Abstract
Ink-jet printing is a versatile freeform fabrication technique with a high spatial resolution. By suspending ceramic particles in low melting point organic materials and printing above the melting point, rapid cooling on impact after printing results in rapid layer growth. Current results from a collaborative programme studying the hot wax ink-jet printing of structural ceramic components will be reported. The influence of key fluid properties on the ink-jet deposition process are discussed.
Similar content being viewed by others
References
E. Sachs, M. Cima, P. Williams, D. Brancazio, J. Cornie, ASME J. Eng. Ind. 114, 481 (1992).
J. Yoo, M. Cima, E. Sachs, and S. Suresh, Ceram. Eng. Sci. Proc. 16 [5], 755 (1995).
J. Yoo, K. Cho, W. Bae, M. Cima and S. Suresh, J. Amer. Ceram. Soc. 81, 21 (1998).
W.D. Teng, M.J. Edirisinghe, J.R.G. Evans. J. Amer. Ceram. Soc., 80, 486 (1997).
Q.F. Xiang, J.R.G. °Evans, M.J. Edirisinghe, P.F. Blazdell, Proc. Inst. Mech Eng. B-J. Eng. Manuf 211, 211 (1997).
C.E. Slade, J.R.G. °Evans. Mater. Sci. Lett. 17, 1669 (1998).
M. Mott, J.H. Song, J.R.G. °Evans, J. Amer. Ceram. Soc. 82, 1653 (1999).
J. Windle and B. Derby, J. Mater. Sci. Lett. 18, 87 (1999).
K.A.M. Seerden, N. Reis, B. Derby, P.S. Grant, J.W. Halloran and J.R.G. Evans, MRS Symp. Proc. 542, 141 (1999).
N. Reis, K.A.M. Seerden, B. Derby, P.S. Grant, J.W. Halloran and J.R.G. Evans, MRS Symp. Proc. 542, 147 (1999).
J.E. Fromm, IBM J. Res. Dev. 28 p. 322 (1984).
R. Bhola and S. Chandra, J. Mater. Sci. 34, 4883 (1999).
C. Mundo, M. Sommerfield and C. Tropea, Inter. J. Multiphase Flow, 21, 151 (1995).
C.D. Stow and M.G. Hadfield, Proc. Royal Soc. Lon. A 373, 419 (1981).
J.H. Song and J.R.G. Evans, J. Rheol. 40, p. 131–152 (1996).
N. Reis and B. Derby, in this issue.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Derby, B., Reis, N., Seerden, K.A.M. et al. Freeform Fabrication of Ceramics by Hot-Melt Ink-Jet Printing. MRS Online Proceedings Library 625, 195 (2000). https://doi.org/10.1557/PROC-625-195
Published:
DOI: https://doi.org/10.1557/PROC-625-195