Abstract
The effects of the end conditions of cross-ply laminated composite beams on their dimensionless natural frequencies of free vibration is investigated. The problem is analyzed and solved by using the energy approach, which is formulated by a finite element model. Various end conditions of beams are used. Each beam has either movable ends or immovable ends. Numerical results are verified by comparisons with other relevant works. It is found that more constrained beams have higher values of natural frequencies of transverse vibration. The values of the natural frequencies of longitudinal modes are found to be the same for all beams with movable ends because they are generated by longitudinal movements only.
Similar content being viewed by others
References
H. Abramovich and A. Livshits, “Free Vibrations of Non-Symmetric Cross-Ply Laminated Composite Beams,” J. Sound Vibrat. 176 (5), 597–612 (1994).
S. Marur and T. Kant, “Free Vibration Analysis of Fiber Reinforced Composite Beams using Higher order Theories and Finite Element Modelling,” J. Sound Vibrat. 194 (3), 337–351 (1996).
J. Njuguna, H. Su, C. W. Cheung, and J. R. Banerjee, “The Influence of Ply Orientation on the Free Vibration of Composite Beams,” in Composite Systems—Macrocomposites, Microcomposites, Nanocomposites, Proc. of the Int. Conf., Sydney Australia, July 21–25, 2002.
M. Aydogdu, “Vibration Analysis of Cross-Ply Laminated Beams with General Boundary Conditions by Ritz Method,” Int. J. Mech. Sci. 47 (11), 1740–1755 (2005).
M. Aydogdu, “Free Vibration Analysis of Angle-Ply Laminated Beams with General Boundary Conditions,” J. Reinforced Plastics Composites 25 (15), 1571–1583 (2006).
P. Vidal and O. Polit, “A Family of Sinus Finite Elements for the Analysis of Rectangular Laminated Beams,” Composite Structures 84 (1), 56–72 (2008).
P. Vidal and O. Polit, “Vibration of Multilayered Beams Using Sinus Finite Elements with Transverse Normal Stress,” Composite Structures 92 (6), 1524–1534 (2010).
P. Vidal and O. Polit, “A Sine Finite Element Using a Zig-Zag Function for the Analysis of Laminated Composite Beams,” Composites, B: Engineering 42 (6), 1671–1682 (2011).
E. Carrera, G. Giunta, P. Nali, and M. Petrolo, “Refined Beam Elements with Arbitrary Cross-Section Geometries,” Comput. Structures 88 (5), 283–293 (2010).
F. Biscani, G. Giunta, S. Belouettar, et al., “Variable Kinematic Beam Elements Coupled via Arlequin Method,” Composite Structures 93 (2), 697–708 (2011).
G. Giunta, F. Biscani, S. Belouettar, et al., “Free Vibration Aanalysis of Composite Beams via Refined Theories,” Composites, B: Engineering 44 (1), 540–552 (2013).
J. Li, Z. Wu, X. Kong, and W. Wu, “Comparison of Various Shear Deformation Theories for Free Vibration of Laminated Composite Beams with General Lay-Ups,” Composite Structures 108, 767–778 (2014).
G. A. Hassan, M. A. Fahmy, and I. M. Goda, “The Effect of Fiber Orientation and Laminate Stacking Sequences on the Torsional Natural Frequencies of Laminated Composite Beams,” J. Mech. Design Vibrat. 1 (1), 20–26 (2013).
A. Pagani, E. Carrera, M. Boscolo, and J. R. Banerjee, “Refined Dynamic Stiffness Elements Applied to Free Vibration Analysis of Generally Laminated Composite Beams with Arbitrary Boundary Conditions,” Composite Structures 110, 305–316 (2014).
K. Torabi, M. Shariati-Nia, and M. Heidari-Rarani, “Experimental and Theoretical Investigation on Transverse Vibration of Delaminated Cross-Ply Composite Beams,” Int. J. Mech. Sci. 115, 1–11 (2016).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.F.A. Algarray, H. Jun, I.-E.M. Mahdi.
Rights and permissions
About this article
Cite this article
Algarray, A.F.A., Jun, H. & Mahdi, IE.M. Effects of End Conditions of Cross-Ply Laminated Composite Beams on Their Dimensionless Natural Frequencies. J Appl Mech Tech Phy 58, 1108–1114 (2017). https://doi.org/10.1134/S0021894417060177
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894417060177