27Mar 2017

EFFECT OF CRYOGENIC TREATMENT ON TOOL STEELS.

  • Department of Mechanical Engineering, Symbiosis Institute of Technology, Pune-41215, Maharashtra, India.
  • Department of Industrial Engineering and Management, Dr. Ambedkar Institute of Technology, Bangalore-560056, Karnataka, India.
  • Department of Mechanical and Manufacturing Engineering, M.S. Ramaiah University of applied Sciences, Bangalore-56058,Karnataka, India.
  • Department of Mechanical Engineering, Symbiosis Institute of Technology, Pune-41215, Maharashtra, India
Crossref Cited-by Linking logo
  • Abstract
  • Keywords
  • References
  • Cite This Article as
  • Corresponding Author

The objective of this review is to understand the effect of cryogenic treatment on tool life and its performance. As cutting tool life is an important factor in reducing the cost of production. In this process of cryogenic treatment, tools are generally subjected to the process such as heat treatment for achieving the hardness which will improve the performance of the tool to some extent. Cryogenic treatment also known as cold treatment, in which the phase transformation of the material takes place, is mainly responsible for changes in the wear resistance, tensile strength, toughness etc. which increases the tool life. From the review it was understood that has great effect on cutting tool properties. Especially soaking period varied from 6 hours to 36 hours are giving different effect on the phase transformation of the material, consider as one of the important aspect for tool life improvement. Various soaking range namely shallow cryogenic treatment (SCT), Cryogenic treatment (CT) and deep cryogenic treatment (DCT) produce different properties in tool material. This treatment or process can be very useful in case of machinability of work-piece, quality of machining in terms of surface finish and economics of the tooling.

