[1] Perlmutter, M., Breit. S., The future of the MEMS inertial sensor performance, design and manufacturing, IEEE, Intertial sensors and systems (ISS), in DGON, 2016.
[2] Pitchappa, P., Manjappa, M., Ho, C.P., Singh, R., Singh, N., Lee, C., Active control of electromagnetically induced transparency analog in terahertz MEMS metamaterial, Advanced Optical Materials, 4(4), 2016, 541-547.
[3] Mobki, H., Majidzadeh Sabegh, A., Azizi, A., Ouakad, H.M., On the implementation of adaptive sliding mode robust controller in the stabilization of electrically actuated micro-tunable capacitor, Microsystem Technologies, 26, 2020, 3903-3916.
[4] Mobki, H., Jalilirad, M., Vatankhah Moradi, M., Azizi, A., Multi input versus single input sliding mode for closed-loop control of capacitive micro structures, SN Applied Sciences, 1(7), 2019, 1-13.
[5] Zhou, Q., Sussman, A., Chang, J., Dong, J., Zettl, A., Mickelson, W., Fast response integrated MEMS microheaters for ultra low power gas detection, Sensors and Actuators A: Physical, 223, 2015, 67-75.
[6] Choudhary, V., Iniewski, K., Mems: fundamental technology and applications, CRC Press, New York, 2017
[7] Liu, H., Zhang, L., Li, K.H.H., Tan, O.K., Microhotplates for metal oxide semiconductor gas sensor applications Towards the CMOS-MEMS monolithic approach, Micromachines, 9(11), 2018, 557.
[8] Mishra, M.K., Dubey, V., Mishra, P. M., Khan, I., MEMS technology: A review, Journal of Engineering Research and Reports, 4(1), 2019, 1-24.
[9] Mobki, H.,,Rashvand, K., Rezazadeh, G., Afrang, S., Sadegh, H.M., Design, simulation and bifurcation analysis of a novel micromachined tunable capacitor with extended tenability, Transactions of the Canadian Society for Mechanical Engineering, 38(1), 2014, 15-29.
[10] Zamanzadeh, M., Jafarsadeghi-Pournaki, I., Ouakad, H.M., A resonant pressure MEMS sensor based on levitation force excitation detection, Nonlinear Dynamics, 100(2), 2020, 1105-1123.
[11] Moory-Shirbani, M., Sedighi, H.M., Ouakad, H.M., Najar, F., Experimental and mathematical analysis of a piezoelectrically actuated multilayered imperfect microbeam subjected to applied electric potential, Composite Structures, 184, 2018, 950-960.
[12] Yahiaoui, R., Zeggari, R., Malapert, J., Manceau, J-F., A MEMS-based pneumatic micro-conveyor for planar micromanipulation, Mechatronics, 22(5), 2012, 515-521.
[13] Atabak, R., Sedighi, H.M., Reza, A., Mirshekari, E., Instability analysis of bi-axial micro-scanner under electromagnetic actuation including small scale and damping effects, Microsystem Technologies, 26, 2020, 1-24.
[14] Siahpour, S., Zand, M.M., Mousavi, M., Dynamics and vibrations of particle-sensing MEMS considering thermal and electrostatic actuation, Microsystem Technologies, 24(3), 2018, 1545-1552.
[15] Zhang, W.M., Yan, H., Peng, Z.K., Meng, G., Electrostatic pull-in instability in MEMS/NEMS: A review, Sensors and Actuators A: Physical, 214, 2014, 187-218.
[16] Ouakad, H.M., Comprehensive numerical modeling of the nonlinear structural behavior of MEMS/NEMS electrostatic actuators under the effect of the van der Waals forces, Microsystem Technologies, 23(12), 2017, 5903-5910.
[17] Azizi, A., Mobki, H., Rezazadeh, G., Bifurcation behavior of a capacitive micro-beam suspended between two conductive plates, International Journal of Sensor Networks and Data Communications, 5(149), 2016, 1-10.
[18] Do, C., Lishchynska, M., Delaney, K., Hill, M., Generalized closed-form models for pull-in analysis of micro cantilever beams subjected to partial electrostatic load, Sensors and Actuators A: Physical, 185, 2012, 109-116.
