Skip to main content
  • Research article
  • Open access
  • Published:

Evaluation of the treatment of distal radial volar fracture by different methods sparing the pronator quadratus

Abstract

Objective

The traditional volar approach requires the release of the pronator quadratus (PQ) muscle in the treatment of distal radius fractures. However, intraoperative repair of the PQ muscle often fails due to tissue injury and unstable muscle repair. This study compared the outcomes of different methods of sparing the PQ muscle combined with the volar plate in treating distal radius fractures.

Methods

A total of 95 patients with distal radius fractures sparing the PQ muscle were enrolled with the brachioradialis (BR) splitting approach (group A, 33 people), the volar plating insertion PQ muscle approach (group B, 35 people) and traditional Henry approach without sparing PQ muscle (group C, 27 people). Postoperative internal fixation, fracture healing and postoperative complications were observed in the three groups. The visual analog scale (VAS) of postoperative wrist pain was compared between three groups. The Dienst joint scale was used to evaluate the wrist function of patients, and imaging indexes were used to evaluate the surgical efficacy.

Results

A total of 95 patients with distal radius fractures were followed up for more than one year after surgery. All fractures obtained good union, with no vascular injury, nerve injury or wound infection. Outcomes at three days, one month and three months all showed no significant differences in postoperative imaging indexes among three groups and no significant differences in various indexes among three groups during the same period. The mean operative time in group C was significantly lower than that in groups A and B. There was significant difference in the mean operation time between group A and group B. The amount of mean operative blood loss or mean bone union time in groups A and B was significantly lower than those in group C. No significant difference was shown in mean operative blood loss or mean bone union time between group A and group B. No significant differences in limb function scores, VAS scores and the mean range of motion existed among three groups at the 12-month postoperative follow-up. However, outcomes assessed one week, one month and three months after surgery demonstrated significant differences in the VAS scores and the mean range of motion among three groups, and the group B had lower VAS score and greater the mean range of motion. According to Dienst score, the excellent rate in groups A, B and C was 91.0% (30/33), 94.2% (33/35) and 85.2% (23/27), respectively, at 12 months after surgery. Tendon irritation occurred in 2 cases and joint stiffness in 1 case in group A. In group B, there were 2 cases traumatic arthritis and 2 cases delayed carpal tunnel syndrome and 1 case tendon irritation. In group C, tendon irritation and delayed carpal tunnel syndrome occurred, respectively, in 3 cases.

Conclusion

Our results demonstrated that these two different surgical approaches were effective ways to reserve PQ and had good clinical outcomes. The volar plating insertion PQ muscle approach could reduce early postoperative pain, promote early activity and return to normal life, while the BR splitting approach was more advantageous in intraoperative fracture exposure and could shorten the operative time. However, some defects also existed. At 12 months of follow-up, no significant advantage was seen in sparing the PQ muscle. Therefore, surgeons should be aware of their individual characteristics and choose patients carefully.

Background

Distal radial fracture is the conjuncture of cancellous and cortical bone, which is a fracture within 3 cm of the distal radius articular surface [1,2,3]. The incidence of osteoporosis, which easily leads to high loss and fracture fragment comminution after injury, accounts for about 17% of emergency orthopedic patients [4], and the data will improve as our population ages. Injuries involving high levels of energy are common in young patients with sports and traffic-related injuries. As a result of osteoporosis and increased life expectancy, elderly patients frequently sustain low-energy injuries [5]. If left untreated, it will result in a number of complications, such as wrist joint dysfunction, which will negatively impact patients' quality of life. To improve patient's quality of life, there has been an increase in the surgical treatment of distal radius fractures, primarily with volar lock plating fixation. Fixing a fracture and repairing the PQ muscle is controversial [6,7,8,9], despite its frequent application in clinical settings. Johnson et al. [10] first reported in 1976 that the PQ muscle stabilizes the radioulnar joint's distal end. Currently, the traditional Henry approach, which requires the surgeon to cut open the pronator muscle, is the method of choice for treating distal radius fractures.

Even in patients with intraoperative repair of the PQ muscle [11], Armangil et al. found a loss of pronation strength after surgery, which may be attributable to tissue injury and edema or inadequate repair. Due to intraoperative amputation of the PQ muscle and the difficulty of suturing, some orthopedic surgeons elect not to repair the PQ muscle following distal radius fracture fixation [12]. In the interim, close suturing of the PQ muscle can result in postoperative ischemic contraction of the wrist, thereby decreasing the wrist's functional range of motion [13, 14]. Therefore, the author considers whether this procedure improves the prognosis of distal radius fractures in the absence of PQ muscle transection.

In 2022, our team reported that the modified Henry approach with sparing pronator quadratus muscle, in which the periosteum was performed with a periosteal stripper to establish a tunnel posterior to the PQ muscle, through which the plate was inserted, can shorten the operation time, intraoperative blood loss and early return to social activities [15]. Kashir et al. [16] believed that the brachioradialis splitting technique for volar plating of distal radius fractures was simple and effective for sparing the PQ muscle. The authors believed that preserving the integrity of the PQ muscle could result in a favorable prognosis.

