Login Register Cart 0
Generic placeholder image

Nanoscience & Nanotechnology-Asia

Editor-in-Chief

ISSN (Print): 2210-6812
ISSN (Online): 2210-6820

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Research Article

Synthesis of Multi-walled Carbon Nanotubes Decorated with ZnO/Ag Nanoparticles by Co-precipitation Method

Author(s): Duha S. Ahmed, Mohammad R. Mohammed and Mustafa K.A. Mohammed*

Volume 10, Issue 2, 2020

Page: [127 - 133] Pages: 7

DOI: 10.2174/2210681208666181005145644

Price: $65

Abstract

Background: This research indicated that such abstract are more informative and more readable, in field of preparation of nanocomposite materials.

Aim: The purpose of this work represented by decoration of Carbon Nanotubes (CNTs) with nanoparticles using co-precipitation method and exhibit different physical properties from those of CNTs alone and its appropriate for this particular journal.

Methods: Preparation MWCNTs surface by Ag/ZnO nanoparticles using two steps represented by acid treatment of MWCNTs in a mixture acid of sulfuric acid (95% H2SO4) and nitric acid (65% HNO3) at 3:1 ratio and second step represented by decoration of Ag/ZnO nanoparticles on FMWCNTs using co-precipitation method to prepare ZnO/Ag nanoparticles decorated on F-MWCNTs as nanocomposite material.

Results: The results of this work reveal the decoration of Ag-doped ZnO nanoparticles on the FMWCNTs was achieved without any impurities as shown in XRD, Raman spectra and FTIR and FESEM observations reveal that Ag-doped ZnO nanoparticles have spherical morphologies and adhered on the functionalized MWCNTs, with diameters are about 22-30 nm. Also it is clear that there were no any other materials on the surface of F-MWCNTs except ZnO and Ag which verifies the results obtained from XRD and EDS analysis.

Conclusion: In this article, Ag-doped ZnO nanoparticles have been successfully decorated on to modified MWCNTs by an in-situ co-precipitation method. From XRD results, it can be seen that the (002) peak of MWCNTs slightly increased after the addition of Ag-doped ZnO nanoparticles. Raman spectra and FTIR analysis confirmed the formation of Zn-C or Zn-O-C bonds between acid-treated MWCNTs and Ag-doped zinc oxide. The FESEM and EDS analysis revealed that the decoration of Ag-doped ZnO nanoparticles on the F-MWCNTs was achieved without any impurities. Finally, the small sizes Agdoped ZnO NPs deposited on F-MWCNTs make it very promising for biomedicine applications.

Keywords: Multi-walled Carbon Nanotubes (MWCNTs), Single-Walled Carbon Nanotubes (SWCNTs), ZnO/Ag nanoparticles, co-precipitation method, chemical modification, nanomaterials.

