Research Article
Year 2019,
Volume: 23 Issue: 5, 964 - 971, 01.10.2019
Abstract
References
- [1] F. Xu, B. Guo, Z. Xu, L. M. Tolbert, F. Wang, and B. J. Blalock, “SiC based current source rectifier paralleling and circulating current suppression,” in 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC), 2013, pp. 402–409.
- [2] H. Yuan and X. Jiang, “A simple active damping method for Active Power Filters,” in Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC, 2016, vol. 2016–May, pp. 907–912.
- [3] J. C. Wiseman and B. Wu, “Active damping control of a high-power PWM current-source rectifier for line-current THD reduction,” IEEE Trans. Ind. Electron., vol. 52, no. 3, pp. 758–764, 2005.
- [4] J. Munoz, M. Sarbanzadeh, E. Sarebanzadeh, M. Rivera, and M. A. Hosseinzadeh, “Predictive Control in Power Converter Applications: Challenge and Trends,” 2019, pp. 1–6.
- [5] S. Vazquez, J. Rodriguez, M. Rivera, L. G. Franquelo, and M. Norambuena, “Model Predictive Control for Power Converters and Drives: Advances and Trends,” IEEE Trans. Ind. Electron., vol. 64, no. 2, pp. 935–947, 2017.
- [6] M. Rivera, P. Wheeler, A. Olloqui, and D. A. Khaburi, “A review of predictive control techniques for matrix converters-Part i,” in 7th Power Electronics, Drive Systems and Technologies Conference, PEDSTC 2016, 2016.
- [7] P. Zavala et al., “Predictive control of a current source rectifier with imposed sinusoidal input currents,” in IECON Proceedings (Industrial Electronics Conference), 2013, pp. 5842–5847.
- [8] M. Rivera, L. Tarisciotti, and P. Wheeler, “Indirect model predictive control with imposed sinusoidal source currents for a Direct Matrix Converter Working at fixed switching frequency,” in Proceedings - 2017 IEEE Southern Power Electronics Conference, SPEC 2017, 2018, vol. 2018–Janua, pp. 1–6.[9] B. Feng and H. Lin, “Finite control set model predictive control of AC/DC matrix converter for grid-connected battery energy storage application,” J. Power Electron., vol. 15, no. 4, pp. 1006–1017, 2015.
- [10] I. Lizama, J. Rodríguez, B. Wu, P. Correa, M. Rivera, and M. Pérez, “Predictive control for current source rectifiers operating at low switching frequency,” in 2009 IEEE 6th International Power Electronics and Motion Control Conference, IPEMC ’09, 2009, pp. 1630–1633.
- [11] P. Correa and J. Rodriguez, “A predictive control scheme for current source rectifiers,” in 2008 13th International Power Electronics and Motion Control Conference, 2008, pp. 699–702.
- [12] H. Gao, B. Wu, D. Xu, and N. R. Zargari, “A Model Predictive Power Factor Control Scheme with Active Damping Function for Current Source Rectifiers,” IEEE Trans. Power Electron., vol. 33, no. 3, pp. 2655–2667, 2018.
- [13] M. Sitterly, L. Y. Wang, G. G. Yin, and C. Wang, “Enhanced identification of battery models for real-time battery management,” IEEE Trans. Sustain. Energy, vol. 2, no. 3, pp. 300–308, 2011.
Year 2019,
Volume: 23 Issue: 5, 964 - 971, 01.10.2019
Abstract
This paper presents an
imposed source current predictive control approach for a current source
rectifier that can be used as battery charger fed from three-phase ac grid. The
proposed MPC technique allows to charge the battery with a constant current or voltage
as what is required for cyclic charge process of batteries. The proposed
technique ensures unity input power factor operation for grid side. The
single-objective cost function of the predictive control employs the error
between supply current reference and supply current prediction and the
switching state that minimizes this cost function is selected among the nine
switching vector combinations of the current source rectifier so as to apply
for next sampling interval. An active damping current term, that is predicted
from the input filter capacitor voltage estimation is included in the cost
function to mitigate the resonance of input LC filter. The supply current
references in phase with grid voltages are generated from grid voltages and the
amplitude of this reference currents are generated from the charging
requirements of the battery. The input filter model is used to predict the
filter capacitor voltages at sampling intervals k and k+1 in order to eliminate
sensor requirement for them. A simulation study is carried out to observe the
proposed method in terms of steady-state and dynamic responses and supply
current quality.
