Indian Journal of Science and Technology
DOI: 10.17485/ijst/2016/v9i16/70123
Year: 2016, Volume: 9, Issue: 16, Pages: 1-6
Original Article
Ali A. Memon1*, Rameez A. Talani2 and Anwer A. Memon1
1Department of Electrical Engineering, Mehran University of Engineering and Technology, Jamshoro - 76062, Pakistan; [email protected], [email protected] 2Department of Electrical Engineering, Quiad-e-Awam University of Engineering and Technology, Nawabshah - 67450, Pakistan; [email protected]
*Author of Corresponding: Ali A. Memon Department of Electrical Engineering, Mehran University of Engineering and Technology, Jamshoro - 76062, Pakistan; [email protected]
The available experimental data is often not sufficient enough and therefore, an interpolation technique is required to suit the trend of experimental data in simulation model of the switched reluctance machine. The objective of this paper is to present a suitable simulation model of the machine with help of different data interpolation techniques to overcome the missing intermediate data available from the experiments. The input data is obtained from experiments and missing required data is obtained through interpolation methods for range of desired samples. Matlab software is used for the simulation purpose. This methodology of finding best curve fitting technique and missing data points is simple and easy to implement. The findings of this research work are helpful for developing an accurate simulation model and to see the effect of different data interpolation techniques on instantaneous phase current waveforms of switched reluctance machine.
Keywords: Chopping Mode, Data Interpolation, Dual Saliency, Magnetization Characteristics, Polynomial
Subscribe now for latest articles and news.