Graphical Abstract

[1]
Kang, X.; Haifei, Z.; Yunatong, G. Graphene and carbon hybrid structure: A review. Proc. IUTAM, 2017, 21, pp. 94-101.
[2]
Shivani, D.; Kapil, S.; Neena, J. Effect of highly dispersed sputtered silver nanoparticles on structural properties of multiwalled carbon nanotubes. Mater. Sci. Semicond. Process., 2016, 41, 109-113.
[3]
Samadi, M.; Shivaee, H.A.; Zanetti, M. Pourjavadi, A.; Moshfegh, A. Visible light photocatalytic activity of novel MWCNT-doped ZnO electrospun nanofibers. J. Mol. Catal. A Chem, 2012, 359, 42-48.
[4]
Azam, K.; Jesper, E.; Omer, N.; Magnus, W. A novel investigation on carbon nanotube/ZnO, Ag/ZnO and Ag/carbon nanotube/ZnO nanowires junctions for harvesting piezoelectric potential on textile. J. Appl. Phys., 2014, 116 034505
[5]
Xiaobo, C.; Yu, T.; Weiwei, L. Efficient dye-sensitized solar cells based on nanoflower-like ZnO photoelectrode. Molecules, 2017, 22, 1-6.
[6]
Marina, D.; Alexandr, L.; Jiri, S.; Alexander, K.; Neda, N.; Josef, N.; Jiri, K.; Jan, D.; Jan, V. Gas-sensing behaviour of ZnO/diamond nanostructures. Beilstein J. Nanotechnol., 2018, 9, 22-29.
[7]
Nannan, L.; Xiaozhao, L.; Baoqing, Z. Field emission and emission-stimulated desorption of ZnO nanomaterials. Appl. Sci., 2018, 8, 1-8.
[8]
Farzaneh, H.; Alibakhsh, K.; Fathollah, P.; Mojgan, S.; Dongsheng, W. Novel ZnO-Ag/MWCNT nanocomposite for the photocatalytic degradation of phenol. Mater. Sci. Semicond. Process., 2018, 83, 175-185.
[9]
Pawel, S.; Adrian, A.; Krzysztof, C.; Paweł, N.; Ewa, M. Antimicrobial activity of Al2O3, CuO, Fe3O4, and ZnO nanoparticles in scope of their further application in cement-based building materials. Nanomaterials, 2018, 8, 1-15.
[10]
Nirupam, A.; Jaime, P-T.; Jamie, R.L.; Navid, B.S. A critical review of nanohybrids: Synthesis, applications and environmental implications. Environ. Chem., 2014, 11, 609-623.
[11]
Sutanto, H.; Wibowo, S.; Nurhasanah, I.; Hidayanto, E. Optical and microstructure of thin film of Ag-doped ZnO synthesized by sol-gel. Adv. Sci. Technol. Soci., 2016, 1755 150001
[12]
Krstulović, N.; Salamon, K.; Budimlija, O.; Kovač, J.; Dasović, J.; Umek, P.; Capan, I. Parameters optimization for synthesis of Al-doped ZnO nanoparticles by laser ablation in water. Appl. Surf. Sci., 2018, 440, 916-925.
[13]
Yang, W.; Wang, J.; Luo, S.; Yu, S.; Huang, H.; Sun, R.; Wong, C-P. ZnO-decorated carbon nanotube hybrids as fillers leading to reversible nonlinear I-V behavior of polymer composites for device protection. ACS Appl. Mater. Interfaces, 2016, 8, 35545-35551.
[14]
Mohamed, M.; Magdy, H.; Mohamed, E.; Medhat, I. Preparation and characterization of multiwall carbon nanotubes decorated with zinc oxide. Der. Pharm. Chem., 2015, 7, 139-144.
[15]
Ngo, X.D.; Nguyen, V.Q.; Tran, Q. Huy, Anh-Tua, L. Decoration of silver nanoparticles on multi walled carbon nanotubes: Antibacterial mechanism and ultrastructural analysis. J. Nanomater., 2015, 2015, 1-11.
[16]
Ahmed, M.K.; Falah, H.H.; Ahmed, F.H.; Detlef, W.B. Preparation, characterization, and photocatalytic applications of MWCNTs/TiO2 composite. Int. J. Photoenergy, 2014, 2014, 1-8.
[17]
Suriani, A.; Suhufa, A.; Azmi, M.; Norhayati, H. The synthesis of zinc oxide/carbon sheres nanocomposites and field electron emission properties. Malays. J. Anal. Sci., 2017, 21, 323-333.
[18]
Sekineh, H.L.; Mohammad, A.P. The effect of concentration ratio and type of functional group on synthesis of CNT-ZnO hybrid nanomaterial by an in situ sol-gel process. Int. Nano Lett., 2017, 7, 25-33.
[19]
Saleh, T.A.; Gondal, M.A.; Drmosh, Q.A.; Yamani, Z.H. Al- Yamani, A. Enhancement in photocatalytic activity for acetaldehyde removal by embedding ZnO nanoparticles on multiwall carbon nanotubes. Chem. Eng. J., 2011, 166, 407-412.

Rights & Permissions Print Cite
Article Metrics
12
1
© 2024 Bentham Science Publishers | Privacy Policy