References
- [1] F. Xu, B. Guo, Z. Xu, L. M. Tolbert, F. Wang, and B. J. Blalock, “SiC based current source rectifier paralleling and circulating current suppression,” in 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC), 2013, pp. 402–409.
- [2] H. Yuan and X. Jiang, “A simple active damping method for Active Power Filters,” in Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC, 2016, vol. 2016–May, pp. 907–912.
- [3] J. C. Wiseman and B. Wu, “Active damping control of a high-power PWM current-source rectifier for line-current THD reduction,” IEEE Trans. Ind. Electron., vol. 52, no. 3, pp. 758–764, 2005.
- [4] J. Munoz, M. Sarbanzadeh, E. Sarebanzadeh, M. Rivera, and M. A. Hosseinzadeh, “Predictive Control in Power Converter Applications: Challenge and Trends,” 2019, pp. 1–6.
- [5] S. Vazquez, J. Rodriguez, M. Rivera, L. G. Franquelo, and M. Norambuena, “Model Predictive Control for Power Converters and Drives: Advances and Trends,” IEEE Trans. Ind. Electron., vol. 64, no. 2, pp. 935–947, 2017.
- [6] M. Rivera, P. Wheeler, A. Olloqui, and D. A. Khaburi, “A review of predictive control techniques for matrix converters-Part i,” in 7th Power Electronics, Drive Systems and Technologies Conference, PEDSTC 2016, 2016.
- [7] P. Zavala et al., “Predictive control of a current source rectifier with imposed sinusoidal input currents,” in IECON Proceedings (Industrial Electronics Conference), 2013, pp. 5842–5847.
- [8] M. Rivera, L. Tarisciotti, and P. Wheeler, “Indirect model predictive control with imposed sinusoidal source currents for a Direct Matrix Converter Working at fixed switching frequency,” in Proceedings - 2017 IEEE Southern Power Electronics Conference, SPEC 2017, 2018, vol. 2018–Janua, pp. 1–6.[9] B. Feng and H. Lin, “Finite control set model predictive control of AC/DC matrix converter for grid-connected battery energy storage application,” J. Power Electron., vol. 15, no. 4, pp. 1006–1017, 2015.
- [10] I. Lizama, J. Rodríguez, B. Wu, P. Correa, M. Rivera, and M. Pérez, “Predictive control for current source rectifiers operating at low switching frequency,” in 2009 IEEE 6th International Power Electronics and Motion Control Conference, IPEMC ’09, 2009, pp. 1630–1633.
- [11] P. Correa and J. Rodriguez, “A predictive control scheme for current source rectifiers,” in 2008 13th International Power Electronics and Motion Control Conference, 2008, pp. 699–702.
- [12] H. Gao, B. Wu, D. Xu, and N. R. Zargari, “A Model Predictive Power Factor Control Scheme with Active Damping Function for Current Source Rectifiers,” IEEE Trans. Power Electron., vol. 33, no. 3, pp. 2655–2667, 2018.
- [13] M. Sitterly, L. Y. Wang, G. G. Yin, and C. Wang, “Enhanced identification of battery models for real-time battery management,” IEEE Trans. Sustain. Energy, vol. 2, no. 3, pp. 300–308, 2011.
There are 12 citations in total.
Details
| Primary Language | English |
|---|---|
| Subjects | Electrical Engineering |
| Journal Section | Research Articles |
| Authors | |
| Publication Date | October 1, 2019 |
| Submission Date | March 21, 2019 |
| Acceptance Date | May 21, 2019 |
| Published in Issue | Year 2019 Volume: 23 Issue: 5 |
Cite
Cited By
Modulated Model Predictive Torque Control for Interior Permanent Magnet Synchronous Machines
El-Cezeri Fen ve Mühendislik Dergisi
https://doi.org/10.31202/ecjse.1008121
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.