Abstract
In this study, the fabrication of an Al-4 wt.% Mg-graphite particle composite is described. Composites of Al-4 wt.% Mg alloys containing 1–10 volume percentages of graphite particles were prepared using the compocasting technique. A pitched-blade stirrer was used to stir the graphite particles in the semi-solid melt, and the slurry was then poured into a metallic mould to obtain the cast bars. The emphasis of the investigation was on the important features of the castings obtained by this method, specifically the distribution of graphite particles along the cast bars and porosities. Then we studied the effect of the addition of the graphite on the strength and hardness of these cast bars. The results show that both the tensile strength and the hardness decrease with the increase in graphite content.
Similar content being viewed by others
References
A. Berghezan: Basic Design Concepts and Specific Methods for the Fabrication of Metal-Matrix Composite Materials, Applied Science Publishers LTD, London, 1978.
P.K. Rohatgi: “Cast Metal-Matrix Composites” in ASM Handbook, ASM International, Materials Park, OH, 1992, pp. 840–52.
M.K. Surapa and P.K. Rohatgi: “Preparation and Properties of Cast Aluminum-Ceramic Particle Composites,” J. Mater. Sci., 1981, 16, pp. 983–93.
P.K. Rohatgi, S. Ray, and Y. Liu: “Tribological Properties of Metal Matrix-Graphite Particle Composites,” Int. Mater. Rev., 1992, 37(3), pp. 129–49.
B.P. Krishnan, M.K. Surappa, and P.K. Rohatgi: “The UPAL Process: A Direct Method of Preparing Cast Aluminum Alloy-Graphite Particle Composite,” J. Mater. Sci., 1981, 16, pp. 1209–16.
J.A. Al-Jarrah: “Synthesis and Tribological Characterization of Aluminum Base Composites,” Ph.D. Thesis, University of Roorkee, Roorkee, India, 1998.
P.K. Gosh, and S. Ray: “Effect of Porosity and Alumina Content on the High Temperature Mechanical Properties of Compocast Aluminum Particulate Composites,” J. Mater. Sci., 1987, 22, pp. 4077–81.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hassan, A.M., Hayajneh, M.T. & Al-Omari, M.AH. The effect of the increase in graphite volumetric percentage on the strength and hardness of Al-4 weight percent Mg-graphite composites. J. of Materi Eng and Perform 11, 250–255 (2002). https://doi.org/10.1361/105994902770344024
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1361/105994902770344024