Abstract
Metallic coatings can be fabricated using the intense plasma generated by the metal vapor vacuum arc. We have made and tested an embodiment of vacuum arc plasma source that operates in a pulsed mode, thereby acquiring precise control over the plasma flux and so also over the deposition rate, and that is in the form of a miniature plasma gun, thereby allowing deposition of metallic thin films to be carried out in confined spaces and also allowing a number of such guns to be clustered together.
The plasma is created at the cathode spots on the metallic cathode surface, and is highly ionized and of directed energy a few tens of electron volts. Adhesion of the film to the substrate is thus good. Virtually all of the solid metals of the Periodic Table can be used, including highly refractory metals like tantalum and tungsten. Films, including multilayer thin films, can be fabricated of thickness from Angstroms to microns. We have carried out preliminary experiments using several different versions of miniature, pulsed, metal vapor vacuum arc plasma guns to fabricate metallic thin films and multilayers.
Here we describe the plasma guns and their operation in this application, and present examples of some of the thin film structures we have fabricated, including yttrium and platinum films of thicknesses from a few hundred Angstroms up to 1 micron and an yttrium-cobalt multilayer structure of layer thickness about 100 Angstroms.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
T. W. BarbeeJr., Proc. SPIE 563, 3 (1985)
E. Spiller, AIP Proc. 75, 125 (1981)
E. H. C. Parker, editor, “The Technology and Physics of Molecular Beam Epitaxy”, Plenum Press, New York, 1985
B. R. Appleton, R. A. Zuhr, T. S. Noggle, N. Herbots, S. J. Pennycook and G. D. Alton, MRS Bulletin 12, 52 (1987)
J. M. E. Harper, in “Thin Film Processes”, edited by J. L. Vossen and W. Kern, Academic press, New York, 1978
J. P. Rebouillat, B. Michelutti, Y. Souche, J. P. Gavigan, D. Givord and A. Lienard, in “Growth, Characterization and Properties of Ultrathin Magnetic Films and Multilayers”, (B. T. Jonker, J. P. Heremans and E. E. Marinero, editors), MRS Symposium Proceedings Vol.151, p. 259 (1989).
“Laser Ablation for Thin Film Deposition”, Symposium N, this conference.
C. M. Falco, in “Physics, Fabrication, and Applications of Multilayered Structures”, edited by P. Dhez and C. Weisbuch, Plenum Press, N.Y., 1988.
T. W. BarbeeJr., in “Synthetic Modulated Structures”, edited by L. L. Chang and B. C. Geissen, Academic Press, Orlando, Fla, 1985.
T. W. BarbeeJr., Opt. Eng. 25, 898 (1986).
“Vacuum Arcs - Theory and Application”, edited by J. M. Lafferty, Wiley, New York, 1980.
R. L. Boxman, S. Goldsmith, S. Shalev, H. Yaloz and N. Brosh, Thin Solid Films 139, 41 (1985).
D. M. Sanders, ”Review of Ion Based Coating Processes Derived from the Cathodic Arc”, J. Vac. Sci. Tech. A7, 2339 (1989).
C. Bergman, in “Ion Plating and Implantation”, edited by R. F. Hochman, American Society for Metals, USA, 1986. (Proceedings of the ASM Conference on Applications of Ion Plating and Implantation to Materials, June 3–5, 1985, Atlanta, GA).
P. A. Lindfors, “Ion Plating and Implantation”, edited by R. F. Hochman, American Society for Metals, USA, 1986. (Proceedings of the ASM Conference on Applications of Ion Plating and Implantation to Materials, June 3-5, 1985, Atlanta, GA).
One such manufacturer is Vac-Tec Systems, Inc., Boulder, CO.
G. A. Lyubimov and V. I. Rakhovskii, Sov. Phys. Usp. 21(8), 693 (1978).
I. G. Brown, J. E. Galvin, and R. A. MacGill, Appl. Phys. Lett. 47, 358 (1985).
I. G. Brown, J. E. Galvin, B. F. Gavin, and R. A. MacGill, Rev. Sci. Instrum. 57, 1069 (1986).
I. G. Brown, in “The Physics and Technology of Ion Sources”, I. G. Brown editor, Wiley, N.Y., 1989.
I. G. Brown, B. Feinberg, and J. E. Galvin, J. Appl. Phys. 63, 4889 (1988).
X. Godechot and I. G. Brown, to be published.
J. Sasaki and I. G. Brown, J. Appl. Phys. 66, 5198 (1989).
D. T. Tuma, C. L. Chen and D. K. Davies, J. Appl. Phys. 49, 3821 (1978).
J. E. Daalder, Physica 104C, 91 (1981).
I. I. Aksenov, I. I. Konovalov, E. E. Kudryavtseva, V. V. Kunchenko, V. G. Padalka and V. M. Khoroshikh, Sov. Phys. Tech. Phys. 29(8), 893 (1984).
I. I. Aksenov, V. A. Belous, V.G. Padalka and V. M. Khoroshikh, Sov. J. Plasma Phys. 4(4), 425 (1978).
V. A. Osipov, V. G. Padalka, L. P. Sablev and R. I. Stupak, Instrum. and Exp. Techniques 21(6), 173 (1978).
I. I. Aksenov, S. I. Vakula, V. G. Padalka, V. E. Strelnitski and V. M. Khoroshikh, Sov. Phys. Tech. Phys. 25(9), 1164, (1980).
S. Shalev and R. L. Boxman, IEEE Trans. Plasma Sci. PS-14, 59 (1986).
V. S. Voitsenya, A. G. Gorbanyuk, I. N. Onishchenko and B. G. Safranov, Sov. Phys. - Tech. Phys. 9(2), 221 (1964).
I. I. Aksenov, A. N. Belokhvostikov, V. G. Padalka, N. S. Repalov and V. M. Khoroshikh, Plasma Physics and Controlled Fusion 28, 761 (1986)
J. Storer, J. E. Galvin and I. G. Brown, J. Appl. Phys. 66, 5245 (1989).
Acknowledgement
This work was supported by the U.S. Department of Energy under Contract No. DE-AC03-76SF00098.
Author information
Authors and Affiliations
Additional information
On leave to Lawrence Berkeley Laboratory from SODERN, 1 Ave. Descartes, 94451 Limeil-Brevannes, France
Rights and permissions
About this article
Cite this article
Godechot, X., Salmeron, M.B., Ogletree, D.F. et al. Thin Film Synthesis Using Miniature Pulsed Metal Vapor Vacuum arc Plasma Guns. MRS Online Proceedings Library 190, 95–100 (1990). https://doi.org/10.1557/PROC-190-95
Published:
Issue Date:
DOI: https://doi.org/10.1557/PROC-190-95