日本機械学会論文集 C編
Online ISSN : 1884-8354
Print ISSN : 0387-5024
ハイポイドギヤの回転伝達誤差に関する研究 : 静的回転伝達誤差の測定
川崎 一正田村 久司
著者情報
ジャーナル フリー

1996 年 62 巻 603 号 p. 4309-4314

詳細
抄録

The measurement of transmission error is essential for development work and trouble-shooting in gearing when noise and vibration occur, and is also used for production control. For this reason, measurement and evaluation of the transmission error of hypoid gears are desirable. The authors have already proposed a method for cutting hypoid gears with modified tooth surface in which the transmission error is controllable to some degree. In this study, the static transmission error of the hypoid gears is measured under a lightly loaded condition. Two autocollimators which measure the exact angular positions of the ring gear and pinion are employed. The transmission error is obtained from the measured angular positions. As a result, the transmission errors caused by blade runout during pinion generation and by nonconjugation owing to the tooth surface modification were measured and confirmed clearly. The hypoid gears showed no deterioration of transmission error when misaligned.

著者関連情報
© 社団法人日本機械学会
前の記事 次の記事
feedback
Top