[19] Kaveh Rashvand, K., Rezazadeh, G., Mobki, H., Ghayesh, M.H., On the size-dependent behavior of a capacitive circular micro-plate considering the variable length-scale parameter, International Journal of Mechanical Sciences, 77, 2013, 333-342.
[20] Fard, K.M., Gharechahi, A., Fard, N.M., Mobki, H., Investigation of dynamic instability of three plates switch under step DC voltage actuation using modified couple stress theory, Latin American Journal of Solids and Structures, 15(7), 2018, 1-17.
[21] Wang, B., Zhou, S., Zhao, J., Chen, X., Size-dependent pull-in instability of electrostatically actuated microbeam-based MEMS, Journal of Micromechanics and microengineering, 21(2), 2011, 027001.
[22] Kamon, M., Maity, S., Reus, D.D., Zhang, Z., Cunningham, S., Kim, S., Killop, J.M., Morris, A., Lorenz, G., Daniel, L., New simulation and experimental methodology for analyzing pull-in and release in MEMS switches, Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS & EUROSENSORS XXVII), Barcelona, 2013.
[23] Somà, A., Saleem, M.M., Margesin, B., Armando, M., Pull-in tests of MEMS specimens for characterization of elastic–plastic behavior, Microsystem Technologies, 25(7), 2019, 2525-2533.
[24] Pallay, M., Towfighian, S., A reliable MEMS switch using electrostatic levitation, Applied Physics Letters, 113(21), 2018, 213102.
[25] Han, J., Li, L., Jin, G., Ma, W., Feng, J., Jia, H., Chang, D., Qualitative identification of the static pull-In and fundamental frequency of one-electrode MEMS resonators, Micromachines, 9(12), 2018, 614.
[26] Tahani, M., Askari, A.R., Accurate electrostatic and van der Waals pull-in prediction for fully clamped nano/micro-beams using linear universal graphs of pull-in instability, Physica E: Low-dimensional Systems and Nanostructures, 63, 2014, 151-159.
[27] Raman, R., Shanmuganantham, T., Sindhanaiselvi, D., Analysis of RF MEMS series switch with serpentine spring shaped cantilever beam for wireless applications, Materials Today: Proceedings, 5(1), 2018, 1890-1896.
[28] Zulkefli, M.A., Mohamed, M.A., Siow, K.S., Majlis, B.Y., Kulothungan, J., Muruganathan, M., Mizuta, H., Three-dimensional finite element method simulation of perforated graphene nano-electro-mechanical (NEM) switches, Micromachines, 8(8), 2017, 236.
[29] Najmi, M., Wahid, M.H.A., Johari, S., Mahayudin, A.F.A., Zainol, Z., MEMS parallel plate beam actuator: Correlation study of pull-in voltage and dielectric layer beyond 1µm displacement, International Electronic Conference on Sensors and Applications session MEMS and NEMS, MDPI, 2014.
[30] Mobki, H., Sadeghi, M.H., Afrang, S., Rezazadeh, G., On the tunability of a MEMS based variable capacitor with a novel structure, Microsystem Technologies, 17(9), 2011, 1447-1452.
[31] Afrang, S., Mobki, H., Hassanzadeh, M., Rezazadeh, G., Design and simulation of a MEMS analog micro-mirror with improved rotation angle, Microsystem Technologies, 25(3), 2019, 1099-1109.
[32] Apuzzo, A., Barretta, R., Fabbrocino, F., Faghidian, S.A., Luciano, R., Sciarra, F.M., Axial and torsional free vibrations of elastic nano-beams by stress-driven two-phase elasticity, Journal of Applied and Computational Mechanics, 5(2), 2019, 402-413.
[33] Abbondanza, D., Battista, D., Morabito, F., Pallante, C., Barretta, R., Luciano, R., Sciarra, F.M., Ruta, G., Linear dynamic response of nanobeams accounting for higher gradient effects, Journal of Applied and Computational Mechanics, 2(2), 2016, 54-64.
[34] Barretta, R., Faghidian, S.A., Sciarra, F.M.D., Stress-driven nonlocal integral elasticity for axisymmetric nano-plates, International Journal of Engineering Science, 136, 2019, 38-52.