In this study, 95 patients with distal radius fractures underwent volar plate internal fixation. Intraoperative indexes, postoperative functional efficacy and complications were observed according to different surgical methods. The purpose of this retrospective study was to compare the treatment of three approaches with distal radial volar fracture and compared the clinical, functional and radiological results.

Methods

Following written approval by an institutional review board, a retrospective clinical study was conducted between October 2020 and March 2022. Ninety-five patients with distal radius fractures who underwent volar plating at the First Affiliated Hospital of Xinjiang Medical University were enrolled in the study. The brachioradialis (BR) splitting approach for volar plating of the distal radius fractures was group A, while group B spared the PQ muscle through the tunnel behind the PQ muscle. The group C was traditional Henry approach without sparing PQ muscle.

The inclusion criteria were as follows: (1) age ≥ 18 years; (2) unstable distal radius fracture due to the presence of dorsal angulation > 20° and shortening > 5 mm or dorsal comminution > 50%; (3) AO classification 23-B, 23-C1 and 23-C2; (4) failure of manual fracture reduction; (5) fresh closed fracture and; (6) with a minimum follow-up of 12 months. The following patients were excluded: (1) ipsilateral or contralateral upper limb fractures and/or dislocation; (2) other diseases of wrist joint function; (3) severe nerve and vascular injury; (4) history of distal radius fracture on the affected side; (5) initial external fixation; (6) mental illness; (7) inability to cooperate on time; (8) AO classification 23-A and 23-C3; (9) failure of manual fracture reduction; (10) time from injury to fracture (> 14 days).

Before the operation based on AO classification, the surgical approach was planned in advance by a professional medical team. The final decision depended on the actual intraoperative situation. If there was no primary injury to the PQ muscle, the fracture was repositioned without dissecting the PQ muscle by the volar plating insertion PQ muscle approach. The same medical team performed all surgical procedures. Three groups had no significant difference in demographics or fracture characteristics (Table 1).

Table 1 Baseline characteristics of the three groups

Surgical procedures

All patients were placed on the operating table under local anesthesia or general anesthesia and performed by the same team of physicians. For patients in group A, the BR splitting approach through a 5-cm longitudinal incision was made between the flexor carpi radialis and the radial artery. The superficial branch of the radial nerve could be seen below the incision, which should be protected. The radial artery is also identified and pulled to the radial side for protection. The BR tendon was released longitudinally at the attachment of the distal radius (Fig. 1a). The surgeon released the PQ/BR complex together and flipped it to the ulnar side to fully expose the fracture (Fig. 1b). The hematoma and embedded soft tissue of the fracture site were cleared, and 1 ~ 2 Kirschner wires were used to temporarily cross fix the broken end of the fracture. Traction reduction of the fracture was completed under direct vision. X-ray fluoroscopy showed a satisfactory selection of appropriate plate insertion, and the screws were sequentially fixed. Interrupted 3–0 and 4–0 absorbable sutures were used to preserve the PQ muscle by using inter-tendinous anastomosis (Fig. 2).

Fig. 1
figure 1

Brachioradialis splitting of the sparing PQ muscle approach. a Intraoperative exposure of the PQ/BR complex. b The PQ/BR complex was flipped to the ulnar side to fully expose the fracture

Fig. 2
figure 2

A 55-year-old female patient suffered a distal radius fracture from a fall and underwent the brachioradialis (BR) splitting approach. a-d Preoperative imaging of the affected limb. e, f Postoperative imaging of the affected limb

For patients in group B, the modified Henry approach through the incision between the flexor carpi radialis and brachioradialis was performed to separate the flexor carpi radialis tendon and radial artery vessels. The radial artery was confirmed and retracted radially. The tendon and median nerve were identified and retracted ulnarly. The PQ muscle was utterly exposed. The PQ muscle was then elevated with a periosteal stripper, and a tunnel was established behind the PQ muscle (Fig. 3a). The displaced articular surface and the collapsed dorsal fracture block were reduced, while the wrist joint was subjected to continuous traction with palmar flexion, and the dorsal fracture block was reduced by tendon capsular traction, and excessive thrust pushing was limited. 1 ~ 2 Kirschner wires were used to temporarily cross fix the broken end of the fracture. The articular surface was reconstructed with X-ray fluoroscopy. The distal end of the plate was below the watershed line [17] of the distal radius (Fig. 3b). The PQ muscle was cut lengthwise with a 0.5-cm incision, and the screw was implanted into the anterior rotator muscle corresponding to the hole. The ‘carpal shoot-through view’ can be used to determine whether the screws fixing the metaphysis have penetrated the carpal joint cavity. The tourniquet was released, the operative cavity was rinsed with normal saline, the skin was inserted and drained, the incision was sutured, and a sterile dressing was applied (Fig. 4).

