Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter November 29, 2014

Additive manufacturing of cell-loaded alginate enriched with alkaline phosphatase for bone tissue engineering application

  • Rainer Detsch EMAIL logo , Bapi Sarker , Tobias Zehnder , Aldo R. Boccaccini and Timothy E.L. Douglas
From the journal BioNanoMaterials

Abstract

Hydrogels are gaining interest as scaffolds for bone tissue regeneration due to ease of incorporation of cells and biological molecules such as enzymes. Mineralization of hydrogels, desirable for bone tissue regeneration applications, may be achieved enzymatically by incorporation of alkaline phosphatase (ALP). Additive manufacturing techniques such as bioplotting enable the layer-by-layer creation of three-dimensional hydrogel scaffolds with highly defined geometry and internal architecture. In this study, we present a novel method to produce macroporous hydrogel scaffolds in combination with cell-loaded capsule-containing struts by 3D bioplotting. This approach enables loading of the capsules and strut phases with different cells and/or bioactive substances and hence makes compartmentalization within a scaffold possible. 3D porous alginate scaffolds enriched with ALP and MG-63 osteoblast-like cells were produced by bioplotting struts of alginate which were loaded with pre-fabricated alginate capsules. Two combinations were compared, namely ALP in the struts and cells in the capsules and vice-versa. Both combinations were cytocompatible for cells and mineralization of scaffolds could be detected in both cases, according to an OsteoImage staining. ALP had no adverse effect on cytocompatibility and enhanced mitochondrial activity.


Corresponding author: Rainer Detsch, Institute of Biomaterials, Department of Materials Science and Engineering, University of Erlangen-Nuremberg, Cauerstr. 6, 91058 Erlangen, Germany, Phone: +49 91318525510, Fax: +4991318528602, E-mail:
aPresent address: Nano and Biophotonics Group, Faculty of Bioscience Engineering, Department of Molecular Biotechnology, Ghent University, Coupure Links 653, 9000 Gent, Belgium

Acknowledgments

This work was supported by the Emerging Fields Initiative (EFI) of the University of Erlangen-Nuremberg (project TOPbiomat). Timothy E.L. Douglas acknowledges the Research Foundation Flanders (FWO) for support in the framework of a postdoctoral fellowship.

Conflict of interest and ethical approval statements: The authors have no conflict of interest. No ethical approval was required for this study

References

1. Fedorovich NE, Alblas J, Hennink WE, Oner FC, Dhert WJ. Organ printing: the future of bone regeneration? Trends Biotechnol 2011;29:601–6.10.1016/j.tibtech.2011.07.001Search in Google Scholar PubMed

2. Gkioni K, Leeuwenburgh SC, Douglas TE, Mikos AG, Jansen JA. Mineralization of hydrogels for bone regeneration. Tissue Eng Part B Rev 2010;16:577–85.10.1089/ten.teb.2010.0462Search in Google Scholar PubMed

3. LeGeros RZ. Calcium phosphates in oral biology and medicine. San Francisco: Karger, 1991.Search in Google Scholar

4. Engler AJ, Sen S, Sweeney HL, Discher DE. Matrix elasticity directs stem cell lineage specification. Cell 2006;126:677–89.10.1016/j.cell.2006.06.044Search in Google Scholar PubMed

5. Evans ND, Minelli C, Gentleman E, LaPointe V, Patankar SN, Kallivretaki M, et al. Substrate stiffness affects early differentiation events in embryonic stem cells. Eur Cell Mater 2009;18:1–13; discussion 13–14.10.22203/eCM.v018a01Search in Google Scholar PubMed

6. Rowlands AS, George PA, Cooper-White JJ. Directing osteogenic and myogenic differentiation of MSCs: interplay of stiffness and adhesive ligand presentation. Am J Physiol Cell Physiol 2008;295:C1037–44.10.1152/ajpcell.67.2008Search in Google Scholar PubMed

7. Ruhe PQ, Boerman OC, Russel FG, Spauwen PH, Mikos AG, Jansen JA. Controlled release of rhBMP-2 loaded poly(dl-lactic-co-glycolic acid)/calcium phosphate cement composites in vivo. J Control Release 2005;106:162–71.10.1016/j.jconrel.2005.04.018Search in Google Scholar PubMed

8. Beertsen W, van den Bos T. Alkaline phosphatase induces the mineralization of sheets of collagen implanted subcutaneously in the rat. J Clin Invest 1992;89:1974–80.10.1172/JCI115805Search in Google Scholar PubMed PubMed Central

9. Douglas T, Wlodarczyk M, Pamula E, Declercq H, de Mulder E, Bucko M, et al. Enzymatic mineralization of gellan gum hydrogel for bone tissue-engineering applications and its enhancement by polydopamine. J Tissue Eng Regen Med 2012;8:906–18.10.1002/term.1616Search in Google Scholar PubMed

10. Douglas TE, Gassling V, Declercq HA, Purcz N, Pamula E, Haugen HJ, et al. Enzymatically induced mineralization of platelet-rich fibrin. J Biomed Mater Res A 2012;100:1335–46.10.1002/jbm.a.34073Search in Google Scholar PubMed

11. Douglas TE, Messersmith PB, Chasan S, Mikos AG, de Mulder EL, Dickson G, et al. Enzymatic mineralization of hydrogels for bone tissue engineering by incorporation of alkaline phosphatase. Macromol Biosci 2012;12:1077–89.10.1002/mabi.201100501Search in Google Scholar PubMed PubMed Central

