Research Article
BibTex RIS Cite

ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ

Year 2018, Volume: 28 Issue: 3, 365 - 370, 11.07.2018
https://doi.org/10.17567/ataunidfd.473285

Abstract







Amaç: Estetik
restoratif CAD/CAM kompoziti (Lava Ulti- mate; 3M ESPE, St.Paul, ABD) ve hibrit
seramik materya- linin (Vita Enamic, Vita Zahnfabrik, Almanya) translüsensi ve
renk stabilitesi hakkında yeterli bilgi bulunmamaktadır. Bu çalışmanın amacı,
restorative CAD/CAM materyallerinin translüsensi ve renk stabilitesini
araştırmaktır.




Gereç ve Yöntem: Onar örnekten oluşan
dört grup, 1 mm kalınlığında hibrit seramik ve rezin nanoseramik kompozit rezin
monolitik bloklardan hazırlandı. Test edilen tüm materyaller için 2M2, yüksek
translüsensili bloklar seçildi. Yüzey bitirmelerinde Lava Ultimate

örnekler
için Sof-Lex (3M ESPE, St.Paul, ABD)
diskler, Vita Enamic için Vita Enamic polishing set (Vita Enamic, Vita
Zahnfabrik, Almanya) kullanıldı. Örneklerin her iki yüzüne de polisaj
uygulandı. Translüsensi parametresi ve renk farklılıkları, örnekler 48 saat
kahve solüsyonunda bekletilmeden önce ve sonrasında CIE L*a*b* sisteminde
spektrofotometre (Vita Easy Shade, Vita Zahnfabrik, Almanya) ile ölçüldü.
Veriler Mann-Whitney U testi ile incelendi (p<.05).




Bulgular: Lava ve Vita Enamic kontrol grupları
arasında anlamlı fark görülmedi (p=1). Kahve solüsyonunda bekletilme sonrasında
CAD/CAM materyallerin translüsensi parametresi değerleri azalırken ∆E renk
farklılıklarında artış gözlendi. Kahvede bekletilme
sonrasında Lava Ultimate
(10.9±1), Vita
Enamic’den
(9.1±0.7) daha yüksek translüsensi parametresi değeri
sergiledi. Ayrıca kahvede bekletilen Lava
Ultimate örneklerin ∆E değeri (∆E=3.4) Vita Enamic’den (∆E=1.8) daha fazla ve
eşik değerin (∆E=2.7) üstünde ölçüldü.



Sonuç: Çalışmamızda Lava Ultimate daha yüksek
translü- sensi değeri sergiledi ancak daha fazla renk değişimi gösterdi.



Anahtar Kelimeler: Translüsensi, Renk Stabilitesi, CAD/CAM

EVALUATION OF TRANSLUCENCY AND COLOR STABILITY OF
ESTHETIC CAD/CAM RESTORATIVE MATERIALS



ABSTRACT



Aim: Adequately information is not available about the translucency
and color stability of esthetic restorative CAD/CAM composite (LAVA Ultimate,
3M ESPE, StPaul, USA) and hybrid ceramic material (VITA Enamic, Vita
Zahnfabrik, Germany). The purpose of this study was to investigate the
translucency and color stability of restorative CAD/CAM materials.



Material and Methods: Four groups consist of 10
specimens, were prepared with 1 mm thickness of hybrid ceramic
and resin
nano ceramic
composite resin monolithic blocks. 2M2 high translucent blocks
were chosen for all tested materials. 
Surface finishing was performed with Sof-Lex (3M ESPE, StPaul, USA)
discs for Lava Ultimate specimens and Vita Enamic polishing set (VITA Enamic,
Vita Zahnfabrik, Germany) was used for Vita Enamic. The polishing procedures
were performed on both sides of the specimens. Translucency parameter and color
differences were measured in the CIE L*a*b* system by spectrophotometer (Vita
Easy Shade, Vita Zahnfabrik, Germany) before and after 48 hours of immersion in
a coffee solution. Data were analyzed with Mann-Whitney U test (p<.05).



Results: There was no significant difference between the Lava control
group and Vita Enamic control group (p=1). After immersion of coffee solution,
translucency parameter values of CAD/CAM materials were decreased and increased
∆E color differences were observed. 
Significant differences were found among coffee groups for all specimens
tested (p<.001). After coffee immersion, Lava Ultimate showed higher
translucency parameter value (10.9±1) than Vita Enamic (9.1±0.7). Also, ∆E
values of Lava Ultimate (∆E=3.4) specimens which stored in coffee solution were
higher than Vita Enamic (∆E=1.8), and were over than threshold ∆E (∆E=2.7).



Conclusion: Lava Ultimate showed more translucency
parameter value, but also showed more staining in our study.