Fig. 3
figure 3

Modified Henry approach. a Tunnel was established under the PQ muscle during the operation. b The plate was placed below the PQ muscle

Fig. 4
figure 4

A 56-year-old female patient suffered a distal radius fracture from traffic trauma and performed the modified Henry approach. a, b Preoperative imaging of the affected limb. c, d Postoperative imaging of the affected limb in 1 month after surgery. e, f Postoperative imaging of the affected limb in 3 months after surgery

For patients in group C, the steps to expose the PQ muscles are the same as the BR splitting approach. The PQ muscle was exposed and an L-shaped incision was performed along the radial border of the radius to the radial malleolus, and the PQ was then stripped off the radius. After the fragments were repositioned, fluoroscopic confirmation was obtained and a plate was inserted for internal fixation. During the operation, it was found that the PQ muscle had severe edema or damage, which made it difficult to repair, and it was decided to give up the repair.

Statistical analysis

SPSS Statistics software version 26.0 was applied to the statistical analysis. The mean ± SD was used to represent measurement data. Student's t test was used to compare measurement data (mean operative time, mean operative blood loss, mean bone union time). Single-factor variance test was used to compare the observed values of each index at different groups (mean age, mean interval between injury and operation). The count variables were analyzed by the Chi-square or Fisher's test (sex, side of hand, AO classification, cause of injury, Dienst score, total complication), expressed as a number. Repeated-measures analysis of variance was used to compare the observed values of each index at different time points (radial height, volar tilt, ulnar inclination). P < 0.05 was considered statistically significant.

Result

Ninth-five patients who suffered a distal radius fracture were treated with palmar plating of sparing PQ muscles and enrolled in the study, 33 in group A, 35 in group B and 27 in group C. All fractures were well unioned after up to one year of follow-up.

There was no significant difference in gender, age, side of hand, Ao classification, case of injury and mean interval between injury and operation among three groups (P > 0.05) (Table 1).

Evaluation of intraoperative index showed that the mean operative time in group A, group B and group C was 46.82 ± 7.50 min, 54.14 ± 7.22 min, 42.81 ± 4.38 min. It was showed that the mean operative blood loss was 22.72 ± 3.77 ml, 22.00 ± 2.77 ml, 35.18 ± 10.51 ml. The mean bone union time of three groups was 11.42 ± 0.50 weeks, 11.43 ± 0.50 weeks, 11.74 ± 0.52 weeks. The mean operative time in group C was significantly lower than that in groups A and B (p < 0.05). There was significant difference in the mean operation time between group A and group B. The amount of mean operative blood loss or mean bone union time in groups A and B was significantly lower than those in group C (p < 0.05). No significant difference was shown in mean operative blood loss or mean bone union time between group A and group B (P = 0.37 and 0.97, respectively) (Table 2). Outcomes at three days, one month and three months all prompted no significant differences in postoperative imaging indexes (radial height, volar tilt, ulnar inclination) among three groups (p > 0.05). There was no significant difference between three groups in the same period (p > 0.05)) (Tables 3, 4 and 5).

Table 2 Comparison of intraoperative indicators and fracture healing time among patients of each group
Table 3 Comparison of radius height among patients at various time points postoperatively
Table 4 Comparison of palm tilt angles among patients at various time points postoperatively
Table 5 Comparison of ulnar deviation in patients at various time points postoperatively

There was no significant difference in the results of complications among three groups (P = 0.13). No intraoperative nerve injury, vascular injury or wound complications were observed in three groups. Tendon irritation occurred in 2 (6.0%) cases and joint stiffness in 1 (3.0%) case in group A. In group B, there were 2 (5.7%) cases traumatic arthritis and 2 (5.7%) cases delayed carpal tunnel syndrome and 1 (2.8%) case tendon irritation. In group C, tendon irritation and delayed carpal tunnel syndrome occurred, respectively, in 3 cases (11.1%) (Table 6). Group B had a slightly excellent rate than group A and C in the Dienst score at the 12-month postoperative follow-up (91.0% vs. 94.2% and 85.2%). However, no significant differences were found among three groups (P = 0.56) (Table 6).

Table 6 Comparison of Dienst score and complications in patients of each group

The forearm range of motion on affected side in percentage of intact side and VAS scores for each interval is shown in Figs. 5 and 6. The mean values for all variables gradually improved over the year as the range of motion and grip increased and VAS scores decreased. At 12-month follow-up, there were no significant differences in VAS score and forearm range of motion on affected side in percentage of intact side among three groups. However, the evaluation results at 1 week, 1 month and 3 months after surgery showed that there were significant differences in VAS score and forearm range of motion on affected side in percentage of intact side among three groups, among which group B had lower VAS score and forearm range of motion on affected side in percentage of intact side (Tables 7 and 8).