  1. Amini K, Akhbarizadeh A, Javadpour s.Effect of deep cryogenic treatment on the formation of nano-sized carbides and the wear behavior of D2 tool steel.International Journal of Minerals, Metallurgy and Materials, 19(9). Pp 795.
  2. Baldissera P, Delprete C. Deep cryogenic treatment of AISI 302 stainless steel: Part II ? Fatigue and corrosion. Materials and Design,2010. Pp 4731-4737.
  3. Gu, K, wang, J, Zhou Y. Effect of cryogenic treatment on wear resistance of Ti?6Al?4V alloy for biomedical applications. Journal of Mechanical Behavior of Biomedical Materials. Pp. 131-139.
  4. Amini K, Akhbarizadeh A, Javadpour s.Effect of deep cryogenic treatment on the formation of nano-sized carbides and the wear behavior of D2 tool steel.International Journal of Minerals, Metallurgy and Materials, 19(9). Pp 795.
  5. Akincioglu, S, Gokkaya H, and Uygur I. A review of cryogenic treatment on cutting tools.International Journal of Advanced Manufacturing Technology. pp. 1609?1627.
  6. Bensely A, Senthilkumar D, Mohan L D. Effect of cryogenic treatment on tensile behavior of case carburized steel-815M17. Materials Characterization,2007.Pp 485?491.
  7. Gu, K, wang, J, Zhou Y. Effect of cryogenic treatment on wear resistance of Ti?6Al?4V alloy for biomedical applications. Journal of Mechanical Behavior of Biomedical Materials. Pp. 131-139.
  8. Candane D, Alagumurthi N, Palaniradja K.Tribological studies on deep cryogenic treated AISI t42 high speed steel using response surface methodology. Advances in Materials, 2(2).2013. Pp 12-22.
  9. Firouzdor V, Nejati E, Khomamizadeh F. Effect of deep cryogenic treatment on wear resistance and tool life of M2 HSS drill. Journal of materials processing technology, 2008. Pp 467?472.
  10. Dhokey N B, Nirbhavne S. Dry sliding wear of cryotreated multiple tempered D-3 tool steel.Journal of materials processing technology, 2009. Pp1484?1490.
  11. Bensely A, Senthilkumar D, Mohan L D. Effect of cryogenic treatment on tensile behavior of case carburized steel-815M17. Materials Characterization,2007.Pp 485?491.
  12. Dhasa, M L, Renganarayanan S, Kalanidhi A. Cryogenic-treatment-to-augment-wear-resistance-of-tool-and-die-steels. Cryogenics,2001. Pp.149-155.
  13. Das D, Ray K.On the mechanism of wear resistance enhancement of tool steels by deep cryogenic treatment.Philosophical Magazine Letters, 92(6). 2012.Pp 295?303.
  14. Tyshchenko A I, Theisen W, Oppenkowski A. Low-temperature martensitic transformation and deep cryogenic treatment of a tool steel.Materials Science and Engineering,2010. Pp 7027?7039.
  15. Jaswin M A, Gobi S S, Dhasan M L.Wear Resistance Enhancement in Cryotreated En 52 and 21-4N Valve Steels.International journal of precision engineering and manufacturing, 11(1).2010. Pp 97-105.
  16. Straffelini G, Bizzottob G, Zanonb V. Improving the wear resistance of tools for stamping. Wear,269. 2010. Pp 693?697.
  17. Jaswin, M A, Dhasan M. Optimization of the Cryogenic Treatment Process for En 52 Valve Steel Using the Grey-Taguchi Method.Materials and Manufacturing Processes,2010. Pp 842?850.
  18. Sonar T M, Lomte S V. Effect of deep cryogenic treatment on surface integrity and dimensional stability of D2 tool steel. International Journal of Research in Engineering and Technology. Pp 2321-7308.
  19. Gill S S, Singh J, Singh R, Singh H. Metallurgical principles of cryogenically treated tool steels?a review on the current state of science.International Journal of Advanced Manufacturing Technology, 2010. Pp 59?82.
  20. Wale A D,Wakchaure V D. Effect of Cryogenic Treatment on Mechanical Properties of Cold Work Tool Steels. International Journal of Modern Engineering Research. 2013. Pp 149-154.
  21. Huang J Y, Zhu Y T, Liao X Z. Microstructure of cryogenic treated M2 tool steel.Materials Science and Engineering,2003.Pp 241-244.
  22. Das D, Dutta A K, Toppo V,Ray K K, Effect of Deep Cryogenic Treatment on the Carbide Precipitation and Tribological Behavior of D2 Steel.Materials and Manufacturing Processes,22. 2007. Pp 474?480.
  23. Das D, Dutta A K, Ray K K. Influence of varied cryotreatment on the wear behavior of AISI D2 steel. Wear, 266.2008. Pp297?309.
  24. Das D, Dutta A K, Ray K K. On the enhancement of wear resistance of tool steels by cryogenic treatment. Philosophical Magazine Letters, 88(11). 2008.Pp 801?811.
  25. Ather S, Sonawane S A.Wear Resistance Enhancement of AISI D3 Tool Steels by Cryogenic Treatment.International Journal of Current Engineering and Technology, 5(3). 2015.Pp1777-1780.
  26. Lohith M, Sondur V B, Sondur V V.The Effect of Cryogenic Treatment on the Hardness, Friction and Wear Resistance of Austenitic Ductile Iron Type D3 Tool Steel. International Journal of Modern Engineering Research, 4(7). 2014. Pp 24-29.

[Satish Kumar, N. Mohan, Suresh. R and Nitin K Khedkar. (2017); EFFECT OF CRYOGENIC TREATMENT ON TOOL STEELS. Int. J. of Adv. Res. 5 (Mar). 1035-1045] (ISSN 2320-5407). www.journalijar.com

Dr Mohan
Dr.Ambedkar Institute of Technology, Bangalore-560056, Karnataka, India

DOI:

Article DOI: 10.21474/IJAR01/3602      
DOI URL: http://dx.doi.org/10.21474/IJAR01/3602

Download Full Paper

Download PDF No. of Downloads: 37 | No. of Views: 153