, H.R. (2003). "Microstructural investigation of a silica fume–cement–lime mortar", Cement and Concrete Composites, 25(2), 171-175.
Hosterman, J.W. (1949). "Ball clay and Bentonite deposits of the central and Eastern Gulf of Mexico coastal plain, United States", US Department of the Interior, Geological Survey, Washington, DC.
Juenger, M., Winnefeld, F.,  Provis, J.L. and Ideker, J. (2011). "Advances in alternative cementitious binders", Cement and Concrete Research, 41(12), 1232-1243.
Kadri, E. and Duval, R. (1998). "Influence of silica fume on the workability and compressive strength of high performance concrete", Cement and Concrete Research, 28(4), 533-547.
Kunther, W., Dai, Z. and Skibsted, J. (2016). "Thermodynamic modeling of hydrated white Portland cement–metakaolin–limestone blends utilizing hydration kinetics from 29Si MAS NMR spectroscopy", Cement and Concrete Research, 86, 29-41.
Le Saoût, G., Lothenbach, B., Taquet, P., Fryda, H. and Winnefeld, F. (2017). "Hydration of calcium aluminate cement blended with anhydrite", Advances in Cement Research, 30(1), 24-36.
Lothenbach, B., Albert, B., Morin, V. and Gartner, E. (2015). "Hydration of belite-ye’elimite-ferrite cements: Thermodynamic modeling", 14th International Congress on the Chemistry of Cement (ICCC), Beijing, China.
Lothenbach, B., Damidot, D., Matschei, T. and Marchand, J. (2010). "Thermodynamic modelling: State of knowledge and challenges", Advances in Cement Research, 22(4), 211-223.
Martin, L.H., Winnefeld, F., Müller, C.J. and Lothenbach, B. (2015). "Contribution of limestone to the hydration of calcium sulfoaluminate cement", Cement and Concrete Composites, 62, 204-211.
Martin, L.H., Winnefeld, F., Tschopp, E., Müller, C.J. and Lothenbach, B. (2017). "Influence of fly ash on the hydration of calcium sulfoaluminate cement", Cement and Concrete Research, 95, 152-163.
Pradhan, D. and Dutta, D. (2013). "Influence of silica fume on normal concrete", International Journal of Engineering Research and Applications, 3(5), 79-82.
Purohit, A., Chander, S., Hameed, A., Singh, P. and Dhaka, M. (2016). "Structural, dielectric and surface morphological properties of ball clay with wet grinding for ceramic electrical insulators", Materials Chemistry and Physics, 181, 359-366.
Reardon, E. J. (1992). "Problems and approaches to the prediction of the chemical composition in cement/water systems", Waste Management, 12(2-3), 221-239.
Schöler, A., Lothenbach, B., Winnefeld, F. and Zajac,  M. (2015). "Hydration of quaternary Portland cement blends containing blast-furnace slag, siliceous fly ash and limestone powder", Cement and Concrete Composites, 55, 374-382.
Siddique, R. and Khan, M.I. (2011). Silica fume, supplementary cementing materials, Springer, 67-119.
Tarighat, A., Modarres, Y. and Mohammadi, M. (2018). "Thermodynamic modeling of the effects of wollastonite-silica fume combination in the cement hydration and sulfate attack", Civil Engineering Infrastructures Journal, 51(1), 87-100.
Tarighat, A., Mohammadi, M. and Modarres, Y. (2019). "Thermodynamical study of hydration and chemical shrinkage of cement containing slag", Sharif Journal of Civil Engineering, 34(2), 75-82.
Winnefeld, F., Ben Haha, M., Le Saout, G., Costoya, M., Ko, S.-C. and Lothenbach, B. (2015). "Influence of slag composition on the hydration of alkali-activated slags", Journal of Sustainable Cement-Based Materials, 4(2), 85-100.
Zajac, M., Rossberg, A., Le Saout, G. and Lothenbach,  B. (2014). "Influence of limestone and anhydrite on the hydration of Portland cements", Cement and Concrete Composites, 46, 99-108.