Abstract
Seals are required for a functioning solid oxide fuel cell (SOFC). These seals must function at high temperatures of 600–900 °C and in oxidizing and reducing environments of the fuels and air. Among the different type of seals, the metal–ceramic seals require significant attention, research, and development because the brittle nature of ceramics and glasses leads to fracture and loss of seal integrity and functionality. A novel concept of self-healing/self-repairable glass seals is proposed, developed, and used for making metal–glass–ceramic seals for application in SOFC for enhancing reliability and life. Glasses and glass–ceramics displaying self-healing behavior are investigated and used to fabricate seals. The performance of these seals under long-term exposure at higher temperatures coupled with thermal cycling is characterized. Self-repairability of these glass seals is also demonstrated by leak tests along with the long-term performance. An approach for studying the kinetics of crack healing in glasses and glass–ceramics responsible for self-repair is briefly described.
Similar content being viewed by others
References
N.Q. Minh: Ceramic fuel cells. J. Am. Ceram. Soc. 76(3), 563–588 (1993).
H. Tu and U. Stimming: Advances, ageing mechanism and lifetime in solid oxide fuel cells. J. Power Sources 127, 284–293 (2004).
Z. Yang, G. Xia, K.D. Meinhardt, K.S. Weil, and J.W. Stevenson: Chemical stability of glass seal interface in intermediate temperature solid oxide fuel cell. J. Mater. Eng. Perform. 13, 327–334 (2004).
S.B. Sohn, S.Y. Choi, G.H. Kim, H.S. Song, and G.D. Kim: Stable sealing glass for planar solid oxide fuel cell. J. Non-Cryst. Solids 297, 103–112 (2002).
R.N. Singh: High temperature seals for solid oxide fuel cells, in Proceedings of Twenty Ninth International Conference on Advanced Ceramics and Composites, Cocoa Beach, FL. 25(3), 299–307 (2004).
R.N. Singh: High temperature seals for solid oxide fuel cells, in Proceedings of ASM International Conference (J. Mater. Eng. Perform., 15, Columbus, OH, 2007); pp 422–426, Oct 18-20, 2004.
Y.S. Chou: Compressive seals development, in SECA Core Technology Program Review (Albany, NY, 2003).
Y.S. Chou, J.W. Stevenson, and L.A. Chick: Ultra low leak rate of hybrid compressive mica seals for SOFC. J. Power Sources 112, 130 (2002).
R.N. Singh and S.S. Parihar: Layered composite seals for solid oxide fuel cells, in Proceedings of Twenty Ninth International Conference on Advanced Ceramics and Composites, Vol. 26(4), Cocoa Beach, FL, 2005. Ad. Solid Oxide Fuel Cells.
S.S. Parihar and R.N. Singh: Self healing glass seals for solid oxide fuel cell, in Proceedings of Hundred and Seventh Annual Meeting, 2005. (American Ceramic Society, Baltimore, MD, 2005).
R.N. Singh and S.S. Parihar: High temperature seals for solid oxide fuel cells (SOFC), in SECA Core Technology Workshop (Tampa, FL, 2005).
R.N. Singh: Sealing technology for solid oxide fuel cells. Int. J. Appl. Ceram. Technol. 4(2), 134–144 (2007).
K.S. Weil, J.S. Hardy, and J.Y. Kim: Use of a novel ceramic-metal braze for joining in high temperature electrochemical devices, in The Joining of Advanced and Specialty Materials, edited by J.E. Indacochea (ASM International, Materials Park, OH, 2003); pp. 47–55.
R.K. Brow and D.S. Reis: Designing Sealing Glasses for Solid Oxide Fuel Cells (ASM Materials Solutions Conference Exposition, Columbus, OH, 2004).
C. Lewinsohn, S. Quist, and S. Elangovan: Novel materials for obtaining compliant, high temperature seals for solid oxide fuel cells. in SECA Core Technology Program Review (Albany, NY, 2003).
Y.S. Chou and J.W. Stevenson: Mid-term stability of novel mica-based compressive seals for SOFC. J. Power Sources 115, 274 (2003).
R. Loehman: Development of high performance seals for solid oxide fuel cells, in SECA Core Technology Program Review (Albany, NY, 2003).