Keywords: Translucency;
Color Stability; CAD/CAM

References

  • 1. Barutcigil Ç, Harorlı OT, Yıldız M, Özcan E, Arslan H, Bayındır F. The color differences of direct esthetic restorative materials after setting and compared with a shade guide. JADA 2011;142:658-65.
  • 2. Doğan A, Yüzügüllü B. Renk seçiminde güncel teknolojik gelişmeler [Recent technological developments in color selection]. Atatürk Üniv. Diş Hek. Fak. Derg. 2011;4:65-72.
  • 3. Shillingburg HT, Hobo S, Whitsett LD, Brackett SE. Fundamentals of Fixed Prosthodontics. 3rd ed. Londra; Quintessence Publishing Co Inc:2010. p. 433.
  • 4. Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater 2013;29:419-26.
  • 5. Seghi R, Johnston W, O'Brien W. Performance assessment of colorimetric devices on dental porcelains. J Dent Res 1989;68:1755-9.
  • 6. Heydecke G, Zhang F, Razzoog ME. In vitro color stability of double-layer veneers after accelerated aging. J Prosthet Dent 2001;85:551-7.
  • 7. Barizon KT, Bergeron C, Vargas MA, Qian F, Cobb DS, Gratton DG et al. Ceramic materials for porcelain veneers. Part I: Correlation between translucency parameters and contrast ratio. J Prosthet Dent 2013;110:397-401.
  • 8. Commission Internationale de l’Eclairage (CIE). CIE technical report: colorimetry. [CIE Pub No.15.3]. 2004.
  • 9. Joiner A. Tooth colour: A review of the literature. J Dent, 2004;32:3-12.
  • 10. Powers JM, Sakaguchi RL. Optical, thermal, and electrical properties, In: Craig’s Restorative Dental Materials, 12 Ed, Missouri; Mosby:2006. p.28-50.
  • 11. Güler AU, Güler E, Yücel AÇ, Ertaş E. Effects of polishing procedures on color stability of composite resins. J Appl Oral Sci. 2009;17:108-12.
  • 12. Ragain JC, Johnston WM. Minimum color differences for discriminating mismatch between composite and tooth color. J Esthet Restor Dent 2001;13:41-8.
  • 13. Johnston W, Kao E. Assessment of appearance match by visual observation and clinical colorimetry. J Dent Res 1989;68:819-22.
  • 14. O'Brien WJ. Dental materials and their selection. 3rd Ed. Chicago; Quintessence Publishing Co Inc: 2008. p. 24-36.
  • 15. Douglas RD, Brewer JD. Acceptability of shade differences in metal ceramic crowns. J Prosthet Dent 1998;79:254-60.
  • 16. Ishikawa-Nagai S, Yoshida A, Sakai M, Kristiansen J, Da Silva JD. Clinical evaluation of perceptibility of color differences between natural teeth and all-ceramic crowns. J Dent 2009;37:57-63.
  • 17. Vichi A, Louca C, Corciolani G, Ferrari M. Color related to ceramic and zirconia restorations: A review. Dent Mater 2011;27:97-108.
  • 18. Acar O, Yılmaz B, Altıntas SH, Chandrasekaran I, Johnston WM. Color stainability of CAD/CAM and nanocomposite resin materials. J Prosthet Dent 2016;115:71-5.
  • 19. Bagheri R, Burrow MF, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent 2005;33:389-98.
  • 20. Della Bona A, Corazza PH, Zhang Y. Characterization of a polymer-infiltrated ceramic-network material. Dent Mater 2014;30:564-9.
  • 21. Koller M, Arnetzl GV, Holly L, Arnetzl G. Lava ultimate resin nano ceramic for CAD/ CAM: Customization case study. Int J Comput Dent 2012;15:159-64.
  • 22. Mainjot A, Dupont N, Oudkerk J, Dewael T, Sadoun M. From Artisanal to CAD-CAM Blocks State of the Art of Indirect Composites. J Dent Res 2016;95:487-95.
  • 23. Belli R, Geinzer E, Muschweck A, Petschelt A, Lohbauer U. Mechanical fatigue degradation of ceramics versus resin composites for dental restorations. Dent Mater 2014;30:424-32. 24. Vasudeva G. Monomer systems for dental composites and their future: a rewiev. J Calif Dent Assoc 2009;37:389-98.
  • 25. Gajewski VE, Pfeifer CS, Froes-Salgado NR, Boaro LC, Braga RR. Monomers used in resin composites: degree of conversion, mechanical properties and water sorption/solubility. Braz Dent J 2012;23:508-14.
  • 26. Stawarczyk B, Sener B, Trottmann A, Roos M, Ozcan M, Hammerle CH. Discoloration of manually fabricated resins and industrially fabricated CAD/ CAM blocks versus glass-ceramic: effect of storage media, duration, and subsequent polishing. Dent Mater J 2012;31:377-83.
  • 27. Van Noort R. Introduction to dental materials. 4th Edition: Elsevier Inc. Mosby Ltd; 2013. p. 231-46.
  • 28. Awad D, Stawarczyk B, Liebermann A, Ilie N. Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness. J Prosthet Dent 2015;113:534-40.
  • 29. Arocha MA, Basilio J, Llopis J, Bella ED, Roig M, Ardu S, Mayoral JR. Colour stainability of indirect CAD–CAM processed composites vs. conventionally laboratory processed composites after immersion in staining solutions. J Dent 2014;42:831–8 . 30. Pop-Ciutrila IS, Dudea D, Eugenia BM, Moldovan M, Cîmpean SI, Ghinea R. shade correspondence, color, and translucency differences between human dentine and a CAD/CAM Hybrid ceramic system. J Esthet Restor Dent 2016;28:46-55.
  • 31. Gouveia THN, Publio JC, Ambrosano GMB, Paulillo LA, Aguiar FH, Lim DA. Effect of bleaching on physical properties of a composite resin. Eur J Dent 2016;10:82-91.
Year 2018, Volume: 28 Issue: 3, 365 - 370, 11.07.2018
https://doi.org/10.17567/ataunidfd.473285