Fig. 5
figure 5

One-year trend in VAS scores for groups A and B

Fig. 6
figure 6

One-year trend in forearm range of motion for groups A and B

Table 7 Comparison of VAS scores among patients at various time points postoperatively
Table 8 Comparison of forearm range of motion on affected side in percentage of intact side at various time points postoperatively

Discussion

Previously, non-surgical methods were commonly used for the treatment of fractures. However, there has been a shift in preference toward surgical interventions that aim to restore the anatomical integrity of the fractured area. Various treatment methods, such as percutaneous pinning, external fixation and dorsal and volar plating, have been developed and demonstrated favorable therapeutic outcomes. Plating exhibits several notable advantages over alternative technologies, such as extended exposure of distal radius fractures, precise reduction and stable fixation [15, 18,19,20]. Dorsal plating was used to buttress many distal radius fractures with dorsal collapse. Its wide application in clinics is limited by attrition from major hardware. Many studies have shown that dorsal plates can lead to the risk of tendon rupture [21, 22]. After 1 year of follow-up examination after surgery, fracture healing usually requires removal of the dorsal plates. Therefore, volar plating is increasingly popular because it can be supported at the distal articular surface to restore the anatomical position. In addition, the system restores and supports the metaphysis, helping to avoid loss of radial slope. At present, AO classification is commonly used worldwide for the preoperative diagnosis of fractures, which is conducive to the design of plate positions in advance. Chauffeur of distal radius pays attention to the injury of scaphoid ligament. The Frykman classification is based on the existence of a fractured ulnar styloid and extension of the fracture to radiocarpal and radioulnar joints. The shortcomings of this classification system are its inability to detect the amount of displacement, fragmentation and resulting shortness. The AO classification of distal radius fractures type A and C3 was excluded from this study. In the case of type A fractures with extraarticular fractures, manual reduction or Kirschner wire fixation is commonly used to protect the blood supply, promote early fracture healing and reduce the financial burden on the patient. For type C3 fractures with complex mass displacement, opening the pronator muscle and performing the surgery under direct vision was recommended to ensure satisfactory reduction and internal fixation. AO classification facilitated preoperative planning and intraoperative evaluation of plate position to avoid tendon irritation in the Soong classification [23, 24]. When fracture fixation conditions permit, positioning with a lower Soong-grade plate minimizes the risk of flexor tendon irritation and rupture. In this study, Soong classification can greatly reduce the interference in the approach through the tunnel behind the PQ muscle.

The PQ muscle is a thick rectangular muscle that arises from the distal ulna and is inserted into the distal radius. The PQ muscle includes superficial and deep components [25]. The superficial head plays a significant role in forearm pronation, and the deep head stabilizes the distal radioulnar joint. The latter prevents triangular fibrocartilage complex (TFCC) damage from impinging the styloid process of the ulna against the carpal bone. Preserving the integrity of the PQ muscle could facilitate blood supply to the area of the fractured distal radius fragment by the anterior interosseous artery [26]. Similarly, this study confirmed that among 95 patients with unstable distal radius fractures, the 27 cases undergoing traditional Henry approach without sparing PQ muscle demonstrated more bleeding, long duration of fracture healing. McConkey et al. [27] demonstrated that the function of the PQ muscle was closely related to pronation torque. The PQ muscles had the advantage of serving as a transfer graft. For example, they could cover the median god meridian during neuroma resection, neurolysis and palmar muscle deficiency. The sparing of the PQ muscle intraoperatively provides sufficient blood supply for fracture healing, confirmed in our previous work [15]. This study compared the outcomes of different methods of sparing the PQ muscle combined with the volar plate in treating distal radius fractures. There was no significant difference in mean bone union time due to the sparing of the anterior pronator muscle by different surgical methods. Nevertheless, there was significant significance in the mean operative time. The BR splitting approach for sparing PQ muscle had advantages over the volar plating insertion PQ muscle approach in exposing the fracture surface. Adequate intraoperative fracture exposure could greatly avoid a series of complications, such as traumatic arthritis, deformities, limited mobility and so on [15, 28].

The traditional Henry approach has been generally accepted by clinicians. The technique is accessed primarily through the interval between the flexor carpi radialis (FCR) and the radial artery. With the Henry approach, the PQ muscle must be released through an L- or Z-shaped incision. The traditional Henry approach without sparing PQ muscle is more dominant in exposing fractures. Therefore, adequate surgical field of view reduces intraoperative fracture reduction time. PQ muscle is a muscle-to-muscle repair, resulting in intraoperative repair difficulties and poor postoperative functional activity. Nevertheless, it has been reported that the repair of PQ muscle is beneficial to the later functional recovery of patients [29]. Whether to repair the pronator muscle intraoperatively and whether the function and efficacy of the postoperative wrist joints are affected are controversial. There were no significant differences in Disabilities of the Arm, Shoulder, and Hand (DASH) and pain scale scores one year postoperatively in a retrospective study [7] and a prospective randomized controlled study [30]. Sonntag [31] demonstrated in a prospective study that PQ muscle repair had no significant advantage in later functional recovery. At the same time, Sandra [9] demonstrated early pain relief with PQ muscle repair in a study of forearm pronation strength in 60 patients. A study on volunteers demonstrated that PQ anesthesia reduced its intensity by 21% [28]. Our previous work has also demonstrated that preserving the pronator muscle allows patients to return to normal life as soon as possible [15]. The anastomosis of the BR splitting approach for sparing PQ muscle through the PQ/BR complex is more robust than that of the traditional Henry approach. The space ulnar pull to the FCR exposed the fracture adequately, avoiding intraoperative damage to the palmar cutaneous branch of the median nerve. The superficial radial nerve and the radial artery were dissected and protected.

