Abstract
A new method of sintering diamond-silicon carbide composites is proposed. This method is an alternate to the liquid silicon infiltration technique and is based on simultaneous ball milling of diamond and silicon powder mixtures. Composites with fine-grain diamonds embedded in a diamond–SiC nanocrystalline matrix were sintered from these mixtures. Scanning electron microscopy, x-ray diffraction, and Raman scattering were used to characterize the ball-milled precursors and the sintered composites. It was found that the presence of diamond micron-size particles in the initial powder mixture promotes milling of silicone particles and their transformation into the amorphous state. Mechanical properties of the composites, sintered from mixtures of different ball-milling history at different pressure–temperature conditions, (6 GPa/1400 °C and 8 GPa/2000 °C) were studied.
Similar content being viewed by others
References
H.T. Hall, Science 169, 868 (1970).
G.A. Voronin, in High Pressure Sintering of Diamond and CBN Composite Materials by Infiltration, Proceedings of Joint AIRAPT-16 and HPCJ-38 International Conference on High Pressure Science and Technology, Kyoto, Japan (World Scientific, Singapore, Japan, 1998), p. 467.
S.K. Gordeev, S.G. Zhukov, L.V. Danchukova, and T.C. Ekstrom, Inorg. Mater. 37, 579 (2001).
Y.S. Ko, T. Tsurumi, O. Fukunaga, and T. Yano, J. Mater. Sci. 36, 469 (2001).
I.E. Clark and P.A. Bex, Indust. Diamond Rev. 1, 43 (1999).
M.J. Lipp, V.G. Baonza, W.J. Evans, and H.E. Lorenzana, Phys. Rev. B 56, 5978 (1997).
S. Prawer, K.W. Nugent, D.N. Jamieson, J.O. Orwa, L.A. Bursill, and J.L. Peng, Chem. Phys. Lett. 332, 93 (2000).
D.M. Gruen, Ann. Rev. Mater. Sci. 29, 211 (1999).
M. Yoshikawa, Y. Mori, H. Obata, M. Maegawa, G. Katagiri, H. Ishida, and A. Ishitani, Appl. Phys. Lett. 67, 694 (1995).
A.R. Krauss, O. Auciello, D.M. Gruen, A. Jayatissa, A. Sumant, J. Tucek, D.C. Mancini, N. Moldovan, A. Erdemir, D. Ersoy, M.N. Gardos, H.G. Busmann, E.M. Meyer, and M.Q. Ding, Diamond Relat. Mater. 10, 1952 (2001).
W. Zhu, G.P. Kochanski, and S. Jin, Science 282, 1471 (1998).
M. Ohkoshi, T. Akashi, K. Yamada, and A.B. Sawaoka, J. Mater. Proc. Tech. 85, 131 (1999).
E.A. Ekimov, A.G. Gavriliuk, B. Palosz, S. Gierlotka, P. Dluzewski, E. Tatianin, Yu. Kluev, A.M. Naletov, and A. Presz, Appl. Phys. Lett. 77, 954 (2000).
T.D. Shen, C.C. Koch, T.L. McCormick, R.J. Nemanich, J.Y. Huang, and J.G. Huang, J. Mater. Res. 10, 139 (1995).
Y. Zhao, D. He, L.L. Daemen, J. Huang, T. Shen, R.B. Schwarz, Y. Zhu, D.L. Bish, J. Zhang, G. Shen, J. Qian, and T.W. Zerda (submitted).
J. Huang, Y.T. Zhu, and H. Mori, J. Mater. Res. 16, 1178 (2001).
P.N. Tomlinson, N.J. Pipkin, A. Lammer, and R.P. Burnand, Indust. Diamond Rev. 6, 299 (1985).
L.G. Khvostantsev, L.F. Vereshchagin, and A.P. Novikov, High Temp.-High Press. 9, 637 (1977).
L.G. Khvostantsev and A. Verkhniz, High Temp.-High Press. 16, 165 (1984).
R.C. Liebermann and B.S. Li, Rev. Mineralogy 37, 459 (1998).
G. Morell, R.S. Katiyar, S.Z. Weisz, and I. Balberg, J. Non-Cryst. Solids 194, 78 (1996).
P. Mishra and K.P. Jain, Phys. Rev. B 62, 14790 (2000).
H.K. Woo, C.S. Lee, I. Bello, and S.T. Lee, J. Mater. Res. 13, 1738 (1998).
C. Thomsen and S. Reich, Phys. Rev. Lett. 85, 5214 (2000).
F. Tuinstra and J.L. Koenig, J. Chem. Phys. 53, 1126 (1970).
X.Y. Yang, Z.W. Huang, Y.K. Wu, and H.Q. Ye, Mater. Sci. Eng. A 300, 278 (2001).
S.K. Bhaumik, C. Divakar, S.U. Devi, and A.K. Singh, J. Mater. Res. 14, 906 (1999).
G.A. Voronin, C. Pantea, T.W. Zerda, and K. Ejsmont, J. Appl. Phys. 90, 5933 (2001).
B. Chambers, J. Phys. Metal. Wiley, New York (1959).
P. Werner, H.J. Gossmann, and D.C. Jacobson, Appl. Phys. Lett. 73, 2465 (1998).
J. Qian, C. Pantea, G. Voronin, and T.W. Zerda, J. Appl. Phys. 90, 1632 (2001).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Qian, J., Voronin, G., Zerda, T.W. et al. High-pressure, high-temperature sintering of diamond–SiC composites by ball-milled diamond–Si mixtures. Journal of Materials Research 17, 2153–2160 (2002). https://doi.org/10.1557/JMR.2002.0317
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.2002.0317