12. Filmon R, Basle MF, Barbier A, Chappard D. Poly(2-hydroxy ethyl methacrylate)-alkaline phosphatase: a composite biomaterial allowing in vitro studies of bisphosphonates on the mineralization process. J Biomater Sci Polym Ed 2000;11:849–868.10.1163/156856200744057Search in Google Scholar

13. Spoerke ED, Anthony SG, Stupp SI. Enzyme directed templating of artificial bone mineral. Adv Mater 2009;21:425–30.10.1002/adma.200802242Search in Google Scholar

14. Yamauchi K, Goda T, Takeuchi N, Einaga H, Tanabe T. Preparation of collagen/calcium phosphate multilayer sheet using enzymatic mineralization. Biomaterials 2004;25:5481–9.10.1016/j.biomaterials.2003.12.057Search in Google Scholar

15. Lee KY, Mooney DJ. Alginate: properties and biomedical applications. Prog Polym Sci 2012;37:106–26.10.1016/j.progpolymsci.2011.06.003Search in Google Scholar

16. Wee S, Gombotz WR. Protein release from alginate matrices. Adv Drug Deliv Rev 1998;31:267–85.10.1016/S0169-409X(97)00124-5Search in Google Scholar

17. Billiet T, Vandenhaute M, Schelfhout J, Van Vlierberghe S, Dubruel P. A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering. Biomaterials 2012;33: 6020–41.10.1016/j.biomaterials.2012.04.050Search in Google Scholar

18. Fedorovich NE, De Wijn JR, Verbout AJ, Alblas J, Dhert WJ. Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing. Tissue Eng Part A 2008;14:127–33.10.1089/ten.a.2007.0158Search in Google Scholar

19. Heeg A. PhD-thesis 3D-Bioplotting mit vitalen ZellenUniversitätsklinik für Zahn-, Mund- und Kieferheilkunde der Albert-Ludwigs-Universität Freiburg, Freiburg. 2010.Search in Google Scholar

20. Lin HR, Yeh YJ. Porous alginate/hydroxyapatite composite scaffolds for bone tissue engineering: preparation, characterization, and in vitro studies. J Biomed Mater Res B Appl Biomater 2004;71:52–65.Search in Google Scholar

21. Hutmacher DW. Scaffolds in tissue engineering bone and cartilage. Biomaterials 2000;21:2529–43.10.1016/S0142-9612(00)00121-6Search in Google Scholar

22. Detsch R, Sarker B, Grigore A, Boccaccini AR. Alginate and gelatine blending for bone cell printing and biofabrication. 10th IASTED International Conference on Biomedical Engineering. BioMed 2013;2013:451–5.Search in Google Scholar

23. Landers R, Hübner U, Schmelzeisen R, Mülhaupt R. Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering. Biomaterials 2002;23:4437–47.10.1016/S0142-9612(02)00139-4Search in Google Scholar

24. Grigore A, Sarker B, Fabry B, Boccaccini AR, Detsch R. Behavior of encapsulated MG-63 cells in RGD and gelatine-modified alginate hydrogels. Tissue Eng Part A 2014;19:1–11.10.1089/ten.tea.2013.0416Search in Google Scholar PubMed

25. Gungormus M, Branco M, Fong H, Schneider JP, Tamerler C, Sarikaya M. Self assembled bi-functional peptide hydrogels with biomineralization-directing peptides. Biomaterials 2010;31:7266–74.10.1016/j.biomaterials.2010.06.010Search in Google Scholar PubMed PubMed Central

26. Rottensteiner U, Sarker B, Heusinger D, Dafinova D, Rath SN, Beier JP, et al. In vitro and in vivo biocompatibility of alginate dialdehyde/gelatin hydrogels with and without nanoscaled bioactive glass for bone tissue engineering applications. Materials 2014;7:1957–74.10.3390/ma7031957Search in Google Scholar PubMed PubMed Central

27. Landers R, Pfister A, Hübner U, John H, Schmelzeisen R, Mülhaupt R. Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques. J Mater Sci 2002;37:3107–16.10.1023/A:1016189724389Search in Google Scholar

28. Chang R, Nam J, Sun W. Effects of dispensing pressure and nozzle diameter on cell survival from solid freeform fabrication-based direct cell writing. Tissue Eng – Part A 2008;14:41–8.10.1089/ten.a.2007.0004Search in Google Scholar PubMed

29. Khalil S, Sun W. Bioprinting endothelial cells with alginate for 3D tissue constructs. J Biomech Eng 2009;131:111002–1.10.1115/1.3128729Search in Google Scholar PubMed

30. Ahn SH, Lee HJ, Puetzer J, Bonassar LJ, Kim GH. Fabrication of cell-laden three-dimensional alginate-scaffolds with an aerosol cross-linking process. J Mater Chem 2012;22:18735.10.1039/c2jm33749eSearch in Google Scholar

31. Bongio M, van den Beucken JJ, Nejadnik MR, Leeuwenburgh SC, Kinard LA, Kasper FK, et al. Biomimetic modification of synthetic hydrogels by incorporation of adhesive peptides and calcium phosphate nanoparticles: in vitro evaluation of cell behavior. Eur Cell Mater 2011;22:359–76.10.22203/eCM.v022a27Search in Google Scholar PubMed

Received: 2014-5-28
Accepted: 2014-11-10
Published Online: 2014-11-29
Published in Print: 2014-12-1

©2014 by De Gruyter

Downloaded on 24.4.2024 from https://www.degruyter.com/document/doi/10.1515/bnm-2014-0007/html
Scroll to top button