Rupture of the flexor tendon of the finger is an uncommon but serious complication after volar plate fixation of distal radius fractures [20]. Schrang et al. [32] suggested that the exposed volar plate was not covered by PQ and the possibility of flexor tendon irritation increased. Flexor tendinitis, including tendon rupture, is a possible complication. Lu et al. [33] advocated that repair of the PQ muscle might have a slight effect on pronation function, but it was not certain whether repair of the pronator muscle was a protective factor to prevent flexor tendon complications. Most clinicians believe that plate placement and PQ muscle maintenance play a significant role in prevention. A cross-sectional study [26] showed that more than 80 percent of surgeons chose to repair the PQ muscle. In addition to maintaining functional and stable components [34], the PQ muscle shield of the plate relative to the flexor tendon is meaningful in preventing tendon irritation or even tendon rupture [35]. Compared to group A and group B, the most common complications for traditional Henry approach without sparing PQ muscle of distal radius fractures include tendon irritation and delayed carpal tunnel syndrome. Symptoms disappeared in three groups after plate removal at the late 1-year follow-up.

This study observed minimal blood loss both prior to skin closure and following tourniquet release, occasionally obviating the necessity for a postoperative drainage system. The observed phenomenon can be attributed to the cushioning effect exerted by the intact PQ muscles on the plate. The PQ muscle assumes a crucial function as a protective barrier, impeding the infiltration of superficial infections into deeper tissues. This idea was confirmed in this study, wound infection did not occur in all patients in this study, and fractures healed well. According to the anatomical measurement of cadaver specimens and CT imaging studies, Jung et al. believed that inserting the distal row screw without cutting into the anterior rotator muscle was sufficient. Compared with other forearm muscles, the length of PQ muscle fibers was shorter, with an average length of 36.6 mm on the surface head and 23.0 mm on the deep head [12, 36]. In addition, overtight repair may result in ischemic contraction of PQ muscles or limit forearm rotation function due to transient dissociation of PQ muscles [37, 38]. Therefore, we believed that performing the surgery without releasing the PQ muscle was beneficial to the rotation function of the patients. The excellent function of the PQ muscle depends on typical anatomical structure. Therefore, the volar plating insertion PQ muscle approach with sparing integrality PQ muscle was superior to other operations in terms of early functional activity.

The objectives of treatment for distal radius fractures include minimizing pain in the wrists and promoting optimal forearm function [39, 40]. With the continuous progress of human society, patients' requirements for quality of life are increasing. In this study, we found a significant difference in average operating time. Compared to group A, the BR splitting approach took less time to treat distal radius fractures. The PQ/BR complex was flipped to the ulnar side, allowing the fracture to be fully exposed to facilitate fracture reduction and fixation. However, the volar plating insertion PQ muscle approach was superior to the BR splitting approach in early pain scores and functional activities. With the exercise of motor function and a decrease in VAS scores, the mean of all the variables improved over the course of the year.

The research possesses notable strengths. This study incorporated a consecutive inclusion of multiple patients classified under the AO system, thereby encompassing a wide range of distal radius fractures [41]. The prevalence of women aged 50 and above suggests a potential bias in the injury mechanism. Furthermore, it is noteworthy that all surgical procedures were executed by an identical medical team. Furthermore, the following data were collected from the study: (1) The BR splitting approach is more complex than the modified Henry approach and carries an increased risk of radial nerve superficial branch and radial artery and brachioradialis tendon; (2) the volar plating insertion PQ muscle approach sparing the PQ muscle can obtain good clinical effects after surgery, requiring detailed anatomical knowledge; (3) the distal end of the plate was below the watershed line of the distal radius; (4) compared with the traditional Henry approach, the incision of the BR splitting approach is 0.5 mm away from the radial side, which is helpful for exposing the brachioradialis tendon; (5) due to individual differences, the brachioradialis tendon in the styloid process of the distal radius is difficult to identify in some patients, but the brachioradialis tendon in the proximal end is easily identified and can be exposed retrogradely to the distal end; (6) implanted screws should be suitable to prevent injury to the dorsal extensor tendon; (7) surgeons can utilize arthroscopy to address concomitant soft tissue injuries [42]; (8) Kirschner wire prying reduction combined with manual assisted reduction; (9) the ‘carpal shoot-through view’ can be used to determine whether the screws fixing the metaphysis have penetrated the carpal joint cavity in the intraoperative fixation of distal radius the fracture; (10) pay attention to how long the tourniquet is in place.