S. Tanaguchi, M. Kadowaki, T. Yasuo, Y. Akiyamu, Y. Miyaki, and K. Nishio: Improvement of thermal cycle characteristics of a planar-type SOFC by using ceramic fiber as a sealing material. J. Power Sources 90, 163 (2000).
I.W. Donald: Review: Preparation, properties, and chemistry of glass and glass- ceramic-to metal seals and coatings. J. Mater. Sci. 28, 2841 (1993).
W.D. Kingery, H.K. Bowen, and D.R. Uhlman: Introduction to Ceramics (Wiley, New York, NY, 2nd ed., 1976); pp. 590–598.
N. Govindraju, W.N. Liu, X. Sun, P. Singh, and R.N. Singh: A modeling study on the thermomechanical behavior of glass-ceramic and self-healing glass seals at elevated temperatures. J. Power Sources 190, 476–484 (2008).
T.K. Gupta: Crack healing and strengthening of thermally shocked alumina. J. Am. Ceram. Soc. 58, 5–6 (1976).
C.F. Yen and R.L. Coble: Spheroidization of tubular voids in Al2O3 at high temperatures. J. Am. Ceram. Soc. 55(10), 507–509 (1972).
R.N. Singh and J.L. Routbort: Fracture and crack healing in (U, Pu)C. J. Am. Ceram. Soc. 62(3–4), 128–133 (1979).
F.F. Flange: Crack healing by heat treatment. J. Am. Ceram. Soc. 53(1), 54–55 (1975).
M. Wiederhorn and P.R. Townsend: Crack healing in glass. J. Am. Ceram. Soc. 53(9), 486–489 (1970).
F.A. Nichols and W.W. Mullins: Surface-(interface) and volume-diffusion contributions to morphological changes driven by capillarity. Trans. Metall. Soc. AIME 233, 1840–1848 (1965).
T.K. Gupta: Instability of cylindrical voids in alumina. J. Am. Ceram. Soc. 61(5–6), 191–195 (1978).
R. Raj, W. Pavinich, and C.N. Ahlquist: On the sintering rate of cleavage cracks. Acta Metall. 23(3), 399–403 (1975).
W.H. Wu, J.L. Zhang, W.H. Zhou, and Y.N. Huang: A method to study the crack healing process of glass formers. Appl. Phys. Lett. 92(1), 11918 (2008).
B.A. Wilson and E.D. Case: In situ microscopy of crack healing in borosilicate glass. J. Mater. Sci. 32, 3163–3175 (1997).
T.K. Gupta: Crack healing in Al2O3, MgO, and related materials. Adv. Ceram. 10, 750–766 (1984).
A. Jagota and P.R. Dawson: Simulation of the viscous sintering of two particles. J. Am. Ceram. Soc. 73(1), 173–177 (1990).
Y.L. Wang, U. Anandkumar, and R.N. Singh: Effect of fiber bridging stress on the fracture resistance of fiber reinforced ceramic composites. Am. Cerm. Soc. 83(3), 1207–1214 (2000).
Y-S. Chou, E.C. Thomsen, J-P. Choi, and J.W. Stevenson: Compliant alkali silicate sealing glass for solid oxide fuel cell applications: Combined stability in isothermal ageing and thermal cycling with YSZ coated ferritic stainless steels. J. Power Sources 197, 154–160 (2012).
T. Zhang, Q. Zou, J. Zhang, D. Tang, and H. Yang: Development of ceramic sealant for solid oxide fuel cell applications: Self-healing property, mechanical stability, and thermal stability. J. Power Sources 204, 122–126 (2012).
Acknowledgment
The author is grateful to S.S. Parihar for the experimental work described in the paper. This project was partly supported by National Science Foundation under Grant No. DMR-1147812 and U.S. Department of Energy-SECA program through Grant No. DE- DE-09FE001390. Any opinions, findings, conclusions, or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of the National Science Foundation.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Singh, R.N. Self-repairable glass seals for solid oxide fuel cells. Journal of Materials Research 27, 2055–2061 (2012). https://doi.org/10.1557/jmr.2012.188
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/jmr.2012.188