[35] Romano, G., Barretta, R., Nonlocal elasticity in nanobeams: the stress-driven integral model, International Journal of Engineering Science, 115, 2017, 14-27.
[36] Barretta, R., Canadija, M., Luciano, R., Sciarra, F.M., Stress-driven modeling of nonlocal thermoelastic behavior of nanobeams, International Journal of Engineering Science, 126, 2018, 53-67.
[37] Beni, Z.T., Ravandi, S.H., Beni, Y.T, Size-dependent nonlinear forced vibration analysis of viscoelastic/piezoelectric nano-beam, Journal of Applied and Computational Mechanics, 7(4), 2021, 1878-1891.
[38] Eltaher, M.A., Agwa, M., Kabeel, A., Vibration analysis of material size-dependent CNTs using energy equivalent model, Journal of Applied and Computational Mechanics, 4(2), 2018, 75-86.
[39] Ghodrati, B., Yaghootian, A., Zadeh, A.G., Mohammad-Sedighi, H., Lamb wave extraction of dispersion curves in micro/nano-plates using couple stress theories, Waves in Random and Complex Media, 28(1), 2018, 15-34.
[40] Keivani, M., Koochi, A., Kanani, A., Mardaneh, M.R., Sedighi, H.M., Abadyan, M., Using strain gradient elasticity in conjunction with Gurtin–Murdoch theory for modeling the coupled effects of surface and size phenomena on the instability of narrow nano-switch, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 231(17), 2017, 3277-3288.
[41] Soltani, D., Khorshidi, M.A., Sedighi, H.M., Higher order and scale-dependent micro-inertia effect on the longitudinal dispersion based on the modified couple stress theory, Journal of Computational Design and Engineering, 8(1), 2021, 189-194.
[42] Abdehvand, M.Z., Roknizadeh, S.A.S., Sedighi, H.M., Modeling and analysis of a coupled novel nonlinear magneto-electro-aeroelastic lumped model for a flutter based energy harvesting system, Physica Scripta, 96(2), 2020, 025213.
[43] Mobki, H., Rezazadeh, G., Sadeghi, M., Vakili-Tahamia, F., Seyyed-Fakhrabadi, M-M., A comprehensive study of stability in an electro-statically actuated micro-beam, International Journal of Non-Linear Mechanics, 48, 2013, 78-85.
[44] Rao, S.S., Vibration of Continuous Systems, John Wiely & Sons, New Jersy, 2007.
[45] Vakili-Tahami, F., Mobki, H., Keyvani-Janbahan, A-A., Rezazadeh, G., Pull-in phenomena and dynamic response of a capacitive nano-beam switch, Sensors & Transducers, 110(11), 2009, 26-37.
[46] Hagan, M.T., Demuth, H.B., Beale, M., Neural network design, PWS Publishing Co, USA, 1997.
[47] Azimloo, H., Rezazadeh, G., Shabani, R., Sheikhlou, M., Bifurcation analysis of an electro-statically actuated micro-beam in the presence of centrifugal forces, International Journal of Non-Linear Mechanics, 67, 2014, 7-15.
[48] Rokni, H., Seethaler, R.J., Milani, A.S., Hosseini-Hashemi, S., Li, X.F., Analytical closed-form solutions for size-dependent static pull-in behavior in electrostatic micro-actuators via Fredholm integral equation, Sensors and Actuators A: Physical, 190, 2013, 32-43.
[49] Haluzan, D.T., Klymyshyn, D.M., Achenbach, S., Börner, M., Reducing pull-in voltage by adjusting gap shape in electrostatically actuated cantilever and fixed-fixed beams, Micromachines, 1(2), 2010, 68-81.
[50] Sadeghian, H., Rezazadeh, G., Osterberg, P.M., Application of the generalized differential quadrature method to the study of pull-in phenomena of MEMS switches, Journal of Microelectromechanical Systems, 16(6), 2007, 1334-1340.
[51] Rezazadeh, G., Tahmasebi, A., Zubstov, M., Application of piezoelectric layers in electrostatic MEM actuators: controlling of pull-in voltage, Microsystem Technologies, 12(12), 2006, 1163-1170.