Elastic Moduli of Ultem and Noryl at Cryogenic Temperatures Using Vibrating Beam Specimens
- Brookhaven National Lab. (BNL), Upton, NY (United States)
Two materials are being evaluated for use in the injection-molded composite posts for the RHIC magnets. They are Ultem 2100 and SE1GFN3 Noryl. Both are themoplastics reinforced with fiberglass chop. Ultem 2100 is composed of 10% fiberglass by weight and GFN3 Noryl is 30% fiberglass. These materials are of interest because they have low thermal conductivity, high strength and low material and fabrication cost.
- Research Organization:
- Brookhaven National Lab. (BNL), Upton, NY (United States)
- Sponsoring Organization:
- USDOE Office of Science (SC)
- DOE Contract Number:
- AC02-98CH10886
- OSTI ID:
- 1119145
- Report Number(s):
- BNL-101803-2013-IR
- Country of Publication:
- United States
- Language:
- English
Similar Records
Alternative concepts for structurally supporting the cold mass of a superconducting accelerator magnet
Compression and Creep Tests on Injection Molded Composite Posts
Tensile Tests for Quality Control of Injection Molded Composite Posts
Conference
·
Fri Mar 01 00:00:00 EST 1991
·
OSTI ID:1119145
Compression and Creep Tests on Injection Molded Composite Posts
Technical Report
·
Wed Aug 01 00:00:00 EDT 1990
·
OSTI ID:1119145
Tensile Tests for Quality Control of Injection Molded Composite Posts
Technical Report
·
Wed Aug 01 00:00:00 EDT 1990
·
OSTI ID:1119145