Indian Journal of Science and Technology
DOI: 10.17485/ijst/2017/v10i15/113825
Year: 2017, Volume: 10, Issue: 15, Pages: 1-9
Original Article
Siva Sankara Raju1*, Ajit Ku. Senapathi1 and Gunji Srinivas Rao2
1Faculty of Mechanical Engineering, Gandhi Group of Institutions (GIET), Gunupur – 765022, Odisha, India; [email protected] 2Faculty of Mechanical Engineering, RVR and JC, Guntur – 522019, Andhra Pradesh, India
*Author for correspondence
Siva Sankara Raju
Faculty of Mechanical Engineering, Gandhi Group of Institutions (GIET), Gunupur – 765022, Odisha, India; [email protected]
Objectives: To prepare Aluminium Metal matrix Composite (AMC) reinforced with treated fly ash (TFA) and untreated fly ash (UFA) by stir casting route with percentage of volume ≈ 15%. Methods/Statistical Analysis: Fly ash particulates are treated in plasma reactor; Al-TFA composite has been compared with Al-UFA and Al-Si alloy. The experiments are designed based on response surface methodology (RSM). In this study, sliding time, sliding distance and load as input parameters whereas weight loss (g) and coefficient of friction (COF) are response. Moreover, multi- outputs are convinced into a single outcome by grey relational analysis (GRA) to avoid uncertainty in decision making. Findings: X-ray studies corroborate the presence of SiC in TFA. Mechanical (i.e. Hardness, Tensile and Impact strength) and Physical (i.e. density) properties of Al-TFA composite exhibited better than Al-UFA and Base matrix. From the ANOVA of TFA notify that load is the most affecting factor followed sliding time and combined effect of sliding velocity and load on grey relational grade (GRG). The obtained optimal condition is T1 V2 L2 (i.e. sliding time (1000see), velocity (2m/s) and Load (30N)). The optimum value of weight loss and coefficient of friction (COF) are 0.019 grams and 0.168 respectively. Finally, confirmation test is conducted to validate the regression equation and the worn-out surfaces are examined by Scanning Electron Microscopic (SEM). Application/Improvements: Al-TFA composite exhibited better mechanical and tribological properties than Al-UFA composite.
Keywords: Al-MMCs, ANOVA, Fly Ash, GRA, RSM
Subscribe now for latest articles and news.