Abstract
Epitaxial diamond films were deposited on polished single crystal Ib type HPHT diamond plates of (100) orientation by microwave CVD. The epilayers were used for the fabrication of surface channel MESFET structures having sub-micrometer gate length in the range 200-800 nm. Realized devices show maximum drain current and trasconductance values of about 190 mA/mm and 80 mS/mm, respectively, for MESFETs having 200 nm gate length. RF performance evaluation gave cut off frequency of about 14 GHz and maximum oscillation frequency of more than 26 GHz for the same device geometry.
Similar content being viewed by others
References
H. Taniuchi, H. Umezawa, T. Arima, M. Tachiki, H. Kawarada, IEEE Electron Dev. Lett. 22, 390 (2001).
M. Kasu, K. Ueda, H. Ye, Y. Yamauchi, S. Sasaki, T. Makimoto, Diamond Relat. Mater. 15, 783 (2006).
H. Ye, M. Kasu, K. Ueda, H. Ye, Y. Yamauchi, N. Maeda, S. Sasaki, T. Makimoto, Diamond Relat. Mater. 15, 787 (2006).
F. Maier, J. Ristein, L. Ley, “Origin of the surface conductivity in diamond”, Phys. Rev. B 85, 3472 (2000).
D. Takeuci, M. Riedel, J. Ristein, L. Ley, Phys. Rev. B 68, 4130 (2003).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Calvani, P., Rossi, M.C., Conte, G. et al. MESFETs on H-terminated Single Crystal Diamond. MRS Online Proceedings Library 1203, 1503 (2009). https://doi.org/10.1557/PROC-1203-J15-03
Received:
Accepted:
Published:
DOI: https://doi.org/10.1557/PROC-1203-J15-03