Abstract

References

  • 1. Barutcigil Ç, Harorlı OT, Yıldız M, Özcan E, Arslan H, Bayındır F. The color differences of direct esthetic restorative materials after setting and compared with a shade guide. JADA 2011;142:658-65.
  • 2. Doğan A, Yüzügüllü B. Renk seçiminde güncel teknolojik gelişmeler [Recent technological developments in color selection]. Atatürk Üniv. Diş Hek. Fak. Derg. 2011;4:65-72.
  • 3. Shillingburg HT, Hobo S, Whitsett LD, Brackett SE. Fundamentals of Fixed Prosthodontics. 3rd ed. Londra; Quintessence Publishing Co Inc:2010. p. 433.
  • 4. Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater 2013;29:419-26.
  • 5. Seghi R, Johnston W, O'Brien W. Performance assessment of colorimetric devices on dental porcelains. J Dent Res 1989;68:1755-9.
  • 6. Heydecke G, Zhang F, Razzoog ME. In vitro color stability of double-layer veneers after accelerated aging. J Prosthet Dent 2001;85:551-7.
  • 7. Barizon KT, Bergeron C, Vargas MA, Qian F, Cobb DS, Gratton DG et al. Ceramic materials for porcelain veneers. Part I: Correlation between translucency parameters and contrast ratio. J Prosthet Dent 2013;110:397-401.
  • 8. Commission Internationale de l’Eclairage (CIE). CIE technical report: colorimetry. [CIE Pub No.15.3]. 2004.
  • 9. Joiner A. Tooth colour: A review of the literature. J Dent, 2004;32:3-12.
  • 10. Powers JM, Sakaguchi RL. Optical, thermal, and electrical properties, In: Craig’s Restorative Dental Materials, 12 Ed, Missouri; Mosby:2006. p.28-50.
  • 11. Güler AU, Güler E, Yücel AÇ, Ertaş E. Effects of polishing procedures on color stability of composite resins. J Appl Oral Sci. 2009;17:108-12.
  • 12. Ragain JC, Johnston WM. Minimum color differences for discriminating mismatch between composite and tooth color. J Esthet Restor Dent 2001;13:41-8.
  • 13. Johnston W, Kao E. Assessment of appearance match by visual observation and clinical colorimetry. J Dent Res 1989;68:819-22.
  • 14. O'Brien WJ. Dental materials and their selection. 3rd Ed. Chicago; Quintessence Publishing Co Inc: 2008. p. 24-36.
  • 15. Douglas RD, Brewer JD. Acceptability of shade differences in metal ceramic crowns. J Prosthet Dent 1998;79:254-60.
  • 16. Ishikawa-Nagai S, Yoshida A, Sakai M, Kristiansen J, Da Silva JD. Clinical evaluation of perceptibility of color differences between natural teeth and all-ceramic crowns. J Dent 2009;37:57-63.
  • 17. Vichi A, Louca C, Corciolani G, Ferrari M. Color related to ceramic and zirconia restorations: A review. Dent Mater 2011;27:97-108.
  • 18. Acar O, Yılmaz B, Altıntas SH, Chandrasekaran I, Johnston WM. Color stainability of CAD/CAM and nanocomposite resin materials. J Prosthet Dent 2016;115:71-5.
  • 19. Bagheri R, Burrow MF, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent 2005;33:389-98.
  • 20. Della Bona A, Corazza PH, Zhang Y. Characterization of a polymer-infiltrated ceramic-network material. Dent Mater 2014;30:564-9.
  • 21. Koller M, Arnetzl GV, Holly L, Arnetzl G. Lava ultimate resin nano ceramic for CAD/ CAM: Customization case study. Int J Comput Dent 2012;15:159-64.
  • 22. Mainjot A, Dupont N, Oudkerk J, Dewael T, Sadoun M. From Artisanal to CAD-CAM Blocks State of the Art of Indirect Composites. J Dent Res 2016;95:487-95.
  • 23. Belli R, Geinzer E, Muschweck A, Petschelt A, Lohbauer U. Mechanical fatigue degradation of ceramics versus resin composites for dental restorations. Dent Mater 2014;30:424-32. 24. Vasudeva G. Monomer systems for dental composites and their future: a rewiev. J Calif Dent Assoc 2009;37:389-98.
  • 25. Gajewski VE, Pfeifer CS, Froes-Salgado NR, Boaro LC, Braga RR. Monomers used in resin composites: degree of conversion, mechanical properties and water sorption/solubility. Braz Dent J 2012;23:508-14.
  • 26. Stawarczyk B, Sener B, Trottmann A, Roos M, Ozcan M, Hammerle CH. Discoloration of manually fabricated resins and industrially fabricated CAD/ CAM blocks versus glass-ceramic: effect of storage media, duration, and subsequent polishing. Dent Mater J 2012;31:377-83.
  • 27. Van Noort R. Introduction to dental materials. 4th Edition: Elsevier Inc. Mosby Ltd; 2013. p. 231-46.
  • 28. Awad D, Stawarczyk B, Liebermann A, Ilie N. Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness. J Prosthet Dent 2015;113:534-40.
  • 29. Arocha MA, Basilio J, Llopis J, Bella ED, Roig M, Ardu S, Mayoral JR. Colour stainability of indirect CAD–CAM processed composites vs. conventionally laboratory processed composites after immersion in staining solutions. J Dent 2014;42:831–8 . 30. Pop-Ciutrila IS, Dudea D, Eugenia BM, Moldovan M, Cîmpean SI, Ghinea R. shade correspondence, color, and translucency differences between human dentine and a CAD/CAM Hybrid ceramic system. J Esthet Restor Dent 2016;28:46-55.
  • 31. Gouveia THN, Publio JC, Ambrosano GMB, Paulillo LA, Aguiar FH, Lim DA. Effect of bleaching on physical properties of a composite resin. Eur J Dent 2016;10:82-91.
There are 29 citations in total.

