3D CAFE model for simulating the solidification microstructure of 430 stainless steelChinese Full Text
LAN Peng;SUN Hai-bo;LI Yang;ZHANG Jia-quan;State Key Laboratory of Advanced Metallurgy,University of Science and Technology Beijing;School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing;
Abstract: Taking heat transfer,flow of liquids,and solute diffusion into account,a three-dimensional cellular automata-finite element（3D CAFE） model was built to simulate the solidification microstructure of 430 stainless steel.Based on the model,the change laws of temperature,solidification fraction and grain morphology in the steel ingot were revealed during the solidification process.In the model,Gaussian distribution was employed to describe the relationship between the grain nucleation density and the degree of undercooling,and the KGT model was adopted to describe the dendrite growth.According to the Fe-C-17% Cr equilibrium phase diagram,the solidification path was determined,and the distribution of porosities and shrinkage cavities in the steel ingot was predicted.The temperature history and the final microstructure simulated by the model are in agreement with experimental results.
Keywords：
stainless steel; solidification; microstructure; cellular automata; finite element method; computer simulation;
- DOI：
10.13374/j.issn1001-053x.2014.03.006
- Series：
- Subject：
- Classification Code：
TG142.71
- Mobile Reading
Read on your phone instantly
Step 1Scan QR Codes
"Mobile CNKI-CNKI Express" App
Step 2Open“CNKI Express”
and click the scan icon in the upper left corner of the homepage.
Step 3
Scan QR Codes
Read this article on your phone.
- HTML
- CAJ Download
- PDF Download
Download the mobile appuse the app to scan this coderead the article.
Tips: Please download CAJViewer to view CAJ format full text.
Download: 538 Page: 315-322 Pagecount: 8 Size: 623K
Citation Network
Related Literature
- Similar Article
- Reader Recommendation
- Associated Author