Our study was subject to several limitations. First, the utilization of a retrospective design in this study resulted in the introduction of selection bias. Second, it was a single-center study and only included a subset of patients. We believe larger, multicenter, high-quality, randomized controlled trials could reinforce these conclusions. Third, the AO classification C3 type was not included in this study, which was expected to be overcome in future studies. Finally, we did not follow up with long-term efficacy. In addition, lack of evidence for postoperative verification of the PQ muscles is through magnetic resonance imaging (MRI) in all patients. Finally, the pronator teres and other forearm flexors may affect forearm rotation function and cannot be excluded.

Conclusion

Our results demonstrated that three different surgical approaches for distal radius fractures provided adequate fixation, satisfactory radiological and functional results for the management. The volar plating insertion PQ muscle approach could reduce early postoperative pain, promote early activity and return to normal life, while the BR splitting approach was more advantageous in intraoperative fracture exposure and could shorten the operative time. However, with the range of motion and grip increased and VAS scores decreased, at 12 months of follow-up, no significant advantage was seen in sparing the PQ muscle. Therefore, surgeons should be aware of their individual characteristics and choose patients carefully.

Availability of data and materials

The datasets analyzed during the current study are available from the corresponding author on reasonable request.

Abbreviations

PQ:

Pronator quadratus

FCR:

The flexor carpi radialis

VAS:

The visual analog scale scores

BR:

Brachioradialis

TFCC:

Triangular fibrocartilage complex

DASH:

Disabilities of the Arm, Shoulder, and Hand

MRI:

Magnetic resonance imaging

References

  1. de Alencar Neto JB, Jales CDS, Coelho JVV, de Souza CJD, Cavalcante MLC. Epidemiology, classification, and treatment of bilateral fractures of the distal radius. Acta Ortop Bras. 2022;30(3):e245185.

    PubMed  PubMed Central  Google Scholar 

  2. Lucke-Wold BP, Bonasso PC, Jacob G. Re-fracture of distal radius and hardware repair in the setting of trauma. Med Student Res J. 2017;5:2–7.

    PubMed  PubMed Central  Google Scholar 

  3. Ying L, Cai G, Zhu Z, Yu G, Su Y, Luo H. Does pronator quadratus repair affect functional outcome following volar plate fixation of distal radius fractures? A systematic review and meta-analysis. Front Med (Lausanne). 2023;10:992493.

    PubMed  Google Scholar 

  4. Lee JH, Ahn JT, Baek JH. Dorsal plating versus volar plating with limited dorsal open reduction in the management of AO type C3 distal radius fractures with impacted articular fragments: A retrospective comparative study. Acta Orthop Traumatol Turc. 2022;56(1):42–7.

    PubMed  Google Scholar 

  5. Smith DW, Henry MH. Volar fixed-angle plating of the distal radius. J Am Acad Orthop Surg. 2005;13(1):28–36.

    PubMed  Google Scholar 

  6. Mulders MAM, Walenkamp MMJ, Bos F, Schep NWL, Goslings JC. Repair of the pronator quadratus after volar plate fixation in distal radius fractures: a systematic review. Strateg Trauma Limb Reconstr. 2017;12(3):181–8.

    Google Scholar 

  7. Hershman SH, Immerman I, Bechtel C, Lekic N, Paksima N, Egol KA. The effects of pronator quadratus repair on outcomes after volar plating of distal radius fractures. J Orthop Trauma. 2013;27(3):130–3.

    PubMed  Google Scholar 

  8. Sen MK, Strauss N, Harvey EJ. Minimally invasive plate osteosynthesis of distal radius fractures using a pronator sparing approach. Tech Hand Up Extrem Surg. 2008;12(1):2–6.

    PubMed  Google Scholar 

  9. Haberle S, Sandmann GH, Deiler S, Kraus TM, Fensky F, Torsiglieri T, Rondak IC, Biberthaler P, Stockle U, Siebenlist S. Pronator quadratus repair after volar plating of distal radius fractures or not? Results of a prospective randomized trial. Eur J Med Res. 2015;20:93.

    PubMed  PubMed Central  Google Scholar 

  10. Johnson RK, Shrewsbury MM. The pronator quadratus in motions and in stabilization of the radius and ulna at the distal radioulnar joint. J Hand Surg Am. 1976;1(3):205–9.

    CAS  PubMed  Google Scholar 

  11. Armangil M, Bezirgan U, Basarir K, Bilen G, Demirtas M, Bilgin SS. The pronator quadratus muscle after plating of distal radius fractures: is the muscle still working? Eur J Orthop Surg Traumatol. 2014;24(3):335–9.

