Title: Some Recent Corrosion Embrittlement Failures of Prestressing Systems in the United States
Date: March-April, 1982
Volume: 27
Issue: 2
Page number: 38-55
Author(s): Morris Schupack, Mario G. Suarez
https://doi.org/10.15554/pcij.03011982.38.55
Click here to access the full journal article
Abstract
A limited survey was made tc gather as much data as possible on incidents of corrosion of prestressing steel which may have occurred in the United States during the past 5 years. From the authors experience and information gathered from close to 100 responses to the survey, 50 structures were found in which tendon corrosion has occurred. Corrosion incidents were usually found to be associated with poor details and/or execution, generally in the presence of an aggressive environment. Considering the fact that about 200,000 tons (approx. 180,000 metric tons) of prestressing steel per year are used in the United States, the number of incidents reported is small, particularly since about 40 percent of them have occurred in post-tensioned parking structures exposed to high concentrations of chlorides from deicing salts. Of the 50 corrosion incidents reported, 10 cases of probable brittle failures related to stress corrosion or hydrogen embrittlement were cited. It is likely that a few more may have occurred. In most cases, the exposure of the prestressing steel to an aggressive environment, particularly with sulphides present, has triggered the loss in ductility. Those incidents involving embrittlement, in which more details were available, are described herein. Recommendations are put forth whereby corrosion embrittlement failures of prestressing steels can be avoided.
References
1. Schupack, M., "A Survey of the Durability Performance of Post-Tensioning Tendons," ACI Journal, V. 75, No. 10, October, 1978, pp. 501,511.
2. Schupack, M., "Grouting Aid for Controlling the Separation of Water for Cement Grout fur Grouting Vertical Tendons in Nuclear Concrete Pressure Vessels," presented at the International Conference on Experience in the Design, Construction and Operation of Prestressed Concrete, Pressure Vessels and Containments for Nuclear Reactors, University of York, England, September, 1975.
3. Schupack, M., "Behavior of 20 Post-Tensioned Test Beams Subject to up to 2200 Cycles of Freezing and Thawing in the Tidal Zone at Treat Island, Maine," ACI SP-65, Performance of Concrete in Marine Environment, American Concrete Institute, Detroit, Michigan, 1980, pp. 133-152.
4. Peterson, Carl A., "Survey of Parking Structure Deterioration and Distress," Concrete International, V. 2, No. 3, March, 1980, pp. 53-61.
5. Townsend, Jr., H. E., "Hydrogen Sulfide Stress Corrosion Cracking of High Strength Steel Wire," Corrosion -NACE, V. 28, 1972, pp. 39-46.
6. Schupack, M., "Prestressed Concrete Tank Performance," ACI SP-8, Concrete Construction in Aqueous Environments, American Concrete Institute, Detroit, Michigan, 1964, pp. 55-65.
7. Phillips, E., "Survey of Corrosion of Prestressing Steel in Concrete Water-Retaining Structures," Australian Water Resources Council Technical Paper No. 8.
8. ACI Committee 201, "Guide to Durable Concrete," ACI Journal, V. 74. No. 12. December, 1977, pp. 573-594.
9. O'Neil, E. F., "Durability and Behavior of Prestressed Concrete Beams; Posttensioned Concrete Beam Investigation with Laboratory Tests from June 1961 to September 1974," Technical Report No. 6-570, Report 4, U. S. Army Engineer Waterways Experiment Station, Corps of Engineers, Vicksburg, Mississippi (NTIS AD A038 444), February, 1977.