Synchronous Signal Transmission Method of Minimally Invasive Renal Failure Surgery Based on Nano Molecular Image Probe

The synchronous signal transmission can promote the successful completion of minimally invasive renal failure surgery, so the synchronous signal transmission method of minimally invasive renal failure surgery based on nano molecular image probe is studied. The nanoprobe is constructed by loading different signal molecules, photosensitizers, acoustic sensitizers and thermosensitives through the method of double emulsion or film hydration; the near-infrared confocal endoscope molecular image diagnosis and treatment equipment is designed based on the nanoprobe, and the intraoperative highfrequency image is obtained through the diagnosis and treatment equipment; the high-frequency injection energy and signal synchronous transmission method is adopted, and the signal is added to the primary and secondary resonance circuit. In the coupling module, a higher frequency alternating signal is added into the resonant coupling voltage to modulate the signal into the transmission resonance system, which is transmitted from the energy transmission coupling coil to the secondary end, and the injected signal part of the coupling coil is demodulated at the other end to complete the transmission of the signal coupling transmission loop, so as to realize the high-frequency image energy and index data signal of minimally invasive renal failure surgery. The experimental results show that the designed nano molecular image probe has good stability, and the simulated signal transmission waveform is consistent with the transmission waveform of the principle analysis. Applying the proposed method to the minimally invasive surgery of renal failure, it is found that the success rate and image signal transmission efficiency of the minimally invasive surgery of patients 1–5 are higher than 99.5%, and the operation image transmission accuracy is high and the operation effect is excellent.