    PubMed  Google Scholar 

  12. Feeney MS, Wentorf F, Putnam MD. Simulation of altered excursion of the pronator quadratus. J Wrist Surg. 2014;3(3):198–202.

    PubMed  PubMed Central  Google Scholar 

  13. Hohendorff B, Knappwerth C, Franke J, Muller LP, Ries C. Pronator quadratus repair with a part of the brachioradialis muscle insertion in volar plate fixation of distal radius fractures: a prospective randomised trial. Arch Orthop Trauma Surg. 2018;138(10):1479–85.

    PubMed  Google Scholar 

  14. Hohendorff B, Unglaub F, Spies CK, Muller LP, Ries C. Repair of the pronator quadratus muscle with a part of the brachioradialis muscle insertion in volar plate fixation of a distal radius fracture. Oper Orthop Traumatol. 2020;32(1):82–6.

    CAS  PubMed  Google Scholar 

  15. Huang X, Jia Q, Li H, Kerem E, Peng C, Kong W, Tusunniyazi M, Hamiti Y, Feng D, Zhao Y. Evaluation of sparing the pronator quadratus for volar plating of distal radius fractures: a retrospective clinical study. BMC Musculoskelet Disord. 2022;23(1):625.

    PubMed  PubMed Central  Google Scholar 

  16. Kashir A, O’Donnell T. A brachioradialis splitting approach sparing the pronator quadratus for volar plating of the distal radius. Tech Hand Up Extrem Surg. 2015;19(4):176–81.

    PubMed  Google Scholar 

  17. Bergsma M, Doornberg JN, Borghorst A, Kernkamp WA, Jaarsma RL, Bain GI. The watershed line of the distal radius: cadaveric and imaging study of anatomical landmarks. J Wrist Surg. 2020;9(1):44–51.

    PubMed  Google Scholar 

  18. Nana AD, Joshi A, Lichtman DM. Plating of the distal radius. J Am Acad Orthop Surg. 2005;13(3):159–71.

    PubMed  Google Scholar 

  19. Satake H, Hanaka N, Honma R, Watanabe T, Inoue S, Kanauchi Y, Kato Y, Nakajima T, Sato D, Eto J, et al. Complications of distal radius fractures treated by volar locking plate fixation. Orthopedics. 2016;39(5):e893-896.

    PubMed  Google Scholar 

  20. Sato K, Murakami K, Mimata Y, Doita M. Incidence of tendon rupture following volar plate fixation of distal radius fractures: a survey of 2787 cases. J Orthop. 2018;15(1):236–8.

    PubMed  PubMed Central  Google Scholar 

  21. Chiang PP, Roach S, Baratz ME. Failure of a retinacular flap to prevent dorsal wrist pain after titanium Pi plate fixation of distal radius fractures. J Hand Surg Am. 2002;27(4):724–8.

    PubMed  Google Scholar 

  22. Via GG, Roebke AJ, Julka A. Dorsal approach for dorsal impaction distal radius fracture-visualization, reduction, and fixation made simple. J Orthop Trauma. 2020;34(Suppl 2):S15–6.

    PubMed  Google Scholar 

  23. Lutsky KF, Jimenez M, Rivlin M, Matzon JL, Maltenfort M, Beredjiklian PK. Reliability of the Soong classification for volar plate position. J Hand Surg Am. 2016;41(7):e199-202.

    PubMed  Google Scholar 

  24. DeGeorge BR Jr, Brogan DM, Shin AY. The relationship of volar plate position and flexor tendon rupture: should we question the validity of the Soong classification? Plast Reconstr Surg. 2020;146(3):581–8.

    CAS  PubMed  Google Scholar 

  25. Stuart PR. Pronator quadratus revisited. J Hand Surg Br. 1996;21(6):714–22.

    CAS  PubMed  Google Scholar 

  26. Haerle M, Schaller HE, Mathoulin C. Vascular anatomy of the palmar surfaces of the distal radius and ulna: its relevance to pedicled bone grafts at the distal palmar forearm. J Hand Surg Br. 2003;28(2):131–6.

    CAS  PubMed  Google Scholar 

  27. McConkey MO, Schwab TD, Travlos A, Oxland TR, Goetz T. Quantification of pronator quadratus contribution to isometric pronation torque of the forearm. J Hand Surg Am. 2009;34(9):1612–7.

    PubMed  Google Scholar 

  28. Liverneaux P, Ichihara S, Facca S, Hidalgo Diaz JJ. Outcomes of minimally invasive plate osteosynthesis (MIPO) with volar locking plates in distal radius fractures: a review. Hand Surg Rehabil. 2016;35S:S80–5.

    CAS  PubMed  Google Scholar 

  29. Swigart CR, Badon MA, Bruegel VL, Dodds SD. Assessment of pronator quadratus repair integrity following volar plate fixation for distal radius fractures: a prospective clinical cohort study. J Hand Surg Am. 2012;37(9):1868–73.