Details

Primary Language Turkish
Subjects Health Care Administration
Journal Section Araştırma Makalesi
Authors

İşıl Sarıkaya 0000-0002-2172-4724

Ceyda Güleç This is me 0000-0002-8973-1920

Publication Date July 11, 2018
Published in Issue Year 2018 Volume: 28 Issue: 3

Cite

APA Sarıkaya, İ., & Güleç, C. (2018). ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, 28(3), 365-370. https://doi.org/10.17567/ataunidfd.473285
AMA Sarıkaya İ, Güleç C. ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ. Ata Diş Hek Fak Derg. July 2018;28(3):365-370. doi:10.17567/ataunidfd.473285
Chicago Sarıkaya, İşıl, and Ceyda Güleç. “ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 28, no. 3 (July 2018): 365-70. https://doi.org/10.17567/ataunidfd.473285.
EndNote Sarıkaya İ, Güleç C (July 1, 2018) ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 28 3 365–370.
IEEE İ. Sarıkaya and C. Güleç, “ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ”, Ata Diş Hek Fak Derg, vol. 28, no. 3, pp. 365–370, 2018, doi: 10.17567/ataunidfd.473285.
ISNAD Sarıkaya, İşıl - Güleç, Ceyda. “ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 28/3 (July 2018), 365-370. https://doi.org/10.17567/ataunidfd.473285.
JAMA Sarıkaya İ, Güleç C. ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ. Ata Diş Hek Fak Derg. 2018;28:365–370.
MLA Sarıkaya, İşıl and Ceyda Güleç. “ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, vol. 28, no. 3, 2018, pp. 365-70, doi:10.17567/ataunidfd.473285.
Vancouver Sarıkaya İ, Güleç C. ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ. Ata Diş Hek Fak Derg. 2018;28(3):365-70.

Bu eser Creative Commons Alıntı-GayriTicari-Türetilemez 4.0 Uluslararası Lisansı ile lisanslanmıştır. Tıklayınız.