Abstract
This study focuses on weld integrity of stainless steels in bus coach applications. Safety aspects have been studied based on fracture mechanics and impact toughness testing. Fatigue resistance of welded rectangular hollow section (RHS) profiles was evaluated according to the Eurocode 3 (1992) fatigue standard. Corrosion resistance was studied by salt-spray chamber tests in a deicing salt atmosphere and by field testing for 3 years under an urban bus. The mechanical tests show that austenitic stainless steel EN 1.4310 (AISI 301) is a superior material, and a low-C 12% Cr alloyed stainless steel EN 1.4003 is also a competitive material in bus coach applications. According to the life cycle cost (LCC) calculations, stainless steels are competitive compared with carbon steels or aluminum.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
H. Nordberg: Report MTR 1/98, Helsinki University of Technology, Otaniemi, Finland.
F. Capelli: 3rd Global Market Development Forum for Stainless Steel, NiDI, (Nickel Development Institute), June, 1992, Toronto, pp. 51–57.
R. Kiessling: Stainless Steel, 1992, Mar./Apr.
T. Nakano: Innovation Stainless Steel, Florence, Italy, 1993, pp. 1.181–1.186.
N. Paulus and C.M. Houska: Int. Conf. Stainless Steels ’96, German Iron and Steel Institute (VDEh) Dusseldorf, Germany, 1996, pp. 207–14.
Novità strutturali nel settore autobus, Inossidabile, March 1989, Centroinox, Milano, Italy.
Viaggi più sicuri se il bus è inox, Inossabile, 1995, Mar.
F.W. Rosvold: Chromium Rev., 1987, Dec., No. 8, pp. 1–3.
N.N. Stainless steel—an increasingly popular material for bus frames, UTI, 1993, No. 1, pp. 22–23.
N.N. Breakthrough of stainless in bus bodyworks—Berghof replaces black steel. Stainless Steel Europe, March 1993, pp. 33–35.
M. Heikonen: Proc. NI-Seminar Stainless Steels in Transport Industry, Feb. 4–5, 1998, Report MTR 1/98, Helsinki University of Technology, Otaniemi, Finland.
D. Maxwell: Steel Times, 1992, Aug., pp. 373–76.
N.N. Chromweld Steels’ 3CR12 specified as standard for buses, Stainless Steel Europe, March 1993, p. 23.
Chromium Rev., 1991, Oct., No. 12.
D.K. Maxwell: 2nd Global Market Development Forum for Stainless Steel, NiDI (Nickel Development Institute), June 1990, London, pp. 51–53.
J.G. Ribeca: Nickel, Sept. 1991.
ESIS P2-92. ESIS procedure for determining the fracture behaviour of materials. European Structural Integrity Society (ESIS), Sheffield, U.K. 80 p.
ASTM E1921-97, ASTM, Philadelphia, PA.
M. Lokka: Publication MTR 1/96, Helsinki University of Technology, Otaniemi, Finland, 1996.
K. Wallin: Eng. Fract. Mech., 1994, vol. 32, pp. 449–57.
K.E. Lahti, M. Vilpas, A. Kyröläinen, M. Heikonen, and H. Hänninen: JOM-8, May 12–14, 1997, Helsingor, Denmark.
A. Kyröläinen and T. Kostamo: Salt Spray Chamber Tests for Welded Stainless Steel Hollow Sections and Sheets, Outokumpu Polarit Oy, Finland, 1995 (in Finnish).
K. Lahti: Master’s Thesis, Helsinki University of Technology, Otaniemi, Finland, 1996 (in Finnish).
K. Lahti, M. Vilpas, A. Kyröläinen, M. Lokka, and H. Hänninen: Proc 29th Int. Symp. Automotive Technology and Automation (ISATA), 3-6.6, 1996, Firenze, Italy, ISATA, Surrey, U.K., pp. 481–89.
M. Vilpas, K. Lahti, and H. Hänninen: Publication MTR 2/96, Helsinki University of Technology, Otaniemi, Finland, 1996.
M. Heikonen: Report MTR 3/97, Helsinki University of Technology, Otaniemi, Finland, 1997.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kyröläinen, A., Vilpas, M. & Hänninen, H. Use of stainless steels in bus coach structures. J. of Materi Eng and Perform 9, 669–677 (2000). https://doi.org/10.1361/105994900770345548
Received:
Issue Date:
DOI: https://doi.org/10.1361/105994900770345548