    PubMed  Google Scholar 

  30. Tosti R, Ilyas AM. Prospective evaluation of pronator quadratus repair following volar plate fixation of distal radius fractures. J Hand Surg Am. 2013;38(9):1678–84.

    PubMed  Google Scholar 

  31. Sonntag J, Woythal L, Rasmussen P, Branner U, Holmer P, Jensen AK, Lange KHW, Brorson S. No effect on functional outcome after repair of pronator quadratus in volar plating of distal radial fractures: a randomized clinical trial. Bone Joint J. 2019;101-B(12):1498–505.

    PubMed  Google Scholar 

  32. Ateschrang A, Stuby F, Werdin F, Schaller HE, Weise K, Albrecht D. Flexor tendon irritations after locked plate fixation of the distal radius with the 3.5 mm T-plate: identification of risk factors. Z Orthop Unfall. 2010;148(3):319–25.

    CAS  PubMed  Google Scholar 

  33. Lu CK, Liu WC, Chang CC, Shih CL, Fu YC, Jupiter JB. A systematic review and meta-analysis of the pronator quadratus repair following volar plating of distal radius fractures. J Orthop Surg Res. 2020;15(1):419.

    PubMed  PubMed Central  Google Scholar 

  34. Gordon KD, Dunning CE, Johnson JA, King GJ. Influence of the pronator quadratus and supinator muscle load on DRUJ stability. J Hand Surg Am. 2003;28(6):943–50.

    PubMed  Google Scholar 

  35. Arora R, Lutz M, Hennerbichler A, Krappinger D, Espen D, Gabl M. Complications following internal fixation of unstable distal radius fracture with a palmar locking-plate. J Orthop Trauma. 2007;21(5):316–22.

    PubMed  Google Scholar 

  36. Nho JH, Gong HS, Song CH, Wi SM, Lee YH, Baek GH. Examination of the pronator quadratus muscle during hardware removal procedures after volar plating for distal radius fractures. Clin Orthop Surg. 2014;6(3):267–72.

    PubMed  PubMed Central  Google Scholar 

  37. Berglund LM, Messer TM. Complications of volar plate fixation for managing distal radius fractures. J Am Acad Orthop Surg. 2009;17(6):369–77.

    PubMed  Google Scholar 

  38. Chloros GD, Papadonikolakis A, Ginn S, Wiesler ER. Pronator quadratus space and compartment syndrome after low-energy fracture of the distal radius: a case report. J Surg Orthop Adv. 2008;17(2):102–6.

    PubMed  Google Scholar 

  39. Mauck BM, Swigler CW. Evidence-based review of distal radius fractures. Orthop Clin North Am. 2018;49(2):211–22.

    PubMed  Google Scholar 

  40. Mirarchi AJ, Nazir OF. Minimally invasive surgery: is there a role in distal radius fracture management? Curr Rev Musculoskelet Med. 2021;14(1):95–100.

    PubMed  PubMed Central  Google Scholar 

  41. MacIntyre NJ, Dewan N. Epidemiology of distal radius fractures and factors predicting risk and prognosis. J Hand Ther. 2016;29(2):136–45.

    PubMed  Google Scholar 

  42. Shapiro LM, Kamal RN, Management of Distal Radius Fractures Work G, Nonvoting Clinical C, Nonvoting Oversight C, Staff of the American Academy of Orthopaedic S, the American Society for Surgery of the H. Distal radius fracture clinical practice guidelines-updates and clinical implications. J Hand Surg Am. 2021;46(9):807–11.

    PubMed  Google Scholar 

Download references

Acknowledgements

Not applicable.

Funding

This study was not funded by any foundation.

Author information

Authors and Affiliations

Authors

Contributions

XH conducted the study, collected, analyzed and interpreted the data and wrote the manuscript. BW interpreted the data. YH edited the manuscript and reviewed the manuscript. YZ planned the project and reviewed the manuscript. YT edited the manuscript. All authors read and approved the final manuscript. Xiaoxia Huang, Boyu Wu have contributed equally to this study.

Corresponding authors

Correspondence to Yan Zhao or Yong Teng.

Ethics declarations

Ethics approval and consent to participate

This retrospective study was approved by the Ethics Committee of The First Affiliated Hospital of Xinjiang Medical University and carried out in accordance with the ethical standards set out in the Helsinki Declaration. Informed consent was received from all participating.

Consent for publication

Written informed consent was obtained from the patient for publication of this case report and any accompanying images. A copy of the written consent is available for review by the Editor of this journal.

Competing interests

The authors declare that they have no conflict of interest. The authors report no proprietary or commercial interest in any product mentioned or concept discussed in this article.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Huang, X., Wu, B., Hamiti, Y. et al. Evaluation of the treatment of distal radial volar fracture by different methods sparing the pronator quadratus. J Orthop Surg Res 18, 722 (2023). https://doi.org/10.1186/s13018-023-04184-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s13018-023-04184-8

Keywords